1. KX-TES/M824 System New Analog Small PBX
Panasonic Communications Co., Ltd.
Network Business Company
Edition 2.3
Confidential 1

2. Edition Edition 1.0 01.Oct.2004 for TES/M824 Ver.1
Edition Jan for TES/M824 Ver.2
Edition Jan the condition to revive CO from CO Busy Out is added.
Edition Mar modification for small mistakes
Edition Apr modification for font problem in Feature Comparison chart.

3. General 0: Enhancement History 1: System Outline
2: System Connection Diagram
3: System Components
4: System Resources
5: System Block Configuration
6: General Specifications
7: New Feature
8: Feature Comparison
9: New Proprietary Telephone

4. 0: Enhancement History (1/2)
KEY Features Enhancement
Version 1.0
Built-In Voice Message (BV)
Fixed Line SMS Terminal Support
Caller ID Display on SLT
3-level Automated Attendant (AA)
PC-Programming & Maintenance
Automatic Configuration for Outside (CO) Line Type
Version 2.0
CO Busy Out
Budget Management
Call Charge Management

5. 0: Enhancement History (2/2)
Version Control
Ver.1
Ver.2
Y881AA041206
Y881AG050201
Y881AI050221
Y881AK050411
Y881AL050425
Y881AM050531
Y881AN050704
Y881AP050712
Y911AA051206
V1.0.17
V1.0.38
V1.0.41
V1.0.48
V1.0.50
V1.0.52
V1.0.53
V1.0.54
V2.0.2 A B C D E F G H J
2004/12
2005/02
2005/04
2005/06
2005/07
2005/12
V1.001R5
V1.003R2
V1.003R3
V2.000
ROM Version
Version
Suffix
Release
PCMC
* PCMC: PC Maintenance Console i.e. PC Programming Software

6. 1: System Outline (1/3) ALL in One Package 1) Pre-install
(a) DISA with OGM
(OGM of a system is 1ch operation
and is 180 seconds.)
(b) Internal Caller ID (FSK/DTMF 3ch)
(c) Remote Modem (V4.2bis 2400bps)
2) Optional
(a) Additional DISA Card
(DISA of a system is 2ch operation and is a maximum of 360 seconds.)
(b) Voice Message (60min * 2ch)
(c) 4-Port Door phone / 4-Port Door Opener Card
(d) Caller ID Card for CO

7. 1: System Outline (2/3) Easy Installation Hybrid extension (Not all)
2) Configuration
3CO x 8Hybrid ( TES824 SYSTEM)
-> 8CO + 16Hybrid + 8 SLT (Max)
6CO x 16Hybrid ( TEM824 SYSTEM)
3) Centralized Feature Setting for T7710 (PBX mode)

8. 1: System Outline (3/3) Easy Maintenance PC Programming (USB/RS232C)
(PT Programming is also available. )
2) Firmware upgrade by PC (USB/RS232C)
3) Pre-installed Remote Modem (V.42bis:2400BPS)

9. 2: System Connection Diagram
PSTN
Remote Maintenance PC
CO Trunk
New Small PBX KX-TES/TEM824
Door Opener/Door
Door Phone
Battery
T7720/ T7730/ T7750/ T7740
USB1.1 or
RS-232
T7735
PC Programming
T7710
Voice Mail System
BGM/Music on Hold
Internal Caller ID
SLT
Amplifier
Paging/Speaker
RS-232
SMDR
FAX
Printer

10. 3: System Components Backup Battery Cable KX-A227 Door phone KX-T30865
Proprietary Equipment
3-Port Analog CO Caller ID Card
KX-TE82493
2-Channel Voice Massage Card
KX-TE82492
Message Expansion Card for OGM
KX-TE82491
3-Port Analog CO & 8-Port Extension(Hybrid) Card
KX-TE82483
2-Port Analog CO & 8-Port Extension(SLT) Card
KX-TE82480
8-Port Extension(SLT) Card
KX-TE82474
2-Port Door phone / 2-Port Door Opener Card
KX-TE82460
Optional Service Cards
6 to 8 Analog CO & 16 to 24 Extensions Main Unit
(Basic capacity: 6 Analog CO & 16 Extensions)
KX-TEM824
3 to 8 Analog CO & 8 to 24 Extensions Main Unit
(Basic capacity: 3 Analog CO & 8 Extensions)
KX-TES824
Main Unit
Description
Model
4-Port Door phone / 4-Port Door Opener Card
KX-TE82461
Ver.2

11. 4: System Resources (1/2)
Ver.2
TE82491
Ver.2
TE82491

12. 4: System Resources (2/2)

