Presentation is loading. Please wait.

Presentation is loading. Please wait.

Prototype Review 04-Sept-2008. Different side-closeout to allow petal end-insertion concept…self- guided… Only backup from last review in July…

Published bySheryl Wade Modified over 8 years ago

Similar presentations

Presentation on theme: "Prototype Review 04-Sept-2008. Different side-closeout to allow petal end-insertion concept…self- guided… Only backup from last review in July…"— Presentation transcript:

1 Prototype Review 04-Sept-2008

2 Different side-closeout to allow petal end-insertion concept…self- guided… Only backup from last review in July…

3 First thoughts… End insertion mechanism by self- guided rails would be interesting… How do we assemble the petals in here?

4 New concept… (from David Lynn) We still need to check if the end-insertion is possible with this system… taking into consideration that the petal it is not squared… The main advantages: -CF tubes are supplied by vendor… -Mass and Radiation length advantage… -Others…

5 CF TUBES HOLES FOR POSITIONING-PINS SI SHAPE ALREADY MODIFIED. DUMMY SENSORS WILL BE READY MIDDLE-END SEPTEMBER CLEARANCE BETWEEN HONEYCOMB AND REST OF COMPONENTS INCREASED TO 0,125” IMPROVEMENTS FROM LAST REVIEW…

6 CF TUBES HOLES FOR POSITIONING PINS ASSEMBLY TOLERANCES POCOFOAM & HONEYCOMB… HONEYCOMB THICKNESS STRAIGHT POCOFOAM CURVED POCOFOAM SS TUBE: OD: 0,109” ID: 0,085” FIXED DIMENSION FROM VENDOR CONTINUE IMPROVEMENTS AND MODIFICATIONS…

7 FIRST THOUGHTS FOR TOOLING… (FROM CARL AND GIL TEAM…) http://phyweb.lbl.gov/atlaswiki/index.php?title=ATLAS_Upgrade_RandD_-_Mechanical_Studies#Drawings_and_Procedures HOLES FOR ALIGNMENT VACUUM CHUCK FACING ALIGNMENT HONEYCOMB PLATE NEXT TODO: TECH. DRAWINGS FOR TOOLING

Download ppt "Prototype Review 04-Sept-2008. Different side-closeout to allow petal end-insertion concept…self- guided… Only backup from last review in July…"

Similar presentations

Manchester 09/sept/2008A.Falou & P.Cornebise {LAL-Orsay}1 CALICE Meeting/ Manchester Sept 2008 SLAB Integration & Thermal Measurements.

Manchester 09/sept/2008A.Falou & P.Cornebise {LAL-Orsay}1 CALICE Meeting/ Manchester Sept 2008 SLAB Integration & Thermal Measurements.
1 st Petal Prototype Fabrication completed October 27, 2008.

1 st Petal Prototype Fabrication completed October 27, 2008.
Stave Vacuum Tool Tim WP4 Face to Face Liverpool, 13/11/14.

Stave Vacuum Tool Tim WP4 Face to Face Liverpool, 13/11/14.
1 David Santoyo Petal Locking Points: AUW Nov 2014 Petal Locking Points.

1 David Santoyo Petal Locking Points: AUW Nov 2014 Petal Locking Points.
Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.

Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.
ATLAS Pixel Detector February 2003 N. Hartman LBNL 1 Pixel Support Tube PRR: Assembly, Production, Schedule February 2003.

ATLAS Pixel Detector February 2003 N. Hartman LBNL 1 Pixel Support Tube PRR: Assembly, Production, Schedule February 2003.
2012.03.21, CLIC Test Module Meeting Status of the DB Quad adjustable support design Mateusz Sosin CLIC Module WG Meeting, 22-May-2013.

, CLIC Test Module Meeting Status of the DB Quad adjustable support design Mateusz Sosin CLIC Module WG Meeting, 22-May-2013.
MICE Installation and Commissioning meeting RAL, 12 June 2007 Diffuser Oxford University.

MICE Installation and Commissioning meeting RAL, 12 June 2007 Diffuser Oxford University.
Geometric Dimensioning and Tolerancing

Geometric Dimensioning and Tolerancing
Stave core assembly Stephanie Yang WP4 face to face meeting, Lancaster University 20 Feb 2014.

Stave core assembly Stephanie Yang WP4 face to face meeting, Lancaster University 20 Feb 2014.
DELTA Quadrant Tuning Y. Levashov, E. Reese. 2 Tolerances for prototype quadrant tuning Magnet center deviations from a nominal center line < ± 50  m.

DELTA Quadrant Tuning Y. Levashov, E. Reese. 2 Tolerances for prototype quadrant tuning Magnet center deviations from a nominal center line < ± 50  m.
ZQNA Electrostatic Quadrupoles for ELENA Transfer Lines 1.Conceptual design 2.Performance 3.Engineering details 4.Interfaces 5.Production planning D. Barna,

ZQNA Electrostatic Quadrupoles for ELENA Transfer Lines 1.Conceptual design 2.Performance 3.Engineering details 4.Interfaces 5.Production planning D. Barna,
Tooling and assembly of US stavelet at Berkeley S. Díez Cornell, C. H. Haber, M. Defferrard, R. Witharm Sept 6th, 2012 Berkeley mechanical meeting, 5th-7th.

Tooling and assembly of US stavelet at Berkeley S. Díez Cornell, C. H. Haber, M. Defferrard, R. Witharm Sept 6th, 2012 Berkeley mechanical meeting, 5th-7th.
Recent Mechanical Barrel Stave Development BNL; S. Duffin, A. Gordeev, D. Lynn, G. Mahler: LBNL; C. Haber, M. Gilchriese: Yale; W. Emmett, A. Martin, P.

Recent Mechanical Barrel Stave Development BNL; S. Duffin, A. Gordeev, D. Lynn, G. Mahler: LBNL; C. Haber, M. Gilchriese: Yale; W. Emmett, A. Martin, P.
Geometric Dimensioning and Tolerancing

Geometric Dimensioning and Tolerancing
1 GLASTGLAST Pisa GLAST Italia meeting, 18/02/02 A.Brez – INFN Pisa GLAST:Gamma Ray Large Area Telescope Ladders, Trays and Towers Construction A.Brez.

1 GLASTGLAST Pisa GLAST Italia meeting, 18/02/02 A.Brez – INFN Pisa GLAST:Gamma Ray Large Area Telescope Ladders, Trays and Towers Construction A.Brez.
Ciemat Mechanical Structure Proposal for a DHCAL m 3 Prototype. Enrique Calvo Alamillo Paris 19-1-2009.

Ciemat Mechanical Structure Proposal for a DHCAL m 3 Prototype. Enrique Calvo Alamillo Paris
FEBRUARY 2003 Pixel Support Tube A. Smith LBNL 1 ATLAS Pixel Support Tube PRR: Parts Pixel Support Tube Production Readiness Review Parts Overview Alexis.

FEBRUARY 2003 Pixel Support Tube A. Smith LBNL 1 ATLAS Pixel Support Tube PRR: Parts Pixel Support Tube Production Readiness Review Parts Overview Alexis.
Update on alignment kit and stave 250 frame M.Gibson (RAL) 1.

Update on alignment kit and stave 250 frame M.Gibson (RAL) 1.
EC front unit status. Outline Conclusions from mechanical prototype and actions taken Status of electrical prototype KIT’s work for TA Dev plan (tests)

EC front unit status. Outline Conclusions from mechanical prototype and actions taken Status of electrical prototype KIT’s work for TA Dev plan (tests)

Similar presentations

Ads by Google