Software Radio Solutions BAE Systems and Pentek

Software Radio Solutions BAE Systems and Pentek

Software Radio System Blocks
BAE Systems tuners and receivers complement Pentek software radio products. BAE tuners offer both analog IF and digital IF products directly compatible with Pentek A/D converters and digital receivers. WORK STATION RECEIVE ANTENNA DIGITAL BAE SYSTEMS ANALOG RF TUNER or RECEIVER PENTEK DIGITAL RECEIVER PENTEK A/D CONVERTER PENTEK DSP PENTEK D/A CONV ANALOG AUDIO DISK / TAPE WORK STATION NETWORK • SWITCH • BUS • EMBEDDED CONTROLLER • WIRELESS BASESTATION ROUTER TRANSMIT ANTENNA ANALOG RF UP CONVERTER PENTEK A/D CONV PENTEK DSP PENTEK DIGITAL UP CONVERTER PENTEK D/A CONVERTER AUDIO DISK / TAPE

Analog IF Product Compatibility
BAE tuners and receivers with analog IF outputs are shown on the left, while Pentek software radio products with compatible analog inputs are shown on the right. BAE Analog Out Receivers & Tuners Pentek Analog Input Products WJ VHF/UHF Miniceptor 6402 Dual Chan 250 kHz 16-bit A/D WJ-8607 VHF/UHF Miniceptor 6410 Dual Chan 10 MHz 16-bit A/D WJ VHF/UHF Miniceptor 6420 Dual Chan 20 MHz 14- or 16-bit A/D WJ-8611 Digital HF/VHF/UHF Receiver 6441 Dual Chan 41 MHz 12-bit A/D WJ-8621 VHF/UHF VXIceptor 6465 Dual Chan 65 MHz 12-bit A/D WJ-8633 VHF/UHF Receiver 6472 Dual Chan 70 MHz 10-bit A/D WJ VXI HF/VHF/UHF Receiver 6210 Dual Chan NB Receiver & A/D - VIM-2 SI VHF/UHF Nanoceptor 6211 Dual Chan 65 MHz 12-bit A/D - VIM-2 WJ-8654 HF/VHF/UHF Microceptor 6216 Dual Chan WB Receiver & A/D - VIM-2 WJ-8655 Miniature VHF/UHF Receiver Chan NB Receiver, A/D, & FPGA - VIM-4 SI Direct HF Tuner Chan NB Receiver, A/D, & FPGA - VIM-2 WJ-9119 HF Tuner 6235 Dual Chan WB Receiver, A/D & FPGA - VIM-2 WJ-9117 Dual VME Tuner Chan Receiver, A/D, & FPGA - PMC WJ-9127 Dual HF Tuner SI-9136 Dual VME Tuner SI-9137 Dual VME Tuner

Analog IF Tuner + ‘C40 DSP Analog IF outputs from BAE Systems tuners can be digitized by Pentek 64xx series dual channel A/D converters which drive 8, 16, or 32 channel narrow band digital receivers with C40 comm port outputs suitable for C40 processor boards. BAE SYSTEMS Tuners and Receivers 6U VMEbus SI Direct HF SI-9117 Dual VHF/UHF SI-9136 Dual VHF/UHF SI-9137 Dual VHF/UHF C-size VXIbus WJ-8621 VHF/UHF VXIceptor WJ-8633 VHF/UHF Receiver WJ HF/VHF/UHF SI-9119 HF Tuner SI-9127 Dual HF Tuner Chassis WJ-8604 VHF/UHF Miniceptor WJ-8607 VHF/UHF Miniceptor WJ-8609 VHF/UHF Miniceptor WJ Digital HF/VHF/UHF SI VHF/UHF Nanoceptor WJ-8654 HF/VHF/UHF µceptor WJ-8655 Mini VHF/UHF PENTEK 2 Channel A/D’s 6U VMEbus kHz 16-bit MHz 16-bit MHz 14-bit MHz 16-bit MHz 12-bit MHz 12-bit MHz 10-bit PENTEK Digital Receivers 6U VMEbus Ch DDR Ch DDR Ch DDR Ch DDR Ch DDR Ch DDR Differential ECL Analog IF FPDP C40 Comm Port C40 Comm Port PENTEK C40 Processors 6U VMEbus 4284 Single C40 4269 Dual C40 4270 Quad C40 4285 Octal C40

