IS20 Instrument System Level 200 Inge Kvalbein Product Expert

IS20 GRAPHIC LCD matrix display –Offers a variety of data pages –Depth histogram –NAV motorway –Engine data IS20: Introduction

IS20 COMBI –Speed in large characters –Depth in large characters –Depth, speed and temperature, tri-data, in 2 or 3 lines (windows ) –Trip log and passage timer –Race timer and log IS20: Introduction

4 analogue instruments: IS20 WIND IS20 TACK IS20 COMPASS IS20 RUDDER IS20: Introduction

Day and night palette provide improved readability in all conditions IS20 instrument system

Graphic Datapages The IS20 Graphic is pre-configured with 8 instrument pages, of which 2 are disabled. The instrument will scroll through the pages by using the Up and Down keys. IS20 Instrument system

Single (Graphic) instrument with transducer IS20: System overview

Expanded system IS20: System overview

IS20 Components parts and accessories Wind Transducer Robust, lightweight SimNet wind transducer Quick release mounting system

IS20 Components parts and accessories Transducers: DST800, DT800, ST850 (from Airmar) 235KHz active depth transducers Retractable with self closing valve Through hull low profile Note that DT800 has a 12 deg. tilted element

SimNet Simrad Intelligent Marine Network 3 SimNet rules: 1.The network must have 12 Volt supply 2.The network must be terminated 3.Reset network also when replacing a transducer

IS20 Panel mounting IS20 Installation

IS20 Bracket mounting (optional) IS20 Installation

IS20 Wind Vane, bracket mounting BOW Cable exit point IS20 Installation

Fitting the masthead bracket IS20 Installation

Attaching and removing the Wind Vane IS20 Installation

Transducer mounting

IS20 Installation Cable connection

IS20 Installation NMEA0183 input

IS20 Graphic First time start-up IS20 Installation

Language selection

IS20 Installation Changing the units of measure

IS20 Installation Automatic source update

IS20 Installation Displaying source information

IS20 Graphic/Combi Soft keys When the basic operation of the keys are changed, soft key symbols will be displayed right above the keys to indicate the alternate function. IS20 Operation

Menu flow chart

IS20 Graphic setup IS20 Operation

IS20 Graphic, disable pages IS20 Operation

IS20 Graphic Enabling a page IS20 Operation

IS20 Graphic Data page windows IS20 Operation

IS20 Graphic Changing page layout IS20 Operation

IS20 Graphic Depth offset The symbol in front of the depth reading will change to indicate that the depth is measured from: the keelorthe water line IS20 Operation

IS20 Instrument system Alarm codes

IS20 Analog, alarms Alarm ID –ShAL –dEEP –AnCh –chnG –High –Lo –oFF.C –Er.xx –AL.xx Alarm –Shallow water alarm –Deep water alarm –Anchor watch –True wind shift alarm –True wind speed too hi –True wind speed too lo –Off course alarm –Internal error (code) –Any other alarm (code) IS20 Instrument system

IS20 has no power button, and will be running as long as power is connected. The IS20 includes a power save function. When power save is activated, the display will be turned off. IS20 Instrument system

IS20 Analog 3 arrows at the top of the LCD indicates which function that is displayed. The arrow symbols are identified by legends printed on the scale. The IS20 Analog instruments may show several functions, displayed by using the Up and Down keys. The illustration shows legends used on the IS20 Rudder/Compass instruments to indicate active function. IS20 Instrument system

IS20 Wind/Tack Apparent wind speed True wind speed VMG to wind Wind direction Parameter Scale/pointer Apparent wind angle True wind angle Apparent wind angle True wind angle IS20 Instrument system

IS20 Technical Specifications Power consumption:1,3 W Display:Backlit LCD matrix display Resolution:130 x 104 pixels Illumination (Red or white): Adjustable in 10 steps Environmental protection: FrontIP56 Back:IP43 Transducers: ”Smart” transducers from Airmar –(DST800 Triducer, DT800 Depth/Temp and ST800 Speed/Temp, analog) –DT800 comes with a 2m cable and Micro-connector and a 1m cable to link to ST800 (Temp not used) –Frequency 235 khz IS20 Instrument system

Software upgrade and Service Software upgrade is easily made from a Laptop through a SimNet connector A SimNet-USB Software Upgrade Kit is available; p/n Service in the field by replacing complete units IS20 Instrument system

IS20 Service/Trouble shooting Service information

IS20 Service/Trouble shooting SimNet status

IS20 Service/Trouble shooting System data

IS20 Service/Trouble shooting Resetting the instrument / system

IS20 Service/Trouble shooting

Inge Kvalbein Product Expert IS20 Instrument System Level 300

1.One of the instruments does not have a NMEA0183 input port. Which one? 1.Graphic 2.Wind 3.Combi 2.Which instrument has user configurable data pages? 1.Rudder 2.Graphic 3.Combi IS20 Instrument system “exam”

3.What kind of Masthead unit can also be used with IS20? 1.IS12 type 2.IS15 type 3.B&G type 4.Can IS20 have red illumination? 1.No 2.Yes 3.Only the analogue ones IS20 Instrument system “exam”

5.What kind of transducers are IS20 using? 1.Airmar IS12 transducers 2.Airmar IS15 transducers 3.Airmar ”Smart” transducers 6.What is a DST800? 1.Dual speed/temp transducer 2.Depth/speed/temp transducer 3.Distance log transducer IS20 Instrument system “exam”

7.Can IS20 Rudder be used as ”stand alone” rudder indicator? 1.Yes, NMEA0183 and SimNet 2.Yes, NMEA0183 only 3.No 8.Can IS20 be remotely controlled? 1.Yes, by an R3000X Remote 2.Yes, by a WR20 Wireless Remote 3.No IS20 Instrument system “exam”

9.What input data does IS20 need to calculate and display wind direction? 1.Apparent wind angle and true wind speed 2.Apparent wind angle and boat speed 3.Apparent wind angle, boat speed and heading 10.Can IS20 be used for SimNet diagnostics? 1.No 2.Yes 3.Yes, but only Graphic and Combi IS20 Instrument system “exam”