DCS WG report 9/09/11 FV.

Slides:



Advertisements
Similar presentations
JCOP FW Update ALICE DCS Workshop 6 th and 7 th October, 2005 Fernando Varela Rodriguez, IT-CO Outline Organization Current status Future work.
Advertisements

PVSS and JCOP Framework Organization, Support & News Oliver Holme IT-CO.
Electrical distribution for ALICE experiment & Electronic Rack Control S. Philippin.
Experiment Control Systems at the LHC An Overview of the System Architecture An Overview of the System Architecture JCOP Framework Overview JCOP Framework.
Supervision of Production Computers in ALICE Peter Chochula for the ALICE DCS team.
Uli Schäfer Discussions with H.B. after last meeting… All ATLAS standard racks and crates will be monitored. Helfrieds group will equip them with ELMBs.
Robert Gomez-Reino on behalf of PH-CMD CERN group.
09/11/20061 Detector Control Systems A software implementation: Cern Framework + PVSS Niccolo’ Moggi and Stefano Zucchelli University and INFN Bologna.
SMACS Slow Monitor And Control System Developed system for CDF-TOF proposed for Atlas-MDT/RPC.
+ discussion in Software WG: Monte Carlo production on the Grid + discussion in TDAQ WG: Dedicated server for online services + experts meeting (Thusday.
S.Sergeev (JINR). Tracker consists of  4 chambers of 4 views each In total ~7200 drift tubes (~450 per view) To be controlled/monitored  HV system.
LKr Calorimeter Control and monitoring R. Fantechi 19/02/2010 R. Fantechi.
Update on Database Issues Peter Chochula DCS Workshop, June 21, 2004 Colmar.
1 5 December 2012 Laurent Roy Infrastructure / Electronics Upgrade -Cabling (long distance) -Rack and Crate (space, electrical distribution, cooling) -Detector.
15/12/10FV 1 Common DCS hardware. General ideas Centralized system: o Common computers. Detector dedicated computers (with detector participation) only.
ATCA based LLRF system design review DESY Control servers for ATCA based LLRF system Piotr Pucyk - DESY, Warsaw University of Technology Jaroslaw.
André Augustinus 17 June 2002 Technology Overview What is out there to fulfil our requirements? (with thanks to Tarek)
Controls EN-ICE LAV Environment Monitor Jonás Arroyo CERN EN/ICE-SCD 6 th April 2011.
Controls EN-ICE Finite States Machines An introduction Marco Boccioli FSM model(s) of detector control 26 th April 2011.
Giovanni Polese1 RPC Detector Control System for MTCC Pierluigi Paolucci, Anna Cimmino I.N.F.N. of Naples Giovanni Polese Lappeenranta University.
André Augustinus 10 March 2003 DCS Workshop Detector Controls Layout Introduction.
15-16/3/04 DCS workshop G. De Cataldo, A,.Franco and A. Tauro 1 Answers from the HMPID to the ACC questions 1.Concerning global DCS overview drawing 2.Concerning.
R. Fantechi. TDAQ commissioning Status report on Infrastructure at the experiment PC farm Run control Network …
André Augustinus 16 September 2002 PVSS & Framework How to get started.
CERN, O.Pinazza: ALICE TOF DCS1 ALICE TOF DCS Answers to DCS Commissioning and Installation related questions ALICE week at CERN O. Pinazza and.
Status of NA62 straw electronics Webs Covers Services Readout.
LKR Working group Introduction R. Fantechi October 27 th, 2009.
