We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byLiam Boothe
Modified over 2 years ago
GEARLESS PRESS SOLUTIONS
Printing width: 40” – 63”/ 78”* Print Repeat: 15.8” – 39.3” Max. Printing Speed: 1500 FPM/2000 FPM* Frame thickness: 4.7” C.I. Drum Diameter: 77” Anilox Diameter: 6.8”/7.2”* 8-Color XG (High-Speed) 8-Color XG-LR (Large Repeat ) Printing width: 40” - 63” / 78”* Print Repeat: 17.7” – 47.2” Max. Printing Speed: 1500 FPM/2000 FPM* Frame thickness: 4.7” C.I. Drum Diameter: 94.4” Anilox Diameter: 6.8”/7.2”* Printing width: 40” – 63”/ 78”* Print Repeat: 15.8” – 39.3” Max. Printing Speed: 1500 FPM/2000 FPM* Frame thickness: 4.7” C.I. Drum Diameter: 94.4” Anilox Diameter: 6.8”/7.2”* 10-Color XG (High-Speed) * Available Optional Features
XG 10-COLOR PRESS
C.I. DRUM SERVO DRIVE Direct drive of the C.I. Drum by a special High Torque servo motor
Printing speeds up to 2000 FPM Printing speeds up to 2000 FPM HEAVY-DUTY PRINT DECK DESIGN
XG DECK SUPPORT SYSTEM Dual Bearing Supports with Dual Linear Rails with Recirculating Bearings Most Robust Mandrel Support in the Industry!
COLOR DECK SUPPORT SYSTEM Dual Linear Rails with Recirculating Bearings Pre-Loaded Ball Screws
DIRECT SERVO DRIVE – GEARLESS Direct drive of the C.I. drum, plate and anilox mandrels by AC servo motors controlled by digital drives 360° adjustment of longitudinal register
SERVO DRIVE – XG Tight Mechanical Tolerance with Direct Drive Mandrel
IMPROVED XG STEPPER ACCESS
XG-LR 8-COLOR PRESS
Print deck open for sleeve change Print deck closed for printing Plate Sleeve Removal Anilox Sleeve Removal
OPTIONAL SLEEVE EJECTORS Plate Sleeve Ejector Anilox Sleeve Ejector
Something Special. Flexographic presses for flexible packaging and folding carton, and solventless laminators Platen die cutters and creasers for paper.
PRE-PRINT TECHNOLOGY LTD. Pre-Print Technology Linerflex.
Presenza dei Catari sul Garda Maria Cristina Piras Festa della Fioritura 30 Aprile 2011 Salò.
Flexo Graphic Printing Machine Manufacturer & Exporters.
Plate Mounting Minimise press downtime Latest developments in mounting.
Electric Actuator LEFB Belt Drive AC Servo Slider type.
Morin Flexo Printing Technologies Philip Morin 61 East Main Street Forestville, CT Tel/Fax:
Purpose Main purpose of the PBL tooling is to provide hot air that is used for making PBL tubes To make PBL tubes some changes and additions in Body maker.
Fast, Accurate and Reliable Robotic Storage System Single or Multiple Gantry
Linear Mechanical Systems Sizing & Estimating Life of a Positioning System.
ATR ITALIA GRINDING MACHINES. TECHNOLOGICAL LINES Grinding with conventional abrasives [Al 2 O 3 ] Grinding with superabrasives [CBN]
Technical presentation ECF50-90 Why ECF? Create a top of the line electric FLT Improve efficiency Reduce maintenance What is retained? –Cab –Lifting.
Power Screws. Ball Screws Problem A stepper motor rotating at 120 rpm is directly coupled to a power screw with a pitch of 1 mm. 1.How fast can the.
Structural Design Considerations Small or 0° turn radius Given size restriction and ground clearance Friction Type of drive-train Weight and center of.
Portable CNC Cutting Machine PNC-12 EXTREME Contents in this PowerPoint may change without notice. Contact Koike Europe B.V. for contents verification.
Bridge Modules BKK and BKR. © All rights reserved by Bosch Rexroth AG, including for intellectual property right applications. All powers of disposal,
MARS 2 Design Review-Optomechanical Review 07 Nov 2002 GLW1 MARS 2 Mechanical Design Review.
SMARTLINE. WHY 4X1 ? Less space requirement Fast make ready time Less power consumption.