Analog IF Tuner + C6000 / PowerPC
The Model 6223 C40 Comm Port Adapter VIM-2 mezzanine module allows the same A/D and digital receivers on the previous slide to be attached to the C6000 and G4 PowerPC processor boards. BAE SYSTEMS Tuners and Receivers 6U VMEbus SI Direct HF SI-9117 Dual VHF/UHF SI-9136 Dual VHF/UHF SI-9137 Dual VHF/UHF C-size VXIbus WJ-8621 VHF/UHF VXIceptor WJ-8633 VHF/UHF Receiver WJ HF/VHF/UHF SI-9119 HF Tuner SI-9127 Dual HF Tuner Chassis WJ-8604 VHF/UHF Miniceptor WJ-8607 VHF/UHF Miniceptor WJ-8609 VHF/UHF Miniceptor WJ Digital HF/VHF/UHF SI VHF/UHF Nanoceptor WJ-8654 HF/VHF/UHF µceptor WJ-8655 Mini VHF/UHF PENTEK 2 Channel A/D’s 6U VMEbus kHz 16-bit MHz 16-bit MHz 14-bit MHz 16-bit MHz 12-bit MHz 12-bit MHz 10-bit PENTEK Digital Receivers 6U VMEbus Ch DDR Ch DDR Ch DDR Ch DDR Ch DDR Ch DDR Differential ECL Analog IF FPDP PENTEK VIM Processors 6U VMEbus 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC PENTEK VIM-2 Module 6223 Comm Port I/F VIM

Analog IF Tuner + C6000 / PowerPC
The same A/D converters can use their FPDP outputs to connect through the Model 6226 or 6250 FPDP Adapters for delivering A/D data to the C6000 and G4 PowerPC processor boards. The 6250 features two Xilinx Virtex-II FPGA’s. BAE SYSTEMS Tuners and Receivers 6U VMEbus SI Direct HF SI-9117 Dual VHF/UHF SI-9136 Dual VHF/UHF SI-9137 Dual VHF/UHF C-size VXIbus WJ-8621 VHF/UHF VXIceptor WJ-8633 VHF/UHF Receiver WJ HF/VHF/UHF SI-9119 HF Tuner SI-9127 Dual HF Tuner Chassis WJ-8604 VHF/UHF Miniceptor WJ-8607 VHF/UHF Miniceptor WJ-8609 VHF/UHF Miniceptor WJ Digital HF/VHF/UHF SI VHF/UHF Nanoceptor WJ-8654 HF/VHF/UHF µceptor WJ-8655 Mini VHF/UHF PENTEK 2 Channel A/D’s 6U VMEbus kHz 16-bit MHz 16-bit MHz 14-bit MHz 16-bit MHz 12-bit MHz 12-bit MHz 10-bit FPDP Analog IF FPDP PENTEK VIM Processors 6U VMEbus 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC PENTEK FPDP VIM-2 Modules 6226 Dual FPDP 6250 Dual FPDP + FPGA VIM

Analog IF Tuner Classification System
By adding the Model 6099A Digital Delay Memory to the previous slide, signals can be classified by the DSP using the undelayed data. The delay path allows time for signal classification so that only signals of interest need to be stored. BAE SYSTEMS Tuners and Receivers 6U VMEbus SI Direct HF SI-9117 Dual VHF/UHF SI-9136 Dual VHF/UHF SI-9137 Dual VHF/UHF C-size VXIbus WJ-8621 VHF/UHF VXIceptor WJ-8633 VHF/UHF Receiver WJ HF/VHF/UHF SI-9119 HF Tuner SI-9127 Dual HF Tuner Chassis WJ-8604 VHF/UHF Miniceptor WJ-8607 VHF/UHF Miniceptor WJ-8609 VHF/UHF Miniceptor WJ Digital HF/VHF/UHF SI VHF/UHF Nanoceptor WJ-8654 HF/VHF/UHF µceptor WJ-8655 Mini VHF/UHF PENTEK 2 Channel A/D’s 6U VMEbus kHz 16-bit MHz 16-bit MHz 14-bit MHz 16-bit MHz 12-bit MHz 12-bit PENTEK Delay Memory 6U VMEbus 6099A 512 MBytes Analog IF FPDP FPDP Undelayed FPDP Delayed FPDP PENTEK VIM Processors 6U VMEbus 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC PENTEK FPDP VIM Modules 6226 Dual FPDP 6250 Dual FPDP + FPGA VIM