Alice DCS workshop S.Popescu 1 1. News from TPC DCS cooling prototype Project overview: Aim of the prototype: investigating and developing standard.
André Augustinus 16 June 2003 DCS Workshop General Purpose Monitor.
ISEG HV power supplies for NA62 R. Fantechi 6/4/2011.
Alice MTR DCS F.Jouve 15 th DCS workshop CERN 13/03/2006 UX-A,B,D Detector PVSS II Detector Ethernet Database(s) OPC client DIM client 1672 Detector ?
Installation status Control Room PC farm room DetectorsEB Infrastructure 918 ECN3.
Fifth CMS Electronics Week EASY: a new SY1527-based Embedded Assembly SYstem May 7th, 2003 CAEN SpA.
1 Calorimeters LED control LHCb CALO meeting Anatoli Konoplyannikov /ITEP/ Status of the calorimeters LV power supply and ECS control Status of.
European Organization for Nuclear Research DCS remote control in NA62: Equipment & Control Integration. Mathias Dutour NA62 Collaboration 9th December.
R. Fantechi. Shutdown work Refurbishment of transceiver power supplies Work almost finished in Orsay Small crisis 20 days ago due to late delivery of.
S.Sergeev (JINR). Tracker consists of  4 stations of 4 views (planes) each In total ~7200 drift tubes (~450 per view) To be controlled/monitored 
22/03/11FV 1 NA62 DCS CAN bus lines. Short reminder General properties of CAN bus o Up to 64 nodes on one bus o Different devices need different buses.
T0 DCS Status DCS Workshop March 2006 T.Karavicheva on behalf of T0 team.
DCS workshop,march 10th P.Saturnini, F. Jouve Slow control trigger of the muon arm Muon trigger of the muon arm Low voltage VME Crate External parameters.
André Augustinus 17 June 2002 Detector URD summaries or, what we understand from your URD.
D. EliaALICE week / DCS workshop - Sept 20, SPD Power Supply System DCS status Domenico Elia INFN Bari.
10/09/10FV 1 News and observations from Brussels' meeting.
JCOP Framework and PVSS News ALICE DCS Workshop 14 th March, 2006 Piotr Golonka CERN IT/CO-BE Outline PVSS status Framework: Current status and future.
R. Fantechi 2/09/2014. Milestone table (7/2014) Week 23/6: L0TP/Torino test at least 2 primitive sources, writing to LTU, choke/error test Week.
09/09/10FV 1 NA62 common crate project. Crates survey result VF2 09/09/10 VME High populated TELL1 High populated TELL1 (Spare) Low populated TELL1 Low.
FPix DCS Subgroup Report
DCS, DOMs and interplay with Run Control
LKr status R. Fantechi.
09/02/2006 Muon week HV and LV systems status for Magnet Test S. Braibant, P. Giacomelli, M. Giunta.
Online Control Program: a summary of recent discussions
ATLAS MDT HV – LV Detector Control System (DCS)
CMS – The Detector Control System
T1 Electronic status Conclusions Electronics Cards:
Mini-drawers, FE-ASIC , Integrator
DCS WG report 9/09/11 FV.
Robert Gomez-Reino Garrido
Pierluigi Paolucci - I.N.F.N. Naples
The LHCb Run Control System
The IFR Online Detector Control at the BaBar experiment at SLAC
RPC Detector Control System
TPC Detector Control System
The IFR Online Detector Control at the BaBar experiment at SLAC
The Online Detector Control at the BaBar experiment at SLAC
RPC Detector Control System
RPC Detector Control System
Pierluigi Paolucci & Giovanni Polese
Pierluigi Paolucci & Giovanni Polese
Pierluigi Paolucci & Giovanni Polese
Presentation transcript:

