1. Anne Kelly & Company ™ Imagine ~ Dream ~ enjoy Step-by-Step Design Oversized Pomanders All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

2. Step 1 Locate two wire basket forms…hanging baskets for plants are perfect and are available in various sizes. All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

3. Step 2 Cut Styrofoam pieces to fit inside and fill the basket forms. Oasis or other foam can also be used. *estimate about one sheet of Styrofoam per form. * if using soaked oasis the form will be very heavy. All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

4. Step 3 All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009  Once filled, wire or tape the baskets together to secure. Locate pins and moss (or anyother material you choose) to cover the form.

5. Step 4 All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009  Begin placing and pinning moss into place where needed.

6. Step 5 Sheet moss works great here as it can be wrapped around the wire basket and very little pinning is required. Large leaves would also be a fun medium used to cover the wire form. *One box of sheet moss will cover approximately 2 large 18” or 3 medium 12” forms. All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

7. Step 6 To add pops of fresh, trim stem to fit inside a pointed end water tube. If using Oasis…simply push the floral stems directly into form. All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

8. Step 7 Push water tube into Styrofoam form. Sometimes it is easiest to place the water tube first, then add the fresh stem. All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

9. Step 8 Continue adding fresh until desired look and fullness is achieved. All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

10. 12” forms can easily hold anywhere from 15 to 20 stems of Gerberas, Roses or other floral, while larger 18” forms can hold 30 or more stems. All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

11. Oversized pomanders can be made in all sizes and utilized in many ways such as entrance or aisle décor… All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

12. …Then re-invented for reception décor! All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

13. …or used to create phenomenal focal points of an event space… All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

14. …hang a few from the ceiling as another layer of the overall theme! All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009

15. Good Stuff to Know ~ Time estimation of one completed pomander is anywhere from 30 minutes for fairly simple floral up to one hour for more detailed designs. Cost of base materials is about $30 with retail cost of floral ranging from $30 for 15 stems of Gerberas on up. Floral will last in water tubes for approximately 5 hours for flowers such as hydrangea to well over 5 hours for roses and gerberas, and all day for most Orchids All product, software & ideas included in this presentation Patent Pending; All rights reserved, copyright Anne Kelly & Company, LLC 2009