46 cm 1.8 cm cm 35.5cm 21.5cm 10 cm 4.5 cm 18.5 cm 32.5cm 26 cm

53 cm 35 cm 18 cm 16 cm 58 cm

50 cm 38 cm 19 cm 10 cm

Concern 1: (1) Fix the base framework to ensure that the camera enclosure is well attached to the base; (2) Add an “L” end in the base framework to keep the camera enclosure from sliding when Installed (3) Determine what is the optimal size for this base framework

Concern 2: the strength of the mobile part, both material and the connector with other part Concern 3: add the steal cable to the upper bar of the gondola system Concern 4: the upper bar must be removable to give access to the interior enclosure Concern 5: to eliminate the sharp edges Concern 6: to replace the bolts with a rugged type of weld (not a priority though)

Concern 7: because of item (4) we need to lengthen the main bar in a couple inches (the case does not need to be completely open to give access to the interior enclosure.) Concern 8: connector and power? Concern 9: material and strength Concern 10: waterproof ethernet connector

How many power we need, and where we can get, and through which way A diagram to show the basic set-up for the whole camera system in the tower: (1)Safety part (2)Reference for camera (3)Camera system Data download? Other sensor? Time schedule?