WELCOME to

Production activities Centralized Dimming System (CDS) Ballast (HID & FL) Centralized Dimming System (CDS) Ignitors (HID Lamps)

History of EITA Technologies 1995 SAFER Asia was incorporated 1997 SAFER Asia took over the mfg & distribution of REFAS products 1970’s SAFER Manufacturing Co. – start manufacturing of REFAS ballast 2005 SAFER Asia changed it’s name to EITA Technologies (M) S/B. Appointed as sole distributor for STUDER Cable 1997 Joint Venture with EITA – Promote & Expand REFAS products in Malaysia 2002 SAFER Asia became a wholly owned subsidary of EITA Group of Companies 2001 SAFER Asia was awarded the ISO9001:1994 QMS certification by LRQA LLoyd

ETM’s Business Segments One of the leading manufacturer of lighting ballast and component in Malaysia Product is known for it’s quality ,reliability and energy efficiency Reputation of our brand REFAS is because of our commitment towards quality Commitment to our Quality Management System Our business today includes the following range of product: Low Loss Ballast Energy Saving System Electronic Product Low Loss Ballast for HID Lamps Low Loss Ballast for FL CDS – Centralized Dimming System Dimming Ballast Electronic Ballast for FL Electronic Ignitors Power Switches

Electronic Products Electronic Ballast for T8,T5 & CFL lamps For lamps rating of 14W – 58W Tested and comply to IEC 61437, 60929, 6100 & EN 55015 Approved by ST & JKR For High Intensity Discharge lamps (Sodium & Metal Halide) For lamps rating of 70W – 1000W Low power losses < 3W Auto switch off function for end of life cycle Tested and comply to MS IEC 61347, 60927 & 60529

Low Loss Ballast for HID Low Loss Ballast for FL For T10 & T8 Fluorescent lamps lamps rating of 13W – 65W, 220-240V, 50/60Hz tested & comply to MS IEC 61347 / MS 141 approved by ST & JKR for Low Loss requirements of 6W For High Intensity Discharge lamps (Sodium, Mercury, Metal Halide) lamps rating of 35W – 2000W, 220-240V 415V, 50/60Hz tested & comply to MS IEC 61347 / MS IEC 60923:2008 approved by JKR & TNB for Low Loss requirements Low Loss Ballast for HID All our ballast are manufacture using quality high temperature Enamelled Copper Wire and low loss grade Silicon Electrical Steel

Approvals and Certifications for REFAS Low Loss ballast SIRIM – Product Certification Licence Suruhanjaya Tenaga Approvals TNB COPA

Approvals and Certifications for REFAS Low Loss ballast SESCO East Malaysia Queensland Government, Australia

Business Premises Lighting Energy Saving System REFAS™ Centralized Dimming System (CDS) The REFAS Centralized Dimming System (CDS) is a energy saving system design for lighting dimming application. It is designed to provide flexibility in reducing energy consumption in lighting system, during off peak hours to reduce operating cost. The system consists of 3 preset level of power outputs, i.e. Full power, Dimmed Level 1 and Dimmed Level 2. The system is suitable for application in most of Malaysia’s highways, buildings, car parks, warehouses, sport halls etc.. Factories Warehouses Business Premises Lighting Highways Bridges Street Lighting

Flexibility REFAS™ Centralized Dimming System (CDS) Benefits- Energy Saving System REFAS™ Centralized Dimming System (CDS) Benefits- Adaptable to different lighting applications Programmable dimming periods Configurable for different lighting loads and design Provide 3 different levels of dimming Flexibility

Save Energy REFAS™ Centralized Dimming System (CDS) Benefits- Energy Saving System REFAS™ Centralized Dimming System (CDS) Benefits- To save energy when space is unoccupied. To maintain light level for safety and security reasons. Provide 15-25% of power saving Operation cost saving of 18-20% Low maintenance cost Reduction of CO2 emission ( Green House effect ) Save Energy

REFAS™ Centralized Dimming System (CDS) Energy Saving System REFAS™ Centralized Dimming System (CDS) CO2 Emission Reduction Nilai – Seremban Installation 25 Feeder Pillars – Annual Saving of 300,000kW/h Equivalent to the reduction of 167 Ton CO2 emission or 77kL of Oil Contribution in minimizing of Global Warming Effect

ETM’s Project Summary …… Ballast/Electronic Products- Kuala Lumpur International Airport (KLIA) Building Kuala Lumpur International Airport (KLIA) Covered Car Park SIRIM R&D Centre, Batang Kali Giant Supermarket, Kuantan New Pantai Expressway (NPE) Lebuh Raya Damansara – Puchong (LDP) PLUS North South Expressway High Court Building Jalan Duta Science Park III, Singapore VIP Complex & Police Station Changi Airport, Singapore Putra Jaya Administration Buildings Putra Heights Interchange Ipoh North & South Toll interchange JKR Jelapang to Lumut Interchange Gerbang Selatan CIQ Johor Baru Kuala Lumpur – Putrajaya Expressway (MEX) and others………… Putra Heights KLIA Jelapang-Lumut MEX Gerbang Selatan Nilai-Seremban

ETM’s Project Summary …… Energy Saving Products- CDS Kajang SILK Alor Setar Airport Alor Setar Cyberjaya Gerbang Selatan JB KL-Putrajaya (MEX) Nilai - Seremban Penang Bridge

Total number of CDS installed – 160 units From 2010 - Project Lebuhraya Pantai Timur Terengganu Eastern Disperal Link Expressway, Johor Baru Upgrading of LDP Expressway Upgrading of the PLUS North South Expressway Second Penang Bridge……

Saving Energy is OUR BUSINESS.

THE END HAVE A NICE DAY !!