13. 5: System Block Configuration(1/4)
KX-TES824
(Preinstall)
(Option)
Capacity
TRUNK : 3CO (RJ11)
EXTENTION : 8HYBRID (RJ11)
4 DOORPHONE
4 DOOR OPENER card
Voice Message card
　 (60min) 2ch
DISA OGM : 180sec (1ch)
DISA OGM 180sec
RMT Modem : 1ch (V.42bis:2400bps)
3CO8EXT(Hybrid)card
INTERNAL Caller-ID (FSK/DTMF): 3ch
2CO8EXT(SLT)card
USB(1.1)I/F : 1ch
RS-232C : 1ch (D-SUB)
8EXT(SLT) card
Battery back-up
(Need optional cable)
Caller ID card(3CO) x3
VOICE MAIL INTEGRATION
(APT/DTMF)

14. 5: System Block Configuration(2/4)
KX-TE82483
KX-TE82480
KX-TE82474
Expanded
CO: 3
CO: 2
CO: 0
System
Ext: 8
Ext: 8 (SLT)
Ext: 8(SLT)
KX-TES824 CO - 3
EXT
8(SLT)
16(8PT+8SLT) 2 5
8 (SLT)
16 (8PT+8SLT) 6 8
16 (16PT)
24 (16PT+8SLT)

15. 5: System Block Configuration(3/4)
KX-TEM824
(Preinstall)
(Option)
Capacity
TRUNK : 6CO (RJ11)
EXTENTION : 16HYBRID (RJ11)
4 DOORPHONE
4 DOOR OPENER card
Voice Message card
　 (60min) 2ch
DISA OGM : 180sec (1ch)
DISA OGM 180sec
RMT Modem : 1ch (V.42bis:2400bps)
INTERNAL Caller-ID (FSK/DTMF): 3ch
2CO8EXT(SLT)card
USB(1.1)I/F : 1ch
RS-232C : 1ch (D-SUB)
8EXT(SLT) card
Battery back-up
(Need optional cable)
Caller ID card(3CO) x 3
VOICE MAIL INTEGRATION
(APT/DTMF)

16. 5: System Block Configuration(4/4)
KX-TE82483
KX-TE82480
KX-TE82474
Expanded
CO: 3
CO: 2
CO: 0
System
Ext: 8
Ext: 8 (SLT)
KX-TEM824 CO - 6
CO: 6
EXT
8 (SLT)
24 (16PT+8SLT)
Ext: 16 2 8

17. 6: General Specifications(1/2)
ITEM
Specifications
CPU
16bit V MHz
Control ROM
8Mbit(Flash-ROM)
Control RAM
4Mbit(SRAM)
Power Sauce
AC ,50/60Hz
Dimensions
284*368*95mm
Weight
2.5Kg
Intercom Paths 4
Dialing Mode
Internal : Tone/Pulse
SMDR
Detail Recording : DATE, Time, Extension Number
CO Line Number, Dialed Number
Account Code, Caller ID
Voice mail integration
APT/DTMF
DTMF receiver
2 / 8 Extensions

18. 6: General Specifications(2/2)
ITEM
Specifications
Internal Call ID
FSK/DTMF 3ch
DISA OGM
180sec X 1ch (360sec x 2ch by KX-TE82491Message Expansion Card)
FAX detection
Yes
Remote Modem
(Basic:2400bps) X 1ch
Direct connect to External Battery
Yes (With KX-A227 Backup Battery Cable)
Basic Capacity
TES824 TRUNK: 3CO Extensions: 8 Hybrid
TEM824 TRUNK: 6CO Extensions: 16 Hybrid
Maximum Capacity
TRUNK : 8CO
Extensions: 16 Hybrid + 8 SLT
Connections
CO Line: RJ11, EXT Line: RJ11,
Paging : Conductor Jack X 1,
External Music : Conductor Jack X 1,
SMDR/PC Programming : RS-232C(9pin D-SUB) X 1 & USB1.1 X 1

19. 7: New Feature (1/18) 1) Built-in Voice Message (BV)
2) Fixed Line SMS Terminal Support
3) Caller ID Display on SLT
4) 3-level Automated Attendant (AA)
5) PC Programming & Maintenance
a) On-site On-Line System Administration by PC (USB/RS232C)
b) Remote On-Line System Administration by PC
c) On-Site Off-Line Firmware upgrade by PC (USB/RS232C)
6) Automatic Configuration for Outside (CO) Line Type
7) CO Busy Out
8) Budget Management
9) Call Charge Calculation
Ver.1
CO Busy Out => FG
Budget Management => FG 1.8.3
Call Charge Calculation => FG
Ver.2

20. 7: New Feature (2/18)
1-1) Built-in Voice Message (BV) (for System / For each extension)
We have 2 kinds of Voice Message.
1) Common Voice Message
- Used for DIL 1:1 Destination to BV, IRNA Destination to BV.
- Only Operator can access Common Voice Message.
If there is no operator, only manager can access this Voice Message.
2) Personal Voice Message
- Used for Call Forward to BV for each extension, Direct message recording
from Ext. to BV.
- Each extension user can access personal voice message.

