1. Reader Swap out Guide

2. INSTALLATION 2 3 1 4 Hang Reader Terminate Connections Wall Plate
The reader hooks onto the wall plate at the top and is secured at the bottom using one screw on each side 3
Terminate Connections
Green connector block with 5 coloured wires. 1
Wall Plate 4
Fit Cover
Cover is screwed in at the bottom using 2 x machine screws

3. How the Reader is fixed to the Wall Plate
Firstly remove the cover by taking out the screws at the bottom of the reader. Remove the green connector block and disconnect the wires from the block. Remove any ethernet cables. The reader is fixed to the wall bracket with 2 machine screws either side of the readers, remove these then push the reader upwards to take off the wall.