Analog IF Tuner Tracking Receiver
The same system can substitute the Model Channel Receiver VIM-4. Energy detection on the wideband undelayed signals uses the DDR bypass path. Delayed signals can then be de-hopped by pre-tuning the receiver channels. BAE SYSTEMS Tuners and Receivers 6U VMEbus SI Direct HF SI-9117 Dual VHF/UHF SI-9136 Dual VHF/UHF SI-9137 Dual VHF/UHF C-size VXIbus WJ-8621 VHF/UHF VXIceptor WJ-8633 VHF/UHF Receiver WJ HF/VHF/UHF SI-9119 HF Tuner SI-9127 Dual HF Tuner Chassis WJ-8604 VHF/UHF Miniceptor WJ-8607 VHF/UHF Miniceptor WJ-8609 VHF/UHF Miniceptor WJ Digital HF/VHF/UHF SI VHF/UHF Nanoceptor WJ-8654 HF/VHF/UHF µceptor WJ-8655 Mini VHF/UHF PENTEK 2 Channel A/D’s 6U VMEbus kHz 16-bit MHz 16-bit MHz 14-bit MHz 16-bit MHz 12-bit MHz 12-bit PENTEK Delay Memory 6U VMEbus 6099A 512 MBytes Analog IF FPDP FPDP Undelayed FPDP Delayed FPDP PENTEK VIM Processors 6U VMEbus 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC PENTEK DDR VIM Module CH DDR (DDR bypass path) VIM

Analog IF Tuner + VIM Pentek’s VIM mezzanines offer both A/D and DDR functions in a single module for direct connection to C6000 and PowerPC processor boards. These “channelized” single-slot, 6U sub-systems contain the entire signal processing chain. BAE SYSTEMS Tuners and Receivers 6U VMEbus SI Direct HF SI-9117 Dual VHF/UHF SI-9136 Dual VHF/UHF SI-9137 Dual VHF/UHF C-size VXIbus WJ-8621 VHF/UHF VXIceptor WJ-8633 VHF/UHF Receiver WJ HF/VHF/UHF SI-9119 HF Tuner SI-9127 Dual HF Tuner Chassis WJ-8604 VHF/UHF Miniceptor WJ-8607 VHF/UHF Miniceptor WJ-8609 VHF/UHF Miniceptor WJ Digital HF/VHF/UHF SI VHF/UHF Nanoceptor WJ-8654 HF/VHF/UHF µceptor WJ-8655 Mini VHF/UHF PENTEK A/D and Receiver VIM Mezzanines Ch 65 MHz A/D Ch A/D + 2 Ch DDR Ch A/D + 2 Ch DDR Ch A/D + 32 Ch DDR Ch A/D + 16 Ch DDR Ch A/D + 2 Ch DDR PENTEK VIM Processors 6U VMEbus 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC Analog IF VIM

Analog IF Tuner + PMC For systems requiring less processing power, the Model Channel Digital Receiver and A/D PMC module can be attached to general purpose PMC processor platforms for VME, CompactPCI and PCI. BAE SYSTEMS Tuners and Receivers 6U VMEbus SI Direct HF SI-9117 Dual VHF/UHF SI-9136 Dual VHF/UHF SI-9137 Dual VHF/UHF C-size VXIbus WJ-8621 VHF/UHF VXIceptor WJ-8633 VHF/UHF Receiver WJ HF/VHF/UHF SI-9119 HF Tuner SI-9127 Dual HF Tuner Chassis WJ-8604 VHF/UHF Miniceptor WJ-8607 VHF/UHF Miniceptor WJ-8609 VHF/UHF Miniceptor WJ Digital HF/VHF/UHF SI VHF/UHF Nanoceptor WJ-8654 HF/VHF/UHF µceptor WJ-8655 Mini VHF/UHF General Purpose Processor Platforms 6U / 3U VMEbus 6U / 3U CompactPCI Desktop PCI PENTEK A/D and Receiver PMC Mezzanines Ch A/D + 16 Ch DDR Analog IF PMC

