All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Cover Page

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Alarm configuration 5 different Alarm actions/ Alarm level are possible 4 different alarm levels / channel are possible 7 different alarm types are available Dynamic alarm file

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Alarm settings location To get the alarm settings, open the project configuration (Click or Project, Configuration) and click or options, alarm settings.

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Alarm settings Open a alarm message in the alarm window Set a digital output (Relays) Send a SMS * Send an * Run a script ** 5 different alarm actions are possible: * Only available in combination with the SMS-E-Option ** Only available in combination with the Script-Option

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Alarm action 1 Click “Add message” Type in the message Confirm by “OK”  The message is available in all channel alarms 1) Open a alarm message in the alarm window

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Alarm action 2 Click “Add digital output” Select the digital output * Set the behaviour  The output is available for all channel alarms 2) Set a digital output (Relays) * The relays-card must be available in the PC and added in the device configuration (MCDRV)

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Alarm action 3 Click “Add SMS” Type in different mobile numbers of desired recipients * Type in an alarm message up to 160 signs  The SMS dispatch is available for all channel alarms 3) Send a SMS with an alarm message * Correct SMS-settings must be done. See “MCPS-Settings”

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Alarm action 4 Click “Add ” Type in valid - Addresses of maximum 2 recipients * Type in a subject Type in the alarm message  The dispatch is available for all channel alarms 4) Send an with an alarm message * Correct -settings must be done. See “MCPS-Settings”

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Alarm action 5 Click “Add script” Select the desired script, which should be started in case of an alarm  The start of this script is available for all channel alarms 5) Run a script in case of an alarm

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Channel alarms location To get the channel alarms, open the project configuration (Click or Project, Configuration) and click.

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Channel alarms 4 different alarm level with 5 different alarm actions/alarm level possible Checking external device alarms Dynamic alarm file

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Channel alarm types Select your alarm type: H=High alarm L=Low alarm DH/DL=Delta High/Low alarm Exceeding/Remaining under the difference Actual value – last measured value DHS/DHL= Delta High/Low saved Exceeding/Remaining under the difference Actual value – last saved value (Important in case of data reduction) External alarms

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Channel alarms Select the alarm value Select the color for color break in case of an alarm. (In all data windows) Activate the control of the data reduction Activate the control of the generation of Autofiles Checking the device for external device alarms Select a length of time for alarm delay Activate the logging of all alarms to the alarm logfiles

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Channel alarm actions Click “Set” to configure the alarm actions Up to 5 different alarm actions/alarm level All defined alarm actions are available Stop of data acquisition in case of an alarm is possible

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Dynamic alarm file 1 Configure your project (Must be an autofile project!) Execute your reference measurement(s) Select the autofile of the optimum measurement as reference. (Project, Extras, Dynamic alarm file, New.) Open the dynamic alarm file. (Project, Extras, Dynamic alarm file, Edit.) Open Alarm file configuration in the context menu (Right mouse click in the graph, Extras, Alarm file configuration)

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Dynamic alarm file 2 Select the desired time section if more than one is available Select the channel you want to make the settings for. Enable/Disable checking of alarms for every channel Set the valid limit values for the chosen channel It’s possible to remove a time section if more than one is available Now the MCPS checks every value on crossing the reference and gives an alarm in case of this.

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Results 1: Dispatch of E- Mail and SMS (Display, Logfiles, Global and sms logfile) Relays are switched Script is worked off Predefined message in the alarm window with all information (Data acquisition, Alarm window)

All rights reserved, property and © CAD Computer GmbH & Co.KG 2009 Results 2: Color break in case of crossing a limit Alarm message in the alarm window, when values cross the limits Displaying the dynamic alarm file limits in addition to the measurement values