21. 7:New Feature (3/18)
1-2) Built-in Voice Message (BV) (for System / For each extension)
Default Setting
ManagerがPrivate Mailboxのメッセージを聞くための手順の説明が必要。
=>Managerは、ジェネラルと個人の両方のメッセージを録音された順にごちゃ混ぜに聞くしかない！
(Max Record 60min) or
(Max 125 Common/Personal OGM’s
and Common/Personal Voice Messages)
(Max Record 60min) or
(Max 125 Personal OGM’s
and Personal Voice Messages)

22. 7:New Feature (4/18)
1-3) Built-in Voice Message (BV) (for System / For each extension)
Common OGM
Recording : Off-Hook -> Feature Number # -> Confirmation tone.
Playing : Off-Hook -> Feature Number # -> Confirmation tone.
Removing : Off-Hook -> Feature Number # -> Confirmation tone.
Personal OGM
Recording : Off-Hook -> Feature Number 7231# -> Confirmation tone.
Playing : Off-Hook -> Feature Number 7232# -> Confirmation tone.
Removing : Off-Hook -> Feature Number 7230# -> Confirmation tone.

23. 7:New Feature (5/18)
1-4) Built-in Voice Message (BV) (for System / For each extension)
Forwarding Your Calls to Built-in Voice Message

24. 7:New Feature (6/18)
2-1) Fixed Line SMS Terminal Support (Short Message Service)
SLT Extension which supports SMS feature
PSTN 3) 1) 2)
Short Message Center
CID=
SMS Routing feature Sequence
When Someone sends Short message to SLT extension in KX-TE, Short Message Service Center(SMS center) receives the message.
SMS Center makes a call to KX-TE line. At this time, CO sends CID of SMS center to KX-TE.
KX-TE detects the CO incoming call with CID. If CID is same as pre-assigned SMS Center, KX-TE route the incoming call to pre-assigned SLT extension which supports SMS feature.

25. 7:New Feature (7/18)
2-2) Call Routing for Fixed Line SMS (Short Message Service)
Programming Ex.
CO1 => Ext101,102
CO2 => Ext103,104

26. 7:New Feature (8/18) 3) Caller ID Display on SLT PSTN 098-765-4321
Ext101
PSTN
Ext102
Ext103
内線鳴動
８つ同時に鳴動し、３相で制御。
つまり同じカードに繋がっている電話は同時になり、3枚の内線カードが3相で順に鳴動する。

27. 7:New Feature (9/18) 4-1) 3-level Automated Attendant (AA) 2 5
Outside Caller
wants to talk
with Mark,
ABC Company,
Engineering
Group,
Software Team.
Ext102
ABC Company.
Engineering Group
Software Team
Ext.102
Mark
AA Level 1
1stOGM:Company Greeting
This is ABC Company. Operator Dial0,
Sales dial1, Engineering dial2,---.
Dial of Outside Caller 2
AA Level 2
2nd OGM: Engineering Group
This is Engineering Group.
Software Dial0,Hardware dial1,
Mechanical dial2,---.
180s x 1ch, 360s x 2ch
AA Level 3
3rd OGM: Software Team
This is Software Team. Mike dial0,
John dial1, Bob dial2,---,
Mark dial5,---. 5

28. 7:New Feature (10/18) 4-2) 3-level Automated Attendant (AA)
Programming Ex. 1 2 3
録音の仕方は、UMの2.1.7を参照しましょう。

29. 7:New Feature (11/18) 5-1) PC Programming & Maintenance
a) On-site On-Line System Administration by PC (USB/RS232C)
USB
RS232C 永山
18. Caller ID to SLT(Analogue Extension)
21. Caller ID to SLT for Public Call through Private Network

30. 7:New Feature (12/18) 5-2) PC Programming & Maintenance
b) Remote On-Line System Administration by PC 永山
18. Caller ID to SLT(Analogue Extension)
21. Caller ID to SLT for Public Call through Private Network

31. 7:New Feature (13/18) 5-3) PC Programming & Maintenance
c) On-Site Off-Line Firmware upgrade by PC (USB/RS232C) 1 2 3 永山
18. Caller ID to SLT(Analogue Extension)
21. Caller ID to SLT for Public Call through Private Network

