Presentation is loading. Please wait.

Presentation is loading. Please wait.

1 NS1000 V3.0 - Hospitality features- Rev1.1 31 July., 2013.

Similar presentations


Presentation on theme: "1 NS1000 V3.0 - Hospitality features- Rev1.1 31 July., 2013."— Presentation transcript:

1 1 NS1000 V3.0 - Hospitality features- Rev July., 2013

2 2 Table of Contents 1. Overview 2. Features 3. How to program

3 3 Chapter 1 Overview

4 4 1. Overview Use special hotel features for effective and productive management. Solution A variety of hotel functions are possible when combined with a Fedelio or other PMS system. Including check in/out, wake up calls, message waiting LED, room status, and call accounting. Wake-up Calls/ Remote Wake-up Calls Features and Benefits >> Available to set from 3 rd Party SIP phone Hotel guests can set various wake-up call message. Wake-up calls can also be set by an operator. External relay control External sensing devices, such as security alarms or smoke detectors, can be installed 2 phones can be allocated with same EXT No. at each room Any combination of phone devices can be allocated at each room under same EXT number. MW lamp supported on 3 rd Party SIP phone* Check-in/check-out room status monitor Property Management System (PMS) interface MW lamp on 3 rd Party SIP phone can be controlled. Can check Room Status at a glance. Check-in/Check-out Room Status Monitor * Features New for V3

5 5 Chapter 2 Features

6 Enhancement of 3 rd party SIP Device Function Overview NS1000 will support following function from V3.0 for 3 rd party SIP device 1)Message waiting indication There are 2 types of methods to deliver MWI to 3 rd party SIP devices. NS1000 will support both type of Message interface a) Unsolicited mode :MWI without SIP subscription b) Standard mode :MWI with SIP subscription (*1) 2) Timed Reminder (available for UT phone as well) Time reminder control operation and function is same as level as SLT. Following table shows 3 rd Party SIP device, available above function Note: *1 There is limitation. Max 64 SLT can be controlled by this mode Device TypeSIP Devices IP PhoneGrandstream (GXV3175) Yealink (VP2009) Teledec(ND2200) SoftphonePCCounter path (Bria, x-lite) AndroidCounter path (Bria, x-lite) Media5 (Media5-fone) IOSCounter path (Bria, x-lite) Media5 (Media5-fone)

7 Enhancement of 3 rd party SIP Device Enhanced Video Phone connection V3 will support P2P connection with H263(V2)/264(V3) video codec I/F VPN Branch NS1000 HQ SIP Carrier Note: Hold and transfer operation from/to Video Phone is now supported

8 8 Function Overview 2-2. Features on TDE/NCP V4.2, V5, V6 NS1000 now catch up TDE/NCP V5 and V6 functions from V3.0 Following functions will be available DECT Paging without PS setting Emergency Alert Duplicate numbering plan for Hotel function

9 9 Chapter 3 Function and programing

10 10 How to make Conference Call 3.1 DECT Paging 3. Function and Program 1. Conference group call can be answered automatically without automatic Setting for each extension. 2. PT user can start “talking” by dialing any key during broadcasting mode, as well as DECT user. Note: Conference group call has to be enabled or coordinator using class of service. Ability to Talk Enable: PT/DECT can stat to talk Disable: Can not start to talk Automatic Answer Enable: Automatic Answer Mode Disable: No automatic Answer -> ->

11 Emergency Alert Function and Program Emergency alert is displayed on PC installed in office, when emergency number is dialed from guest room. This feature is for SMDR based application such as Panasonic CA Call Accounting (free of charge). Note 1. Alert is displayed twice. 2. Duration is output as zero second after dialing. 3. Version up is NOT required for CA Call Accounting 4. Up to 10 Emergency Dial can set up 5. System Option must be enabled

12 Emergency Alert Function and Program Enter Emergency Dial up to 30 digits -> -> -> 1. System setting for Emergency Notification timing Select Emergency Notification either Stat and End Call or End call -> -> 2. Emergency Dial data

13 Duplicate Numbering plan for Hotel - 3. Function and Program 13 Duplicated extension numbering for hotel is now available by NS1000 Room 1101 (Ext 1101) Room 1102 (Ext 1102).. Room 1111 (Ext 1111) Room 1001 (Ext 1001) Room 1002 (Ext 1002).. Room 1011 (Ext 1011) Room 901 (Ext 901) Room 902 (Ext 902).. Room 911 (Ext 911).. Room 201 (Ext 201) Room 202 (Ext 202).. Room 211 (Ext 211) Room 101 (Ext 101) Room 102 (Ext 102).. Room 111 (Ext 111) On Right hand case, Extension # and Room Number can be matched. In this case following operation is available Dial 2 + Time Out or dial # to call extension 2 for room service. Dial 201 to call extension 201. Dial Time Out or dial # to call Ext 101 (Room 101 ) Dial 1011 to call Ext 1011 (Room 1011) Note: This function is controlled by Reserved Bit (Default is Disable)

14 Duplicate Numbering plan for Hotel Function and Program Activate Duplicate Extension Numbering Reserved Bit 0E-2 must be on to enable this function -> -> ->

15 Duplicate Numbering plan for Hotel Function and Program Room 1101 (Ext 1101) Room 1102 (Ext 1102).. Room 1111 (Ext 1111) Room 1001 (Ext 1001) Room 1002 (Ext 1002).. Room 1011 (Ext 1011) Room 901 (Ext 901) Room 902 (Ext 902).. Room 911 (Ext 911).. Room 201 (Ext 201) Room 202 (Ext 202).. Room 211 (Ext 211) Room 101 (Ext 101) Room 102 (Ext 102).. Room 111 (Ext 111) Programing Hint To realize sample Extension number configuration and One digits service, following program setting must be done 1,1xx,10xx,11xx can be assigned as Extension number

16 16 END

17 17 Modification NS1000 V3.0 Hospitality features_Rev1.0_30Jun2013.pptx - 1 st release NS1000 V3.0 Hospitality features_Rev1.1_31Jun2013.pptx - Add Video Phone operation P7


Download ppt "1 NS1000 V3.0 - Hospitality features- Rev1.1 31 July., 2013."

Similar presentations


Ads by Google