Spray Booths Follow safe operating instructions
Spray-finishing operations Organic materials Inorganic materials Dispersed form Deposited to coat, treat, or clean 1a
Spray-finishing deposition Automatic Manual Electrostatic 1b
Spray-finishing does not include Metal spraying Dipping Flow coating Roller coating Self-contained washing systems 1c
Spray booths Enclose or confine operations Located per NFPA No 33-1969
Spray booths, rooms Not needed to spray: Building exteriors Fixed tanks Structures 2b
Spray booths, rooms Not needed for temporary use of small portable spraying apparatus 2c
Spray booths design and construction 29 CFR 1910.107 NFPA No. 33-1969 3a
Spray booths design and construction Lights Motors Electrical Ignition sources No combustible construction materials 3b
Spray booths design and construction Walkways Baffles Distribution plates Overspray collectors 3c
Spray booths design and construction Wet or water wash Collecting tanks Pumps 3d
Spray rooms design and construction Masonry Concrete Noncombustible Fire doors Ventilation 4a
Ventilation 29 CFR 1910.107 NFPA No. 33-1969 Inlet ductwork Exhaust ductwork 5a
Air flow Adequate air replacement Adequate air velocity 6a
Air replacement Replacement air comes in "upstream" or above object being sprayed 6b
Air volume Dilutes solvent vapor At least 25% of solvent's LEL 6c
Air flow Operator "downstream" from object must wear approved respirator 6d
Make-up air Self-closing doors, dampers, louvers Filtered air supply Heating make-up air 7a
Flammable and combustible liquids 29 CFR 1910.106 One day, one shift supply Bulk storage separate Approved closed containers, piping 8a
Flammable and combustible liquids Dispense with ventilation Feed system capacity limits Hose connection shutoffs Ground and bond piping 8b
Sprinkler systems, extinguishers 29 CFR 1910.159 Clear access to controls Sprinkler head cleaning Portable fire extinguishers 9a
Operation and maintenance Spray in spray areas Clean from deposits, residues Non-sparking tools Remove, dispose of residue Approved, metal waste cans 10a
Operation and maintenance Metal lockers Cleaning solvent flash points Ventilation during cleaning Non-hazardous combinations "No Smoking" signs 10b
Drying Increased temperature hazards Maintain ventilation 11a
Electrostatic or powder coating Safe distance between goods and conductors Sign showing safe distance Warning to ground equipment 12a
Organic peroxides "No Smoking" sign Non-sparking tools 12b
Automotive undercoating exemptions Adequate ventilation No more hazardous than kerosene Flash point greater than 100 deg. F 13a