Digital IF Product Compatibility
BAE tuners and receivers containing an A/D converter with differential ECL digital IF outputs are shown on the left. Pentek software radio products with compatible differential ECL digital inputs are shown on the right. BAE Digital Out Tuners & Receivers Pentek Digital Input Products WJ-9104 Multichannel Digital Tuner Chan - 2 Input - Comm Port Out WJ-9107 Wideband Telecom Chan - 2 Input- Comm Port Out Chan - 2 Input - RACEway Out Chan - 4 Input- Comm Port Out Channel Narrowband - MIX Chan Narrowband \ 1 Chan Wideband - MIX 6099A 512 MB Memory Delay Buffer

Digital IF Tuner + C40 Three Pentek digital receivers with 8, 16, and 32 channels of DDR accept the differential ECL outputs from BAE tuners. Receiver outputs are connected to C40 processor boards using front panel C40 comm ports. BAE SYSTEMS Tuners and Receivers C-size VXIbus WJ-9107 Wideband Telecom Tuner Chassis WJ-9104 Multichannel Digital Tuner PENTEK Digital Receivers 6U VMEbus Ch DDR Ch DDR Ch DDR PENTEK C40 Processors 6U VMEbus 4284 Single C40 4269 Dual C40 4270 Quad C40 4285 Octal C40 Differential ECL Digital C40 Comm Ports

Digital IF Tuner + C6x or PowerPC
The same receivers can be connected to C6000 or PowerPC processors by using the Model 6223 C40 Comm Port Adapter VIM-2 mezzanine module. BAE SYSTEMS Tuners and Receivers C-size VXIbus WJ-9107 Wideband Telecom Tuner Chassis WJ-9104 Multichannel Digital Tuner PENTEK Digital Receivers 6U VMEbus Ch DDR Ch DDR Ch DDR Differential ECL Digital C40 Comm Ports PENTEK VIM Processors 6U VMEbus 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC PENTEK VIM-2 Module 6223 Comm Port I/F VIM

Digital IF Tuner + RACEway
The Model 6526 RACEway receiver accepts two differential ECL inputs from BAE tuners and delivers 16 narrow band receiver channels over RACEway to RACEway-compatible processor boards for C40, C6000, or PowerPC. BAE SYSTEMS Tuners and Receivers C-size VXIbus WJ-9107 Wideband Telecom Tuner Chassis WJ-9104 Multichannel Digital Tuner PENTEK RACEway DSP 6U VMEbus 4285 Octal C40 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC Differential ECL Digital PENTEK Digital Receivers 6U VMEbus Ch DDR RACEway

Digital IF Tuner Classification System
Using the Model 6099A as a ECL-to-FPDP translator, this system achieves the same signal classification system described earlier. BAE SYSTEMS Tuners and Receivers C-size VXIbus WJ-9107 Wideband Telecom Tuner Chassis WJ-9104 Multichannel Digital Tuner Differential ECL Digital PENTEK ECL to FPDP I/F 6U VMEbus MBytes PENTEK Delay Memory 6U VMEbus 6099A 512 MBytes FPDP FPDP Undelayed FPDP Delayed FPDP PENTEK VIM Processors 6U VMEbus 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC PENTEK FPDP VIM Modules 6226 Dual FPDP 6250 Dual FPDP + FPGA VIM

