Cypress-Fairbanks I.S.D. 04/04/05 1 QUICK PAD PRO TRAINING MODULE

Cypress-Fairbanks I.S.D. 04/04/05 2 QUICK PAD PRO Reset On/Off Send File Spell Check Menu Esc Fn

Cypress-Fairbanks I.S.D. 04/04/05 3 QUICK PAD PRO Infrared Port USB Port

Cypress-Fairbanks I.S.D. 04/04/05 4 QUICK PAD PRO Battery Compartment 4 Rechargeable or AA Bottom Side

Cypress-Fairbanks I.S.D. 04/04/05 5 Setting Up the Device Turn on the device Press F7 to access the setup menu

Cypress-Fairbanks I.S.D. 04/04/05 6 MAIN MENU Word Processor F1 Setup F7 F1 F7

Cypress-Fairbanks I.S.D. 04/04/05 7 Initial Setup Select F7 for Setup Options Setting the Date : MM/DD/YY and Enter Setting the Time : HH/MM and A for AM or P for PM and Enter

Cypress-Fairbanks I.S.D. 04/04/05 8 Initial Setup Setting the IR Speed : Set at 8 for best results Select F8 for other setup options Setting the Idle Out Time: in minutes up to 75

Cypress-Fairbanks I.S.D. 04/04/05 9 Initial Setup Sticky Keys : The use of the SHIFT and CTRL keys. When enabled you can press SHIFT and release, and the next letter you press will be capitalized and then returns to lower case.

Cypress-Fairbanks I.S.D. 04/04/05 10 Initial Setup Set Key Speed : Key Delay: refers to the response sped from when you type a key to when it appears on the screen. 1 being the fastest and 4 being the slowest. Key Repeat: refers to the speed of repetition when you hold down a key. 1 being the fastest and 32 being the slowest.

Cypress-Fairbanks I.S.D. 04/04/05 11 Create a New File Press the “N” key at the main word processor menu Enter a file name when prompted Press ENTER and you are ready to begin

Cypress-Fairbanks I.S.D. 04/04/05 12 Edit an Existing File Select the file name from the box on the left side of the screen using the arrow keys Highlight the correct file Press ENTER to open the saved document

Cypress-Fairbanks I.S.D. 04/04/05 13 Save and Exit When finished with a document press “ESC” Save file under the current file name by pressing “Y” Save file under a new name by pressing “F” Exit program without saving changes by pressing “N”

Cypress-Fairbanks I.S.D. 04/04/05 14 Spell Check Spell Check key is located at the bottom left of the keyboard Misspelled words will appear in the top box Suggestions will appear in the bottom box Use QuickKEYS commands to edit and select words

Cypress-Fairbanks I.S.D. 04/04/05 15 Printing Methods Printing with an IR Pod: most common method Printing with USB Cables: alternate method

Cypress-Fairbanks I.S.D. 04/04/05 16 Printing with IR Pod Connect the thin rectangular end into the back of the computer Connect the square- shaped end to the back of the IR Pod

Cypress-Fairbanks I.S.D. 04/04/05 17 Printing with IR Pod Highlight the desired file on the device Open a word processing program on the computer Place the cursor where you wish the file to be inserted on the computer File names

Cypress-Fairbanks I.S.D. 04/04/05 18 Printing with IR Pod Place the device on a steady surface Point the IR area on the back of the device towards the IR Pod that is connected to the computer Do not move the device while data transfer is taking place otherwise data will be lost

Cypress-Fairbanks I.S.D. 04/04/05 19 Printing with IR Pod Press “Send File” key located in the upper right hand corner of the keyboard You should see the text appear in the word processing document Text that appears Send File

Cypress-Fairbanks I.S.D. 04/04/05 20 Printing with USB Cables Turn the QuickPad on Connect the thin rectangular end into the computer Connect the square-shaped end into the back of the QuickPad

Cypress-Fairbanks I.S.D. 04/04/05 21 Printing with USB Cables Highlight the desired file on the device Open a word processing program on the computer Place the cursor where you wish the file to be inserted on the computer File names

Cypress-Fairbanks I.S.D. 04/04/05 22 Printing with USB Cables Press “Send File” key located in the upper right hand corner of the keyboard You should see the text appear in the word processing document Text that appears Send File

Cypress-Fairbanks I.S.D. 04/04/05 23 Additional Information Screen Contrast: Press the “Fn” key and the up/down arrow keys Enlarge Font: Press the “Menu” key to change from 12 point font to 18 point font Fn Menu

Cypress-Fairbanks I.S.D. 04/04/05 24 Additional Information 500 pages and100 hours of power 16 lines per screen or 8 lines per screen

Cypress-Fairbanks I.S.D. 04/04/05 25 QuickKEYS General Commands: F1: Help Esc: Opens the save and exit screen CTRL-S: Save file without exiting ALT-F: Opens the file menu

Cypress-Fairbanks I.S.D. 04/04/05 26 QuickKEYS Editing Commands CTRL-C: Copy selected text CTRL-X: Cut selected text CTRL-V: Paste selected text

Cypress-Fairbanks I.S.D. 04/04/05 27 QuickKEYS Editing Commands CTRL-F: Find a text string Delete: Delete character at cursor Backspace: Delete character before the cursor

Cypress-Fairbanks I.S.D. 04/04/05 28 QuickKEYS Editing Commands Up/down arrow: Move cursor to pervious/next line Left/right arrow: Move cursor to previous/next character

Cypress-Fairbanks I.S.D. 04/04/05 29 QuickKEYS Editing Commands [PgUp]: Move cursor to previous page [PgDn]: Move cursor to next page [Home]: Move cursor to beginning of line

Cypress-Fairbanks I.S.D. 04/04/05 30 QuickKEYS Editing Commands [End]: Move cursor to end of line [CTRL-Home]: Move cursor to beginning of file [CTRL-End]: Move cursor to end of file

Cypress-Fairbanks I.S.D. 04/04/05 31 QuickKEYS Spell Check Commands [Spell Check]: Begin spell check [N]: Edit the misspelled word [S]: Choose a word from the list of selections

Cypress-Fairbanks I.S.D. 04/04/05 32 QuickKEYS Spell Check Commands [I]: Ignore and continue spell check [A]: Accept a suggestion [C] or [Esc]: Exit spell check

Cypress-Fairbanks I.S.D. 04/04/05 33 Select Text Hold down the SHIFT key while pressing an arrow key Left/Right arrows: select one letter at a time Up/Down arrows: select full lines Editing Commands: allow you to cut, copy or paste

Cypress-Fairbanks I.S.D. 04/04/05 34 Cut, Copy and Paste Copy & Paste: highlight the text and press CTRL – C Paste: move cursor to the appropriate area and press CTRL – V Cut: highlight the text and press CTRL – X