32. 7:New Feature (14/18)
6) Automatic Configuration for Outside (CO) Line Type
After System clear, TE824 Main unit activates CO dial type detection.
Please Connect CO line First.
DTMF
Pulse
Central Office
DTMF
Pulse
TE starts to detect CO line type(DTMF/Pulse) automatically on the first power up after system clear.
You don’t need to select DTMF or Pulse in system programming [401]Dial Mode, but you have to set “C.BLK” if the CO line is Call Blocking type. So please connect CO lines to Main unit first, then execute system clear. 永山
18. Caller ID to SLT(Analogue Extension)
21. Caller ID to SLT for Public Call through Private Network

33. 7:New Feature (15/18) 7) CO Busy Out
Ver.2
The PBX can monitor the loop current sent through outside (CO) lines.
Ver The PBX can not monitor
When dialing Loop CO access number,
an user may seize a CO port which is not connected CO line
Ver The PBX can monitor
An user does not need to seize a CO port which is not connected CO line
<logic>
PBX checks loop current pre-programmed time --- [115]
“No detection of loop current”  BUSY of CO port status
<feature activating>
[154] Disable(default) / Enable
<activating CO port from CO Busy Out situation>
In following cases, Busy-out CO port goes to normal condition.
When PBX find loop current in periodically checking.
When [154] is Disabled
When this CO port receive an incoming call
When an user seize this CO port by CO button

34. 7:New Feature (16/18) 8) Budget Management
Ver.2
Outside (CO) line call can be limited by total call charge for each extension.
[925]“Budget Management” (Enable/Disable) --- Extension base
[926]“Budget Limit Selection” (Enable/Disable)
When current outside (CO) line call exceeded the limit,…
Enable (Disconnect the call after the beeps)
After beep warning, PBX disconnects this call.
Then he can not make more outside (CO) line call.
Disable (from the next call)
The user can continue this call.
But he can not make more outside (CO) line call.
* Emergency Call can override this restriction.  [309]“Emergency Number”

35. 7:New Feature (17/18) 9-1) Call Charge Calculation
Ver.2
The PBX can calculate call charge for outside (CO) line calls to preprogrammed destinations.
* See detail in Feature Guide “ Call Charge Calculation”.
This calculation is used for…
Call Charge Display on PT LCD during conversation
Budget Management
Call Charge Management by manager extension

36. 7:New Feature (18/18) 9-2) Call Charge Calculation
The core part of calculation
a) call duration < Flat duration 
Call Charge = Flat Charge
Call Charge = Flat Charge + Unit charge x X
b) call duration >= Flat duration 
X = Whole number part of
Call Duration – Flat Duration
Unit Duration *

37. 8: Feature Comparison(1/13)
TES/
TEM824
TA308/
TA616
1. System Expansion
Expansion Module/Card
Yes
2. System Administration
Data and Time Setting
Operator/Manager Extension
Time(Day/Night/Lunch)Service
On-site System Administration PITS
On-Line System Administration PITS
On-site Off-Line Software Install by PC No
On-site On-Line System Administration PC
Remote On-Line System Administration PC
Analog CO Line Auto-Configuration

38. 8: Feature Comparison(2 /13)
TES/
TEM824
TA308/
TA616
3. System Feature
Account Code Entry
Yes
Door Opener
Doorbell/Door Chime
DSS Console
Extension Group
Paralleled Telephone Connection
Proprietary Telephone Setting Data Default Set
Station Message Detail Recording（SMDR）
System Data Default Set
Voice Mail Integration
Walking COS

39. 8: Feature Comparison(3 /13)
TES/
TEM824
TA308/
TA616
3. System Feature　(Cont.)
Flexible Numbering Extension
Yes
Short Message Service for Cordless Single Line Telephone(SMS) No
4. Fault Recovery/Diagnostic
Power Failure Transfer
5. Attended Feature
Direct In Lines(DIL)
Direct Inward System Access(DISA)
Uniform Call Distribution(UCD)
DISA Call Only
UCD with Message
3 Level Auto Attendant DISA

40. 8: Feature Comparison(4 /13)
TES/
TEM824
TA308/
TA616
6. Origination Feature
Alternate Calling - Ring/ Voice
Yes
(Voice->Tone)
Automatic Callback Busy
Automatic Outside(CO)Line Access Number
ARS/LCR
Busy Station Signaling(BSS)
Do Not Disturb (DND) Override
Emergency Call
Executive Busy Override - Extension
Executive Busy Override - Outside (CO) Line
Executive Busy Override Deny
Host PBX Access

