Everything about drywall (lather)

Slides:



Advertisements
Similar presentations
Installation Presentation
Advertisements

One-Point Perspective…
Hoop House Construction. Parts of the hoop house Frame Hoops Braces Plastic cover.
Interior Wall and Ceiling Finish
Lather Lathers assemble and install the framework for gypsum materials in buildings. These materials include drywall and plaster.
Measuring and Layout Tools
Lather Skill Trades Introduction Lathers  Assemble and install the framework for gypsum materials (Drywall & Plaster) in buildings.
TWO (2) Installation principles 1. Cabinets need to be installed straight, plumb, and level. 2. The area you are working in is rarely straight, plumb,
Tools English for Careers Class. tool belt A tool belt is used to hold tools on your body.
Electrical Wiring Circuit Board Project. STEP 1 - Identify all Parts of the Project Saw Drill Driver w/ bits Drill w/bits (not pictured) #2 Phillips Screwdriver.
Method to fix wall tiles. Preparation All wall tiles to be immersed in water for 3-4 hours for better results. Some gap in between the rows to allow the.
ICRA Panel System Installation Instructions
Unit 61 Interior Trim Wood Molding • Composite Molding • Trimming Door Openings • Trimming Window Openings • Installing Base Molding • Installing Ceiling.
Lone Star Region National Model Railroad Association “The Shack” Scratch Build -Mike Jobe.
Ledgewood Farm greenhouse construction How do I Start? to I’m Finished!
Tektrim Installation Installing the UMB.
Components Connection Jig Graph Paper (#4101) Mounting Blocks (#5902) Nails Tape Measure Pen Hammer Customer Coordinates.
Key Terms, and Concepts Mr. Paules.  Sole Plates – Lowest horizontal strip on wall and partition framing.  Walls are laid out on two plates  Top and.
Fence Construction. What is the Purpose of a Fence? Protection from enemies To keep livestock in or protect from predators To protect a garden from animals.
Drywall Installation.
SANUS SYSTEMS THE UNION OF FORM AND FUNCTION Sanus Systems 2221 Hwy 36 West. St. Paul, MN
House Construction. Learning Standard 5. Construction Technologies Construction technology involves building structures in order to contain, shelter,
Residential Construction Unit 6 Interior finishes Mr. Todzia.
TOOL: Radial Arm Saw NEXT STEP: Radial Arm Saw RESULTS: Finish Top Apron Pieces at 9” L x 4” W x ¾ “ Th PROJECT Square Plant Stand PART Top Apron # NEEDED.
Safety is Job #1 Gypsum/Drywall originally called?
Scenic Materials. Scene Shop  This area has space and equipment to convert the designer’s plan into the complete scenery with the least effort, by the.
How to build raised garden beds for small space gardening How to build a raised garden bed, which tools, material and skills needed. How much does it cost.
Installation Presentation
Dry lining.
Laying Out Studs for a Wall
Construction Framing Mr. Brock. Lumber 2x4s are not actually 2” by 4”
Copyright © Glencoe/McGraw-Hill Carpentry & Building Construction Applying Vinyl Siding.
Residential Construction Window Installation Guide *Source: (1) Carpentry & Building Construction Feirer & Feirer (2) Sill to Sash; A Professionals Guide.
Garden Sheds. Agenda Overview – Next level – good example to teach construction skills – Includes layout skills – transferable to other projects – Orientation.
By: Caleb VanderWal.  Mix cement  Dig hole at least 24” into the ground  Poor cement in ground with poles  Wait 2-3 days (if you don’t wait that long.
Residential Construction Unit 4- Window and Doors Mr. Todzia.
Drywall Theory. Dry Wall Saw Dry wall T-Saw Dry Wall Lift.
Wall Framing Grimsby Secondary School Technology Dept.
Ag Construction Studs Vertical framing boards are called.
Wood Construction CTC-375.
Drawing & Drafting Tools. T-Square Why is the letter “T” in its name? Why is the word “square” in its name?
DRILL September 15, 2009 Name three drafting tools used in this class.
How to Build a Divider Wall By Charysse Roberson.
Gingerbread House Construction Instructions graham crackers 2.Knife 3.Cutting board 4.Hot glue gun 5.Base for house (paper plate)
Building Boxes What is the largest volume open top box that you can build from an 8 ½ by 11 inch sheet of paper?
House Construction.
Garden Box Design Plans. Garden Box Materials List QTY (Lumber)* 2”x4”x120”(10’) - Cut one of these boards into two 41” pieces and two 17” pieces.
Installing A Bathroom Shower Panel American Bath Enterprises, Inc. The Bath Tub & Shower Enclosure Innovators!
..  Drywall installers and finishers install and finish drywall sheets and various types of ceiling systems.
Potting Bench Plans Matt Howell Brooks County High School ___, Georgia Georgia Agricultural Education Curriculum Office, August, 2004.
Dry Wall Installation Copyright © Texas Education Agency, All rights reserved.
Lighten Up! Single Window Kits Add Light and Appeal To Home Bathrooms.
CARPENTRY By: Jason Burkhart. The installation of your floor system will depend on the design of your house. The guidelines we will use are 24ft wide.
Potting Bench Plans Matt Howell Brooks County High School Quitman, Georgia Quitman, Georgia Georgia Agricultural Education Curriculum Office, August, 2004.
Mezzanine Build Plans.
Installation Walkthrough Image Guide
Electrical Wiring Circuit Board Project
Interior Wall Coverings
February 27, 2007 Drill – ELEVATIONS
Lay two pieces of paper on top of each other. Fold paper “hotdog”.
Measuring Tools Cutting and Shaping Tools Striking Tools Drill Bits
Board Replacements for Nail-Down hardwood
DESIGNING & HANGING A PROFESSIONAL ART EXHIBITION
DESIGNING & HANGING A PROFESSIONAL ART EXHIBITION
How to Build a House.
Louisiana Tech University
Countertop Renovation
Popsicle House.
Wall and Ceiling Construction
Think About it….. Jot down everything you think you know about residential wall framing. Hint: think about what you already know about floor framing.
Presentation transcript:

Everything about drywall (lather)

materials Successful drywalling depends upon you having the appropriate tools, and there are tools designed specifically for drywall installation. However, most of the basic tools that you will need are not unique to drywalling. A tape measure, T-square, framing square, chalkline, and pencil will be needed no matter the size of the space and the height of the ceiling. You will also need drywall screws or nails, mixing tools, taping knives, and sanding tools. There’s also certain tools made for drywalling, there’s drywall saws, drywall hammers, drywall screw guns, taping knives and many different sanding tools.

Drywall basics When you start working with drywall, it helps to understand the basic structure of your wall. There should always be a bottom plate (2×4 or 2×6) that runs along the bottom of the wall, along with a top plate ( two 2×4’s or 2×6’s) that run along the top of the wall. If the house was built in the last 30 years or so it’s likely that the studs are spaced 16″ on center– from the center of one stud to the next. What all this stuff about wall structure means for drywall is that when you’re hanging wall board you’ll be able to hit wood almost anywhere within the top 2″ of wall, or the bottom 1″, but in the middle of the wall you’ll only find studs every 16″ or around windows, doors, and corners.

Drywalling tips The ceilings should go on first. Use a drywall jack so that you don’t hate your life when you’re doing this. Work from the top down. Stagger your vertical seams, so if you start with a full 8′ sheet on the top row, start with a 4″ sheet on the bottom row. Always begin and end on a stud. Use drywall screws (or nails, if you have something against your drill) and make sure they are long enough to penetrate at least 5/8″ into the stud. Screws should be used every 12″ on walls, and every 9″ on ceilings. Screw them in just tight enough to slightly indent the paper without tearing it. Wall board can be cut with a regular old utility knife and a straight edge

Schools that offer dry walling in nl Drywalling is offered in both of these schools: