We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byValerie Spong
Modified over 4 years ago
Tools English for Careers Class
tool belt A tool belt is used to hold tools on your body.
safety glasses Safety glasses are used to protect your eyes from injury.
claw hammer A claw hammer is used to pound in and pull out nails.
tape measure A tape measure is used to measure length or width.
chalk line A chalk line is used to mark long straight lines on flat surfaces.
carpenter’s pencil A carpenter’s pencil is used to mark measurements.
level A level is used to check that horizontal and vertical things are straight.
nail gun A nail gun is used to put nails into wood.
utility knife A utility knife is used to cut thin materials.
wrecking bar A wrecking bar is used to force apart two objects.
multi-tip screwdriver A multi-tip screwdriver is used to screw in and screw out different kinds of screws.
circular saw A circular saw is used to cut wood.
sledge hammer A sledge hammer is used to break dry wall or masonry.
adjustable wrench An adjustable wrench is used to tighten or loosen nuts or bolts.
cordless drill A cordless drill is used to drill holes in wood.
table saw A table saw is used to cut wood or other material.
nail set A nail set is used to fasten materials together.
plumb bob A plumb bob is used to be sure vertical things are straight.
C-clamp A C-clamp is used to hold wood or metal pieces in place.
miter box A miter box is used to guide a handsaw to make correct cuts.
Measuring and Layout Tools
Objective Define tools and materials used in agricultural engineering careers.
Fastening and Prying Tools
TWO (2) Installation principles 1. Cabinets need to be installed straight, plumb, and level. 2. The area you are working in is rarely straight, plumb,
Tools and Fasteners And, Their Uses.
TOOLS OF THE TRADE!. Measuring Tools Tape Measure- a retractable, flexible metal rule housed in a plastic or metal case; used for measuring in general.
Portable Power Tool Safety. Portable Electric and Cordless Drill Be sure the electric drill is disconnected from the power source before installing bits.
Tool Identification A guide to the identification of Hand Woodworking Tools.
Lesson A3–2: Using Hand Tools.
Electrical Wiring Circuit Board Project. STEP 1 - Identify all Parts of the Project Saw Drill Driver w/ bits Drill w/bits (not pictured) #2 Phillips Screwdriver.
Hand tools. Standard Head Screw Driver Used to tighten or loosen flat head screws.
Hand Tools GE 105.
Tools and Machines Stuarts Draft High School Technology Education Department.
TECHNICAL THEATRE I STAGECRAFT
Theatre Safety and Tools
Safe Use of Agricultural Mechanics Hand Tools
Tool Identification Tool Identification and Use as Photographed and Prepared by Doug Best.
Hey! Will You Hand Me That?
© 2020 SlidePlayer.com Inc. All rights reserved.