1 ladder to sector out2 bond fixture HFT PIXEL 11/16/2008 ladder to out2 bond fixture.SLDASM.

Slides:

Advertisements

Similar presentations

J.P. Langston Brake Retrofit

Advertisements

Learning objectives: -

Tools and Functions R7AxwS3BnU.

Fasteners Used to join together the various parts of the automobile.

RIGHT HAND CARTRIDGE UNIT AS CAN BE SEEN FROM THE PHOTOGRAPH,THE UNIT IS OFFERED UP TO THE END OF THE BED AND MARKED THROUGH AT LEAST THREE POINTS FOR.

HFT PXL Mechanical WBS 1.2 March 2010 Howard Wieman LBNL 1.

Lesson No 05 Week No. 05 Lesson Name Vice.

HFT PIXEL Mechanical Progress Strasbourg June-2009 Wieman 1.

Major Diameter: The largest diameter of the thread Minor Diameter: The smallest diameter of the thread Pitch: Distance between two threads (mm) or no of.

Specification section 3.3

1 Ladder assembly steps HFT PIXEL updated for ultimate chip ladders 2/12/2012 ladder fixture u.SLDASM.

Naming Convention HFT PIXEL 12-June pixel identification sector – ladder – chip - row - column 1-10in out1 out2 out Alternative.

2- Crankshaft, Piston Pin, and Piston Rod Bushing.

MACHINE TOOL Prof. kiran gore.

Out2 silk screen assembly H. Wieman revised Jan 30, 2009 for aluminum silkscreen frame with 5 mm dowel pins.

…………..Continued Recap Machine tool Lathe machine Basic components

Connecting crank and pivot shaft assemblies. Press fits, or interference fits are sometimes used in manufacturing to reduce manufacturing costs or liabilities.

Question of the Day Who invented the zipper and what year was it invented? ANSWER: Whitcomb L. Judson, 1893 Lecture 22 - AutoCAD.

HFT PXL Mechanical July 2010 Howard Wieman LBNL 1.

Resource 2 Manufacturing Techniques Machining Operations & Techniques.

Metal Working Tools.

APPENDIX A (RFI) FOR THE FABRICATION OF MULTIPLE STEEL REACTION STRUCTURES FOR NASA-MSFC STRUCTURAL TESTING Mike Roberts 12/2/09.

MR. PATTERSON CONSTRUCTION TECH 1

Naming Convention HFT PIXEL 12-June-2009 Updated 03/08/2013 By LG to include row and column information for Ultimate sensors.

DESIGN AND FABRICATION OF TURNING FIXTURE FOR ELBOW

J-FRM-0101 Revision with Reason No.DateInitials Drawing No. D’Vinyl Inc. Descriptive Part Name Designed byChecked by Engineer Drawing Type Foot Plate Date.

Vacuum chuck for probe station contacts: Howard Wieman work: cell: Eric Anderssen

Threads, Fasteners, and Springs Chapter Technical Drawing 13 th Edition Giesecke, Mitchell, Spencer, Hill Dygdon, Novak, Lockhart © 2009 Pearson.

Better pointing with HFT PIXELS a focus on the mechanics 15-Jan-2009 Wieman.

Ladder assembly steps HFT PIXEL 1/04/2009 ladder fixture.SLDASM.

“Building Quality to Customer Satisfaction!”. TOTAL QUALITY MACHINING, INC.

Traditional Fixtures & Fittings 1 J. Byrne Fixtures & Fittings J. Byrne

Fasteners and Welding Lecture 22 Autumn Quarter.

TMT.OPT.PRE REL011 SSA Tower Rework Instructions (for composite sleeve bearings) F. Kamphues.

Shown is the current construction Play between pin and holes in tube is causing the tictac sound. Current Part TicTac Noise (CF#64)

HFT PIXEL Mechanics HFT Review 25-Mar-2009 Wieman.

Geometric Dimensioning and Tolerancing Chapter 8, Tolerances of Location.

Counter Bore. Spot Facing – Provides a true bearing surface for a washer. Counter boring – Provides a recess for a bolt head, bushing or pin.

………..Continued - Parts of Radial Drilling Machine -Functions

Cold Metalworking Processes TSM 233 Unit 10. TSM 233 Metallurgy and Welding Processes Cold Metalworking Those metalworking processes where the base metals.

Prototype Review 04-Sept Different side-closeout to allow petal end-insertion concept…self- guided… Only backup from last review in July…

1 Manufacturing process-1 ( ) Lathe Operations Guided By:Prepared By: Prof. Stany R. Ghadiyali

ENM208 INTRODUCTION to MACHINING ANADOLU UNİVERSITY Industrial Engineering Department.

QXF Reaction / Impregnation Fixtures J. Schmalzle 4/9/13.

1 ladder to sector in bond fixture HFT PIXEL 2/18/2009.

ADVANCED MECHANICAL DRAFTING

Section 2 Safety, Tools and Equipment, Shop Practices Unit 6: Fasteners.

APLTCL004 - Fasteners Fasteners. APLTCL004 - Fasteners Bolts.

PRESENTATION ON LATHE MACHINE

1 LHC Hi-Lumi QXF Proposal for Coil Impregnation M. Anerella, J. Schmalzle, P. Kovach June 11, 2015.

Rigaku Rotary Assembly Top View shows “Inlet” side. This couples with 4-ea ¾“ bolts to “Offset” flange. This flange has central hole 1” offset from center.

Assembly of steering.

UNIT-II TURNING MACHINES

Internal and External Screw Threads

Limits and fits.

Manual Process Planning

Manual Process Planning

Different Types of Lathe Operations And Alignment Test

P T P P S S Use a Step Plane move as follows

Threads and Threading.

Development of Surfaces

Machining Processes.

KNOCK OUT DIAMOND KNOCK-OUT DIAMOND -REMOVAL.

PBC Method Flat Mirror Gas Mixture Dielectric Mirror Pump Window PM

A: d0=d2-d1 B:d0=d2/d1 C:d0=d2 D=d1+d2 A: d0=d2-d1.

Traditional Fixtures & Fittings

Manual Process Planning

Drill America Tool School

Valve stem “gag” mechanism

Presentation transcript:

1 ladder to sector out2 bond fixture HFT PIXEL 11/16/2008 ladder to out2 bond fixture.SLDASM

2 parts to build part filecurrent job future jobs materialpage sector chuck in base.SLDPRT1 MIC sector chuck in cap.SLDPRT1 MIC sector chuck out1 base.SLDPRT1 MIC sector chuck out1 cap.SLDPRT1 MIC sector chuck out2 base.SLDPRT1 MIC sector chuck out2 cap.SLDPRT1 MIC sector chuck out3 base.SLDPRT1 MIC sector chuck out3 cap.SLDPRT1 MIC ladder chuck.SLDPRT13 MIC z locator.SLDPRT1? MIC ladder chuck handle.SLDPRT26 3D print black 10 locating pin MMC 8472A11.SLDPRT13 modify MMC part 3,5 locating pin diamond MMC 8472A19.SLDPRT13 modify MMC part 3,5

3 sector chuck, important tolerances top surface flat to 1 mil curved edge to pins – 4 mil surface to pin 4 mil (z locator.SLDPRT)

4 a possible machining sequence machine all features except joining holes and listed critical features match drill pin location holes and joining bolt holes pin parts and grind top surface machine listed critical features critical features for last? locating pin holes and curved edge sector chuck out2 cap.SLDPRT sector chuck out2 base.SLDPRT

5 sector chuck parts locating pin MMC 8472A11.SLDPRT bullet nose liner MMC 31335A51, 1 of 3 bullet nose aligning pin MMC 31335A11, 1 of 2 bullet nose diamond aligning pin MMC 31335A311.5 in post hex MMC 91780A361, 1 of 4 sector chuck out2 base.SLDPRT sector chuck out2 cap.SLDPRT plunger pin 1lb MMC 3360A560, 1 of 2 locating pin diamond MMC 8472A19.SLDPRT ¼-20 x 1.5 in, 1 of 4 ¼-20 x 1 in, 1 of 2 z locator.SLDPRT note: locator pins listed as SLDPRTs are purchased parts that require modification we will send in order for all McMaster-Carr parts

6 sector chuck features 1/4 pipe tap for Push-to-Conn Tube Fitting 90 Deg Elbow for 3/8" Tube OD X 1/4" NPTF Male Pipe MMC 9087K239087K23 break external edges sector chuck out2 base.SLDPRT

7 sector chuck features ¼-20 x2 helicoil sector chuck out2 base.SLDPRT

8 sector chuck features fillets not important can be r=0 to 10 mm sector chuck out2 base.SLDPRT

9 ladder chuck, important tolerances diameters and positions good to 4 mil surface flatness and levels good to 1 mil surface flatness and levels good to 4 mil ladder chuck.SLDPRT

10 ladder chuck parts ladder chuck handle.SLDPRT, 1 of 2 plunger pin 3 lb MMC 3360A330, 1 of 4 ladder chuck.SLDPRT ¼-20 x 1in, 1 of 4 ladder chuck.SLDASM

11 ladder chuck features 1/4 pipe tap for Push-to-Conn Tube Fitting 90 Deg Elbow for 3/8" Tube OD X 1/4" NPTF Male Pipe MMC 9087K239087K23 ¼-20 tap same other end 1/4 -20 x 2 helicoil break external edges ladder chuck.SLDPRT

12 under side with fittings