Presentation is loading. Please wait.

Presentation is loading. Please wait.

SQ40i (Individual Sequin Device) Check List SQ40i (individual Sequin Device) Sunstar Precision Co.,Ltd.

Similar presentations


Presentation on theme: "SQ40i (Individual Sequin Device) Check List SQ40i (individual Sequin Device) Sunstar Precision Co.,Ltd."— Presentation transcript:

1 SQ40i (Individual Sequin Device) Check List SQ40i (individual Sequin Device) Sunstar Precision Co.,Ltd.

2 SQ40i (Check Sheet) SQ40i (individual Sequin Device) YES NO If you finish all Checks, click the right button to go back to install page. SQ40i (Check Sheet) Confirmation of parts Check Point Installation Trouble-Shooting Characters Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 1.Write down SQ40i Model No. and S/N. Model No. : S/N : Install date : Technicain : Note : Sunstar Precision Co.,Ltd.

3 SQ40i (Check Sheet) SQ40i (individual Sequin Device) YES NO Confirmation of parts Check Point Installation Trouble-Shooting Characters Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 1.Are quantity and quality of SQ40i OK? L-Type : EA, R-Type : EA 2. Are quantity of the boards for SQ40i prepared properly? SQ B/D : EA, Control B/D : EA If you finish all Checks, click the right button to go back to install page Sunstar Precision Co.,Ltd.

4 SQ40i (Check Sheet) SQ40i (individual Sequin Device) YES NO If you finish all Checks, click the right button to check next check point Sunstar Precision Co.,Ltd. 3. Do you prepare all cables for SQ40i? Sub control board SQ board connect SQ board power cable Control board SQ board can communication cable Encoder branch cable Can communication branch cable SQ board Air pressure Sol. power cable Air pressure Error detection cable SQ device connecting cable Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Confirmation of parts Check Point Installation Trouble-Shooting Characters

5 SQ40i (Check Sheet) SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. Confirmation of parts Check Point Installation Trouble-Shooting Characters Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4. Do you prepare the parts of air pressure for SQ40i? Nipple(KQ2T06-04) and Nipple for branch (KQ2t06-00) Black and invisible tubes Air pressure Sol. Filter regulator and air pressure Sol. connecting hose 5. Do you prepare tools and jigs for installation?

6 SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 1.Did you use water hose and level gauge when adjusting level? Confirmation of parts Check Point Installation Trouble-Shooting Characters SQ40i Installation (Moving picture)

7 SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. 2. Do you confirm important check point of SQ40i(Assy)? Do you check state of bolt screwing and scratch and chopping? Is there no jamming of wheel bracket working? Is there no jamming of driving lever pin working? Is the cutting of spangles good? Do you check lock-tight on the SQ base supply guide plate screws(M3 X L6) Is there no jamming on lifting slide moving? Is there no jamming when you screw ball screw by hands? Is the state of motor cable connecting good? Confirmation of parts Check Point Installation Trouble-Shooting Characters Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · SQ40i Installation (Moving picture) If you finish all Checks, click the right button to go back to install page.

8 SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. 3. Did you attach jumper pin(Ended resistor) on the control board and SQ board of the last head? Is a jumper(ended resistor) pin attached only on SQ board of the last head? Are the control board and SQ board proper with specification of machine? Confirmation of parts Check Point Installation Trouble-Shooting Characters Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · SQ40i Installation (Moving picture)

9 SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. 4. Is cables of control B/D and SQ B/D connected properly? Is there no missing cables? Is there no bad/wrong connection? Confirmation of parts Check Point Installation Trouble-Shooting Characters Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · SQ40i Installation (Moving picture)

10 SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. 5. Did you check in all check list of air pressure progress? Did you check nipple assembling and plug inserting to nipple of the first and last heads? Is the air pressure hose connected to nipple completely? Did you check air pressure of Sol. and filter regulator with no missing? Confirmation of parts Check Point Installation Trouble-Shooting Characters Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · SQ40i Installation (Moving picture)