Digital IF Tuner Tracking Receiver
Substitute the Model Channel Digital Receiver VIM-4 module for energy detection on the wideband undelayed signals using the DDR bypass path. Delayed signals can then be de-hopped by pre-tuning the receiver channels. BAE SYSTEMS Tuners and Receivers C-size VXIbus WJ-9107 Wideband Telecom Tuner Chassis WJ-9104 Multichannel Digital Tuner Differential ECL Digital PENTEK ECL to FPDP I/F 6U VMEbus MBytes PENTEK Delay Memory 6U VMEbus 6099A 512 MBytes FPDP FPDP Undelayed FPDP Delayed FPDP PENTEK VIM Processors 6U VMEbus 4290 Quad C6201 4291 Quad C6701 4292 Quad C6203 4293 Octal C6203 4294 Quad G4 PPC PENTEK DDR VIM Module CH DDR (DDR bypass path) VIM

Quad A/D, 32-Chan Receiver & DSP
This channelized receiver sub-system using the Model 6230 VIM-4 Receiver and Model 4294 Quad G4 PowerPC contains 4 A/D converters, 32 narrow band digital receivers, two FPGAs, four PowerPC’s and a RACE++ interface in one VME slot! PENTEK 6230 VIM-4 32 Chan Receiver Xilinx Virtex-E FPGA 80 MHz 14-bit A/D Quad Recvr VIM VMEbus PENTEK 4294 Quad PowerPC MPC7400 PowerPC BAE SYSTEMS ANALOG RF TUNER or RECEIVER RACE++ Interface 267 MB/sec

RACEway Direction Finding System
Multiple receivers tuned to a single source can send time-stamped RACEway packets across the RACE++ fabric to DSPs employing the DF algorithms. The system is highly scalable for numbers of channels and DSP processors. FPGA A/D Recvr RACE++ I/F PPC DDR Sub-Systems RACE++ ILKP PowerPC or DSP Boards RACE++ I/F PPC BAE Tuner Analog IF FPGA A/D Recvr RACE++ I/F PPC BAE Tuner Analog IF RACE++ I/F PPC

Analog IF Tracking Receiver System
Wideband A/D data (red) flows directly to the PowerPC for FFT energy detection. Digital receivers are pre-tuned (green) so that when the delayed A/D data arrives, signals can be dehopped and delivered for demodulation (blue). PENTEK 6232 VIM 32 Chan Receiver Xilinx Virtex-E FPGA Quad DDR VIM PENTEK 4294 Quad PowerPC MPC7400 PowerPC FPDP CLOCK GEN 41 MHz 12-bit A/D EXT CLK CH 1 IN PENTEK 6441 12-bit 41 kHz 2 Chan A/D CH 2 IN Dual Channel Analog IF Tuner BAE Systems FPDP RACE++ Interface 267 MB/sec PENTEK 6099A 512 MB Delay 256 MB BUFFER FPDP

Digital IF Tracking Receiver System
This tracking receivers uses the 6250 FPGAs to compute real time FFTs for energy detection and tuning of the receivers in the 6232 so that delayed signals can be de-hopped. RACE++ joins the three processors for signal routing. PENTEK 6250 FPDP + FPGA Virtex-II 3 M Gate FPGA VIM PENTEK 4294 Quad PowerPC MPC7400 PowerPC RACE++ Interface PENTEK 4294 Quad PowerPC MPC7400 PowerPC RACE++ Interface BAE Systems 32 MB Pentek 6099A Memory Buffer FPDP WJ-9104 WJ-9107 Tuner ECL RACE++ ILKP Crossbar WJ-9104 WJ-9107 Tuner ECL PENTEK 6232 32 Chan Recvr GC4016 VIM PENTEK 4294 Quad PowerPC MPC7400 PowerPC RACE++ Interface 256 MB Pentek 6099A Memory Buffer FPDP

For More Information…. Pentek BAE Systems Gaithersburg www.pentek.com
One Park Way, Upper Saddle River, NJ Tel: BAE Systems Gaithersburg 700 Quince Orchard Rd, Gaithersburg, MD Tel:

Software Radio Solutions BAE Systems and Pentek

Similar presentations

Presentation on theme: "Software Radio Solutions BAE Systems and Pentek"— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

Software Radio Solutions BAE Systems and Pentek

Similar presentations

Presentation on theme: "Software Radio Solutions BAE Systems and Pentek"— Presentation transcript:

Similar presentations

About project

Feedback