Chamber testing
A/C on
Flushed and ran 3 fill/flush cycles Fill complete, A/C still on
Slower increase this time but heading towards a similar number
Levelled at around 230p/cc
Up to 600p/cc by midnight. Could this be related to the change in the bag volume (i.e. the negative pressure in the bag exposing a leak?)
Another increase started at 7am reached >1000p/cc by 9am – also very high NOx (92ppb) most of it NO (85ppb) at 9am. However, the NOx could be diffusion related
If there really was a leak, then it could only be exposed after about 9 hours of running with CPC, NOx, O3 sampling.