DCS WG report 9/09/11 FV

DCS main activities (April – September) LAV storage area temperature monitoring system HV system – participation in tender preparation User Requirements LKr calorimeter High and Low voltage vertical slice 09/09/11 VF

LAV storage area temperature monitoring system The system is running permanently starting from March 2011: Archiving of temperatures in an Oracle DB SMS in case of alarm Nightly mail reports Adaptation to new stations position LAV storage area in ECN3 Powerful trend tool 09/09/11 VF

HV system – participation in tender preparation Technical Specification for “High Voltage power supply system for photomultiplier tubes” prepared by Riccardo and Paolo LAV: 2496 channels MUV: 560 channels CEDAR: 256 channels Grand total: 3312 channels Software requirements prepared by DCS team and EN/ICE 09/09/11 VF

User Requirements Definition of Hierarchical Control and detector operation models. Two options are under evaluation. LHC like NA48 like A discussion of the differences needs an introduction and will happen on first DCS Users meeting in October. The LKr vertical slice includes both options and will be used for an assessment E-mail users survey concerning of 2 special cases of system behavior during data taking: Should we allow an automatic HV channel trip recovery (YES with parameterization) Should we allow playing with individual HV(LV) channel (YES with special flag) Strong appeal for general policy. An DCS users meeting will be organized in October 09/09/11 VF

User Requirements - 2 User Interface Study of other experiments example (CMS, COMPASS). Other will come soon. Development of generic HV channel table panel (the HV channels represent of about 60% of all channels) Table prototype 244 channels in one table Zoom out right column Sliding selection window 09/09/11 VF

Prototype of Generic HV channel table panel Beginning of the table End of the table 09/09/11 VF

Sub-detector user requirements LAV, STRAW, MUV, SAC/IRC - preliminary UR were presented in December 2010. Detailed version should be prepared ASAP RICH User requirement document – example to follow General description of detector Detector Logical structure Detailed description of each sub-system including: General requirements Logical names Hardware description and naming scheme Hierarchical control and alarms User Interface The document is available on EDMS Number 1160153  v.1 All sub-detectors participating in Technical Run should prepare an URD and put in on EDMS this year 09/09/11 VF

LKr High and Low voltage vertical slice Motivations and constrains: LKr High and Low voltage system already exists and will be used in NA62 without modification Excellent current and high voltage measurement system, good quality cables and patch panels – everything is worth to keep Heavy integration of custom made system is preferable now when the most other equipment is not yet available The “Vertical slice” should include and validate whole DCS chain from the sensors to an user interface and ORACLE Data Base 09/09/11 VF

LKr High and Low voltage vertical slice - 2 Short reminder : Transceivers and Preamplifiers power supplies 27 transceivers PS’s 4 preamplifiers PS’s 64 regulator boards Commands: ON/OFF Reading: Status ON/OFF About 500 low voltage channels 09/09/11 VF

LKr High and Low voltage vertical slice - 3 Short reminder : HV power supply system SY127 In spill, Out of spill current measurement Front Back LKr All cells of calorimeter are grouped in 32 columns 30 columns are powered by 1 HV channel of CAEN Power supply 2 high current columns are powered by an individual HV channel each Custom made VME based system measures 32 “In” and “Out of” spill currents Output voltages Output voltage measurement 09/09/11 VF

LKr vertical slice - 4 Back-end computer: HP ProLiant BL460c ORACLE DB Front-end computer: KONTRON KISS 4U PC: OPC servers Back-end computer: HP ProLiant BL460c G7 Server Blade: PVSS application (hosted in CCC farm area) User Interface PC (s) CAN branch power supply ELMB based analog signals reading SY2527 HV Power supply PLC based digital I/O 27 transceivers PS’s 4 preamplifiers PS’s 64 regulator boards: about 500 channels in total VME based CPU: DIM server 09/09/11 VF

New control for LKr High Voltage system The SY127 is replaced by SY2527 HV Power supply: Ethernet interface CAEN OPC server JCOP supported component SY2527 Custom current and voltage measurement system, VME based CPU. Old communication layer is replaced by DIM (Distribute Information Management system) Old hardware synchronisation is replaced by DIM signals In spill, Out of spill current measurement Front LKr Output voltage measurement 09/09/11 VF

LKr High Voltage system – Integration in PVSS 3 active SY2527 channels + 3 spares 32 “In” and “Out of” spill current + Vout readings 09/09/11 VF

LKr LV power supplies DCS rack Back Cables from the power supplies and regulator boards are routed to DCS rack in the Electronic Barrack. In the rack the digital (switch ON/OFF command and ON/OFF status) and analog (voltages, currents and temperatures ) signals are split Front The old system was based on: G64 Analog Multiplexer system VME/G64 Interface (SL/RF) Motorola MVME167 processors Greenspring VIPC610 IndustryPack carrier Various IP Carrier (PT100 conditioning, ADC, Digital I/O) 09/09/11 VF

