1. 09/02/2006
Muon week
HV and LV systems status for Magnet Test S. Braibant, P. Giacomelli, M. Giunta

2. DT setup for Magnet test
Subsystems centrally controlled HV LV
Minicrates (DAQ and trigger)
RunControl
09/02/2006
HV, LV systems status for Magnet Test

3. Magnet test and cosmic challenge
We plan to have 3 DT sectors in 2 wheels (YB+2 and YB+1) ~ total of 14 DTs.
HV needs:
1 SY1527, 5 A876 and 14 A877. We are ready to use a version of HV DCS which is completely integrated with the DCS of CMS (done in January 2005). This version uses FSM and Configuration and Condition DBs. We can access our data also from Oracle with ROOT.
LV Needs:
2 A3486, 1 A1676A, 5 A3009, 8 A3050, 2 A3100. We just received part of this material and have developed the PVSS control project for this EASY equipment.
09/02/2006
HV, LV systems status for Magnet Test

4. HV, LV systems status for Magnet Test
HV Hardware setup
Global HV+
Global HV- LV
A877  powers 1 DT
A876
HV THETA
HV PHI1
HV PHI2
MacroChannels
(Set ON/OFF, RuP,…)
HV LAYER1
OutputChannels
(Set V0, i0…)
Wires1
Wires0
Cathodes
Strips
09/02/2006
HV, LV systems status for Magnet Test

5. HV, LV systems status for Magnet Test
HV Magnet Test
YB+1
HV +,- (x5)
Counting room
1 Kerpen
LV (x5)
SY1527
A877
A877
A877
A877
A877
Patch panel
A876
A876
A876
A876
A876
5 A876
Comm. (x2)
1 LV Novacavi
5 A877
HV-
HV+ LV
1 Comm. Novacavi
Comm.
YB+2
HV +,- (x9)
A877
Comm. (x3)
Patch panel
Patch panel
A877
A877
A877
A877
A877
A877
A877
A877
1 Kerpen
1 Comm. Novacavi
2 LV Novacavi
1 A876 = 1 Comm.
4 LV
4 HV+
4 HV-
LV (x9)
9 A877
09/02/2006
HV, LV systems status for Magnet Test

6. HV, LV systems status for Magnet Test
LV Magnet Test (solution 1a)
Counting room
Comm.
Comm.
EASY 3000
A3486
A1532
A1676
Serv.
Serv.
CH0
48 V Power
Comm.
48V
Comm.
EASY 3000 IN
OUT
Serv.
A3486
Serv.
CH0
CH1
EASY 3000
Comm. IN
Patch panel ?
Serv.
48 V Power
09/02/2006
HV, LV systems status for Magnet Test

7. HV, LV systems status for Magnet Test
LV Magnet Test (solution 1b)
Counting room
Comm.
Comm.
EASY 3000
A3486
A1532
A1676
Serv.
Serv.
CH0
48 V Power
Comm.
48V
Comm.
EASY 3000 IN
OUT
Serv.
A3486
Serv.
CH0
CH1
EASY 3000
Comm. IN
Patch panel ?
Serv.
48 V Power
09/02/2006
HV, LV systems status for Magnet Test

8. HV, LV systems status for Magnet Test
HV Sector Test
HV+ x 4
HV- x 4
4 A877
A876
A877
A877
A877
A877
SY1527
LV x 4
Comm.
1 A876 = 1 Comm.
4 LV
4 HV+
4 HV-
09/02/2006
HV, LV systems status for Magnet Test

9. HV, LV systems status for Magnet Test
LV Sector Test
LV Rack
48 V Serv.
(cable missing)
A1676
48 V
Serv.
SY1527
Comm.
EASY 3000
Comm. (flat 50 pins)
(cable missing)
A3486
48 V Power
A1676 can be housed in the same SY1527 also used for the A876 (HV)
09/02/2006
HV, LV systems status for Magnet Test

10. HV, LV systems status for Magnet Test
HV hardware SY
A876 5 A
Crates 3
HV cables
Patch panels Counting room 2
Patch panels Wheels 2
Kerpen cables ~ 100 m 2
Novacavi LV cables ~ 100 m 3
Novacavi communication cables 2
Cables in counting room
HV cables (SHV connectors) ~ 2 m 28
LV cables ~ 2 m 14
Communication cables ~ 2 m 5
Cables on wheels
HV cables (SHV connectors) ? m 28
LV cables ? m 14
Communication cables ? m 5
Communication cables ~ 10 cm 9
09/02/2006
HV, LV systems status for Magnet Test

11. HV, LV systems status for Magnet Test
LV hardware SY
A1676A 1-2 A
EASY A A A
Now Missing A A
Easy A A
LV Cables
Communication
Cables SCEM ~ 100 m 2
Cables SCEM ~ 2-3 m 2-3
48V Service
Cables (connectors PP75 -> PP45) ~ 100 m 2
Cable (banana plug -> PP45) ~ 3 m 1
Cables (connectors PP45 -> PP45) ~ 2-3 m 3
48V Power
Cables (connectors PP75 -> PP75) ~ 2-3 m 3
09/02/2006
HV, LV systems status for Magnet Test

12. Magnet test and cosmic challenge
We want to test the complete HV chain using the final Kerpen and Novacavi cables, and the patch panels which connect the A876 boards located in the control room to the A877 boards located in the racks on the detector balconies. We have to prepare the cables (material is available) and the patch panels.
Will use 2 rack mounted PCs: 1 for the HV control and one for the DT supervisor and the LV control.
09/02/2006
HV, LV systems status for Magnet Test

13. Some slides from PVSS HV control software running at SX5 control room
09/02/2006
HV, LV systems status for Magnet Test

14. HV, LV systems status for Magnet Test
09/02/2006
HV, LV systems status for Magnet Test

15. HV, LV systems status for Magnet Test
09/02/2006
HV, LV systems status for Magnet Test

16. HV, LV systems status for Magnet Test
09/02/2006
HV, LV systems status for Magnet Test

17. HV, LV systems status for Magnet Test
09/02/2006
HV, LV systems status for Magnet Test

18. HV, LV systems status for Magnet Test
09/02/2006
HV, LV systems status for Magnet Test

19. HV, LV systems status for Magnet Test
Conclusions
For the magnet test we plan to power a total of 14 DTs in sector 10 of wheel YB+1 and sectors 10 and 11 of wheel YB+2.
The HV system used will be the final one manufactured by CAEN. PVSS project with FSM integrated with the central CMS DCS will be available for both HV and LV systems. First prototype PVSS project already running at SX5.
We are missing some EASY modules. We did not order 1 A3009 and 1 A3050.
Want to use final cables, patch panels, etc. which so far we are missing for both HV and LV.
09/02/2006
HV, LV systems status for Magnet Test