4. A: d0=d2-d1
B:d0=d2/d1
C:d0=d2
D=d1+d2
A: d0=d2-d1

5. INSERT left side of pin A to Left hole of Block B

6. or

7. What is the fillet Radius?
What is the depth of the counter bore?
What is the Diameter of the center hole?
What type of view was placed on the right?
R0.25
0.25
1.60” Diameter since R0.80”
Full Section

8. You should be able to identify all lines and know their precedence

9. 6 quarts
3 quarts
5 quarts
4 quarts

11. One degree of freedom – Rotation around the Y-axis

12. 3rd choice

14. 2nd choice

16. FASLE – There are no features to be shown on the inclined surface

18. You should be able to identify all the lines and know there precedence

19. You should be able to identify all these terms

20. You should be able to identify all these terms (except for subordination)