11 SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. 6. Did you check in all the check list of attaching device and lifting damage absorbing? Is the needlebars and needles of SQ40i proper specification? Did you check level and close of SQ supply base and setting Jig? Did you check close of front, side, under of Jig and SQ supply base? Did you check damage absorbing of Lifting? Confirmation of parts Check Point Installation Trouble-Shooting Characters Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · SQ40i Installation (Moving picture)

12 SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. 7. Did you check in all check list of motor synchronization and quantity of SQ supping? Did you check lamp(ON) of potentiometer? Did you check close with Jig? Is there no interval between supply lever and motor driving lever? Did you check if SQ(spangle) cut is on the center? Is there no jamming when Move Motor test? Did you check returning to origin when origin function? Confirmation of parts Check Point Installation Trouble-Shooting Characters Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · SQ40i Installation (Moving picture)

13 SQ40i (individual Sequin Device) 8-1. Did you check all check list of SQ40i? Was the guide attached as proper size? Does it matched SQ supply leverB1 and standard pin hole of SQ base? Is there no interval between SQ supply leverB1,B2 and motor driving lever roller? Is there no jamming when front, rear SQ supply and output, do front, rear SQ output in a line(straightly)? When you pull spangles, are the spangles pulled? Does the cut point of front, rear sequin correct? Are there no jamming points when ball screw spins and lifting works? YES NO If you finish all checks, click the right button to check mechanic check point Sunstar Precision Co.,Ltd. Confirmation of parts Check Point Installation Trouble-Shooting Characters SQ40i Installation (Moving picture) Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

14 SQ40i (individual Sequin Device) Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8-2. Did you check all check list of SQ40i? Do you have SQ Setting Jigs, use correctly when installation? Did you set device on the state of air suppied? Did you check close of SQ suppy base with Jig, and level? Did you keep distance 0.5mm ball screw between stopper screw? Is there no contacting at needle and SQ cutting mes when needle down? Is there no missing parts? YES NO Sunstar Precision Co.,Ltd. Confirmation of parts Check Point Installation Trouble-Shooting Characters SQ40i Installation (Moving picture) If you finish all checks, click the right button to check electronic check point.

15 SQ40i (individual Sequin Device) Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. 1.Did you check all check list of SQ40i? Are the control B/D and SQ B/D proper to install specification? Do you check attaching end resistor(jumper pin) and no other end resistors are on the board except the last head? Confirmation of parts Check Point Installation Trouble-Shooting Characters SQ40i Installation (Moving picture)

16 SQ40i (individual Sequin Device) Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9. Did you check in all check list of supply guide replacing process? Did you check setting state of replaced guide? Is there no jamming on supply lever working? YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. Confirmation of parts Check Point Installation Trouble-Shooting Characters SQ40i Installation (Moving picture)

17 SQ40i (individual Sequin Device) SQ40i Setting · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. Confirmation of parts Check Point Installation Trouble-Shooting Characters SQ40i Installation (Moving picture) 8. Was SQ40i set properly to machine specification? L-Type R-Type Both-Type Extension What size(mm) of spangles? L : Front mm, Rear mm / L : Front mm, Rear mm Does the OP.Box setting correct?

18 SQ40i (individual Sequin Device) YES NO Sunstar Precision Co.,Ltd. If you finish all Checks, click the right button to go back to install page. Trouble - Shooting · · · · · · · · · · · · · · ·· · · · · · · · · · · · · · · · · · · · · · · · · · · · · 1.Is there any strange symptom? (When there is strange symptom, write down about the symptom in detail.) Confirmation of parts Check Point Installation Trouble-Shooting Characters SQ40i Installation (Moving picture)


Download ppt "SQ40i (Individual Sequin Device) Check List SQ40i (individual Sequin Device) Sunstar Precision Co.,Ltd."

Similar presentations


Ads by Google