Rolling is a process of reduction of the cross- sectional area or shaping a metal piece through the deformation caused by a pair of metal rolls rotating.
Copyright © 2007 Rockwell Automation, Inc. All rights reserved. HPK-Series High Power Asynchronous Servo Motors Delete grey box and replace with image,
BRUKS 1006 Chipper Chipper Unit Weight 8500 kg.
Copyright 2001 ACS-Tech80 1 ACSPL+ Training Class SPiiPlus Feedback Tuning.
Blown Film Unit 300 It is suitable for production of small films used by the food industry and in the packaging field where the application of big production.
James Richmond09/09/20101 CLIC Permanent Magnet Quadrupole - Proposed Mechanism Prepared by James Richmond Presented by Norbert Collomb STFC Daresbury.
TCV2000A High Performance Traveling Column Vertical Machining Center.
How to support a shaft? The motor just turns the shaft. It doesn’t provide any support.
EdgeMax Less Space but Maximum Productivity Rugged unitized steel table/frame Full capture bearing assemblies Low mass aluminum beam driven by dual brushless.
1 Tree service 1 The Tree Service Solution Epsilon’s superior engineering delivers the most effective combination of power, performance, speed, and quality.
MICRO-BIT TECHNOLOGY, INC. MP200 Presentation. Micro-Bit MP200 Presentation Overview l Operator Interface l Discrete I/Os l Analog I/Os l Motion controller.
AHTD Symposium - Direct Drive Motors April 4-5, 2006 Tom England The Differentiators.
Midterm Review Part II Midterm Review Part II 40.
Purpose Body Making module is designed for bending the laminated foil film in the shape of a tube, for welding the side seam and for cutting bodies with.
Electric Motor. Motor Selection Criteria ➢ Motor type: DC, AC, single-phase, three-phase and so on ➢ Power rating and speed ➢ Operating.
SERVO MOTORS Tech Topic By Ryan Bidlack. Background A servo motor is composed of a DC, AC, or an AC induction motor and a feedback control. A servo motor.
KOHLER Continuous Two-drum Surface Winder. Features: Winds on 3 inch (75mm) or larger cores New Core Accelerator Advanced Cut Knife System cuts within.
Senior Design: Tachometer Calibration Device Team 4: Jennifer Egolf, Matthew Hagon, Michael Lee, Christopher Pawson Sponsor: DuPont Advisor: Dr. Glancey.
INTRODUCTION TO ROBOTICS Part 3: Propulsion System Robotics and Automation Copyright © Texas Education Agency, All rights reserved. 1.
Merlin EPU Support and Drive System Design Review Steve Marks Mark Coleman 4/26/06.
Circles – Circumference and Area Circumference – the distance around a circle.
1 AUTOMOTIVE BRAKING SYSTEMS AUTOMOTIVE BRAKING SYSTEMS.
Maestosa Milkline Rotary Proactive and Operator. Maestosa Overview The most advanced technology – Milkline Miking technology – R&R Rotary technology –
Updated: 10/28/2008 Gearless AC PM Synchronous Machines DAVE MOLNAR President GARY WARD Vice President Sales BILL KUHAR Engineering Manager DENNIS RHODES.
Automation Simplified conveyor system It is a system of mechanical handling equipment that moves materials from one location to.
DIT Equipment Inc. Sharky Splitter. High productivity 90 metric ton of force (100 short ton) on a 48” wide split. Split in 2 seconds (including an 8”
SM 900 PRESSURE SENSITIVE MACHINE. MACHINE FEATURES Wiping Station Labelling station Feed screw.
Perry Lapper Progress. Frame With Actuators Outside Frame.
Sherline CNC machines. CNC mill with 4-axis driver box Systems are also available without a computer. The axis driver box plugs into the parallel.
FLUID POWER CONTROL ME604C. FLUID POWER Sources of Hydraulic Power ◦ Construction and working of pumps ◦ Actuators: Linear hydraulic actuators ◦ Fluid.
Clinometers for Structural Engineering CEE 398 Ping Gu University of Illinois Ping Gu University of Illinois.
TIGERBOT MECHANICAL DESIGN Kyle Backer (EE), Jeremy Jensen (ME), Matthew DeCapua (EE), Eric Walkama (ME), Mike Thomas (EE), Jonathan Cormier (CE), John.
© 2017 SlidePlayer.com Inc. All rights reserved.