1. The Multi Series DL2-Multi
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

2. SKIPPER DL2-Multi SOG and STW 2 Axis Doppler Speed Log
9” Touch display.
JB70D2 Electronic unit
Convenient mounting
Plugable spring terminals (Wago)
DIN or screw wall mounting
NMEA over LAN (IEC )
NMEA normal
Web or Display setup
LAN, Pulse, Aux, Analog and NMEA interfaces
Main system software is now in the interconnection unit, 9” Display features in the display.
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

3. The DL2 Multi– JB70D2 interconnection unit
Totally new system consisting of:
2 x LAN (100MB)
4 x NMEA out
24VDC and VAC
Screw or DIN mounting
2 x NMEA in (for multi-repeater functions or quality control)
2x Aux out (pulse, fitness alarm, power failure alarm, Speed limits)
Auxiliary in (alarm reset)
Relay output (Function/power failure alarm/Speed limit)
Pluggable spring connectors
SD Disk for logging and software upgrade
2x USB
Tlf
Fax

4. The CU-M001 for DL2 New 9” Touch display
Universal display for all product and repeater (to follow).
Pluggable connector Power 24V, 2 NMEA inputs, 2 CAN, 1 NMEA port
LAN connector IEC LWE standard, and TCP/IP
Mounting for Panel, Desktop or Wall
On Screen and Web setup
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

5. The DL2SG-SA Sensor 100mm Standard Sensor
40m Orange cable 3 pair Power, TX,RX
4 Acoustic beams at 555kHz, temp sensor and future tilt sensor
Measures SOG from <2m to 150m*
Measures STW in first 3m under vessel
With depth output for each beam and average
Accuracy 2% , with 1% option (Code activated)
2 Design variants – Re-openable / Fully moulded
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

6. System Connection www.skipper.no SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

7. Auxiliary Connection www.skipper.no SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

8. System Connection POWER LAN Auxiliary and Alarm NMEA In and out SENSOR
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
SENSOR
Tlf
Fax

9. SENSOR www.skipper.no SKIPPER Electronics AS Enebakkveien 150
0680 Oslo
SENSOR
Tlf
Fax

10. Installation SETUP
The CU-M001 Graphic unit and JB70D2 talk using the LAN IEC standard
Both units are set up with ‘unique’ IP and IDs connected to serial number.
These can be changed, but must be ‘paired’
Alarm must also be paired, if needed
IO Should be set up as required
Default set up for Alarm and Pulse
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

11. www.skipper.no SKIPPER Electronics AS Enebakkveien 150 0680 Oslo
Tlf
Fax

12. Installation Control unit SETUP
Set the system type
Setup the IP address and ID as required
Setup the Group
Pair the units (Primary remote ID)
IT is / will be possible to pair up to other systems as well
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

13. Installation JB70D2 unit SETUP
Setup the IP address and ID as required
Setup the Group
If you change these you will loose connection and must return to display to reset
These changes can also be performed via web page, using the service software to relink
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

14. Installation Communications
Set Required outputs of the NMEA com ports and LAN- bridge communication
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

15. Installation Communications
Set Required Auxiliary inputs and outputs
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

16. Installation Vessel www.skipper.no SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

17. Alarms System has 3 alarms: Speed High (B) Speed Low (B)
System failure (C)
These are handled as
On Screen – No beeper so add beeper to relay if required
Hardware alarms – relay output, Aux output, Aux input (alarm reset/acknowledge)
NMEA ALR/ACK A message is sent on alarm, acknowledge and end of alarm state
NMEA ALF/ACN/ARC messages are sent and requests for changing status
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

18. Calibration 2 modes, 3rd to follow www.skipper.no
SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

19. User Screens and setup www.skipper.no SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax

20. User Screens setup www.skipper.no SKIPPER Electronics AS
Enebakkveien 150
0680 Oslo
Tlf
Fax