New control for LV power supplies – PLC based digital I/O The preamplifier power supplies are equipped with a contact which reflects ON/Off state of the supply All power supplies can be switched ON/OFF by means of short closing of corresponding contact Taking into account requested reliability of the information and commanding, a PLC (Programmable Logic Controller) based solution was chosen. The system is using SIEMENS S7-300 equipment with full hardware and software support from EN/ICE Some spare I/O channels are available 09/09/11 VF

LV power supplies – ELMB based analog signals reading The ELMB is the only budget analog signal reading device fully supported by the JCOP framework community Existing cables and patch panels are good quality and worth to be reused The idea was to replace existing G64 multiplexor cards by new ELMB adaptor card and keep whole chain up to the multiplexor intact 09/09/11 VF

LV power supplies – ELMB base analog signals reading G64 multiplexor card A new ELMB adaptor card was developed for replacement of existing G64 multiplexor card ELMB The ELMB is fully supported by JCOP framework community ELMB adaptor card 09/09/11 VF

LV power supplies – ELMB based analog signals reading Old G64 system New ELMB based system 09/09/11 VF

LKr vertical slice – PVSS implementation Preamplifier power supply monitoring Navigation Tree with Hierarchical control colors Regulator boards monitoring 09/09/11 VF

LKr vertical slice – other main features Two levels computer structure: Multi slots front-end (7PCI 32 bits, 3 PCI_e x 1, 1 PCI_e x 16) Powerful back-end (24 logical cores (12 physical), at 2.8GHz, 12 GB of RAM, etc…) Full CANbus branch, including branch power supply Hierarchical Control ORACLE DB: Archiving Configuration Alarms, Trends, Navigation, Access Control, etc… 09/09/11 VF

Credits High Voltage power supply system Technical Specification Benjamin Farnham (EN/ICE-SIC) Generic HV channel table panel Roman Fedoseev (EN/ICE-SCD) LKr HV system Brian James O'Connell Riccardo Fantechi LKr LV system Jeronimo Ortola Vidal (EN/ICE-PLC) LKr Vertical Slice integration and PVSS implementation Jonas Arroyo Garcia (EN/ICE-SCD) Coordination, support, motivation, etc : Piotr Golonka (EN/ICE-SCD) Valeri Falaleev 09/09/11 VF

Plans Integration run (shifted to the end of January 2012) Main goals: First attempt of external contribution integration. Assessment of CPU power. Hardware to control LKr (~ 600 channels) STRAW tracker hardware (1 module ~ 500 channels) RICH HV system with a few loaded channels (500 channels) About 1600 channels in total – ¼ of full system DCS hardware – the same as was used in the LKr vertical slice Sergey Sergeev should come at least 2 weeks in advance 9/09/11 VF

DCS plans - 2 Dry DCS test run (May 2012 ) Main goal: Validation of all control solutions and confirmation of CPU power. The success of this run will depend a lot on availability of hardware. Hardware : all detectors participating in Technical Run 8 (9) LAV stations: HV (all power supplies should be available) + some FE crates (≥ 1 should be available) + some thresholds reading (≥ 1 FE board should be available) 1 (2) STRAW tracker module: HV(should be available) + LV(should be available) + ELMBs MUV2 and 3 (full system): HV (all power supplies should be available) + ELMBs CEDAR (full system): HV (all power supplies should be available) + FE crate (≥ 1 should be available) + NINO parameter setting/reading (≥ 1 FE board should be available) + ELMBs + cooling system? LKr (already integrated in Vertical Slice) CHOD (existing NA48)? 60-80% of hardware participating in TR The same rule as for the TDAQ: the hardware for which the control will not be tested in the dry DCS run will not be controlled during the Technical run 9/09/11 VF

DCS plans - 3 Dry DCS test run (May 2012 ) - continuation DCS hardware: Additional 3 front-end computers (KONTRON) New 3 data servers We are considering 2 options Reinforced version of PC farm computer (do we know the model?) Rack mounted version of CCC blades The model should be selected this year Software Final version of everything including FE boards control ORACLE Data Base Do other NA62 users plan use the ORACLE in 2012? Coordination question: Will we have general NA62 policy (and responsible) regarding the ORACLE (remember the ORACLE service is not for free) External development (and developers) should be available 2-3 weeks in advance 9/09/11 VF