41. 8: Feature Comparison(5 /13)
TES/
TEM824
TA308/
TA616
6. Origination Feature　(Cont.)
Intercom Calling
Yes
Operator Call
Outside Calling
Idle Line Preference
Prime Line Preference - Outgoing
No Line Preference - Outgoing
Station Feature Clear
Electronic Station Lockout
Electronic Station Lockout - Cancel All
Remote Station Lock Control
Toll Restriction

42. 8: Feature Comparison(6 /13)
TES/
TEM824
TA308/
TA616
6. Origination Feature　(Cont.)
Toll Restriction Override
Yes
Toll Restriction Override-System Speed Dialing
Toll Restriction Override-Personal Speed Dialing
Toll Restriction System Speed Dialing Boundary Class
Toll Restriction Station Lock Boundary Class
7. Dialing Feature
One-Touch Dialing
Pickup Dialing
Pulse to Tone Conversion
Automatic Pause Insertion
Automatic Redial

43. 8: Feature Comparison(7 /13)
TES/
TEM824
TA308/
TA616
7. Dialing Feature　(Cont.)
Last Number Redial
Yes
Saved Number Redial
Secret Dialing
System Speed Dialing
Personal Speed Dialing
8. Ringing Feature
Call Waiting
Do Not Disturb (DND)
Log-In/Log-Out
Station Hunting - Circular
Station Hunting - Terminate

44. 8: Feature Comparison(8 /13)
TES/
TEM824
TA308/
TA616
8. Ringing Feature　(Cont.)
Timed Reminder
Yes
Timed Reminder, Remote (Wake-Up Call)
9. Answering Feature
Directed Call Pickup
Group Call Pickup
Call Pickup Deny
Call Retrieving from a TAM
Hands free Answerback
No Line Preference - Incoming
Prime Line Preference - Incoming
Ringing Line Preference

45. 8: Feature Comparison(9 /13)
TES/
TEM824
TA308/
TA616
9. Answering Feature　(Cont.)
Outgoing Message(OGM)
Yes
10. Holding Feature
Call Park
Call Splitting
Consultation Hold
Call Hold - Trunk
Call Hold - Intercom
Exclusive Hold - Trunk
Exclusive Hold - Intercom
Automatic Hold by CO/DSS Button
Call Hold Retrieve - Station

46. 8: Feature Comparison(10 /13)
TES/
TEM824
TA308/
TA616
10. Holding Feature(Cont.)
Call Hold Retrieve - Trunk
Yes
Music on Hold
11. Transferring Feature
Call Forwarding - All Calls
Call Forwarding - Busy/No Answer
Call Forwarding - To Trunk
Call Forwarding - Follow Me
Screened Call Transfer - to Extension
Unscreened Call Transfer - to Extension
Call Transfer - to Outside(CO) Line
Unscreened Call Transfer to Outside(CO) Line

47. 8: Feature Comparison(11 /13)
TES/
TEM824
TA308/
TA616
11. Transferring Feature　(Cont.)
Intercept Routing
DISA Call Only
12. Conversation Feature
Calling Party Control(CPC) Signal Detection
Yes
Conference
Unattended Conference
Data Line Security
Door phone Call
External Feature Access
Flash
Hands free Operation
Limited Call Duration

48. 8:Feature Comparison(12 /13)
TES/
TEM824
TA308/
TA616
12. Conversation Feature　(Cont.)
Room Monitor
Yes
13. Audible Tone Feature
Distinctive Dial Tones
Outside (CO) Line Ringing Selection
Ringing Pattern Selection
14. Paging Feature
Paging Through PT Built-in Speaker - All Calls
Paging Through PT Built-in Speaker - Group
Paging External
BGM Through External Pager

49. 8: Feature Comparison(13 /13)
TES/
TEM824
TA308/
TA616
15. Proprietary Telephone Feature
Handset / Headset Selection
Yes
Microphone Mute
Background Music（BGM）
Volume Control - Speaker
Volume Control - Handset Receiver
Volume Control - Headset Receiver
Volume Control - Ringer
Volume Control - LCD Contrast

50. 9: New Proprietary Telephone
KX-T7735
12 CO Buttons
12 Feature Buttons
3 Line Backlit LCD
Backlight for LCD
Speakerphone
Headset Jack
Note: This model work with TES/M and TDA system.

51. Thank you very much ! Thank you very much ! TDA30のみで実現した下記の項目どうする?
1 Fax Automatic Routing by MSG Card (This is not applied for TDA100.)
2 Built in TAM (Pending) (This is not applied for TDA100.)