F aculty o f NGINEERIN G E Outcome Based Education (OBE) system Getting to know the mapping of Programme Outcomes (POs), Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree Description of how POs (Programme Outcomes) are linked to the PEOs PO1 Ability to acquire and apply fundamental principles of science and engineering -The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology -This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the development of engineering practices in the industries in Malaysia -Related to PEO 1 PO2 Capability to communicate effectively -Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational -To be a good leader, effective communication is a must -Related to PEOs 1 and 2 PO3 Acquisition of technical competence in specialised areas of engineering discipline -The graduates have been prepared with comprehensive knowledge in the field of electrical engineering and trained with practical laboratory experiments -The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems -Related to PEOs 1 and 2 PO4 Ability to identify, formulate and model problems and find engineering solutions based on a systems approach -To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach -Related to PEOs 1 and 2 PO5 Ability to conduct investigation and research on engineering problems in a chosen field of study -The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions -The graduates will be able to tackle on problems and improvement by conducting research in the field of electrical engineering and this will equip them with the capability of becoming not only as an engineer but also a researcher in developing new technologies - Related to PEO 1 PO6 Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions -As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure the design is cost-effective, reliable, and has a great sustainability -Related to PEO 2 PO7 Understanding and commitment to professional and ethical responsibilities -The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues -Related to PEOs 1 and 2 PO8 Ability to work effectively as an individual, and as a member/leader in a team -In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently but also as a part of a team -Related to PEOs 1 and 2 PO9 Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills -In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management, leadership and entrepreneurial skills -Related to PEOs 1 and 2 PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer -The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental responsibilities and the need for sustainable development -Related to PEO 2 PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning - The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and life-long learning - Related to PEOs 1 and 2 B.Eng. (Hons) Electrical Vision Mission PEO PO PEO1. To produce highly competent engineers in electrical engineering (Related to M1 & M2) PEO2. To develop technical leaders who understand the power systems and related industry needs of the country (Related to M1 & M3) M1. To produce multi- skilled graduates who are able to spearhead nation-building in the Information Age To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia M2. To provide opportunities and resources for academic and researchers to carry out the state-of-the-art research and development work M3. To support the growth of nationwide ICT industry through provision of continuous professional development of knowledge PO2 PO1 PO3 PO4 PO5PO6 PO7 PO8 PO9PO10 PO11

F aculty o f NGINEERIN G E Outcome Based Education (OBE) system Getting to know the mapping of Programme Outcomes (POs), Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree Description of how POs (Programme Outcomes) are linked to the PEOs PO1 Ability to acquire and apply fundamental principles of science and engineering -The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology -This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the development of engineering practices in the industries in Malaysia PO2 Capability to communicate effectively -Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational -To be a good leader, effective communication is a must PO3 Acquisition of technical competence in specialised areas of engineering discipline - The graduates have been prepared with comprehensive knowledge in the field of electronics engineering and trained with practical laboratory experiments - The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems PO4 Ability to identify, formulate and model problems and find engineering solutions based on a systems approach - To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach PO5 Ability to conduct investigation and research on engineering problems in a chosen field of study -The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions -The graduates will be able to tackle problems and suggest improvements by conducting research in the fields of electronics engineering and this will equip them with the capability of becoming not only an engineer but also as a researcher in developing new technologies PO6 Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions - As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable PO7 Understanding and commitment to professional and ethical responsibilities -The graduates are made aware of the need to implement and develop technology through good engineering conduct -With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues PO8 Ability to work effectively as an individual, and as a member/leader in a team - The development of an outstanding leader will come with good team work and thus the Programme is aimed at producing an engineer who is not only capable of working independently but also as a part of a team PO9 Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills - In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management, leadership and entrepreneurial skills PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer - The graduates are to be made aware of, and understand their roles as engineers in the society. These include the awareness of the social, cultural, global and environmental responsibilities and the need for sustainable development PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning - The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and life-long learning B.Eng. (Hons) Electronics PEO1. To develop competent engineers and technical leaders to support the electronic industry especially in manufacturing, design and R&D in microelectronics (Related to M1& M2 & M3) M1. To produce multi-skilled graduates who are able to spearhead nation- building in the Information Age To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia M2. To provide opportunities and resources for academic and researchers to carry out the state-of-the-art research and development work M3. To support the growth of nationwide ICT industry through provision of continuous professional development of knowledge PO2 PO1 PO3 PO4 PO5PO6 PO7 PO8 PO9PO10 PO11 Vision Mission PEO PO

F aculty o f NGINEERIN G E Outcome Based Education (OBE) system Getting to know the mapping of Programme Outcomes (POs), Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree Description of how POs (Programme Outcomes) are linked to the PEOs PO1 Ability to acquire and apply fundamental principles of science and engineering -The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology -This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the development of engineering practices in the industries in Malaysia -Related to PEO 1 PO2 Capability to communicate effectively - Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational - To be a good leader, effective communication is a must - Related to PEOs 1 and 2 PO3 Acquisition of technical competence in specialised areas of engineering discipline - The graduates have been prepared with comprehensive knowledge in the field of computer engineering as well as trained with practical laboratory experiments - The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems - Related to PEOs 1 and 2 PO4 Ability to identify, formulate and model problems and find engineering solutions based on a systems approach - To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach - Related to PEOs 1 and 2 PO5 Ability to conduct investigation and research on engineering problems in a chosen field of study -The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions -The graduates will be able to tackle on problems and improvement by conducting research in the field of computer engineering and this will equip them with the capability of becoming not only as an engineer but also a researcher in developing new technologies - Related to PEO 1 PO6 Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions - As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable - Related to PEO 2 PO7 Understanding and commitment to professional and ethical responsibilities -The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues -Related to PEOs 1 and 2 PO8 Ability to work effectively as an individual, and as a member/leader in a team -In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently but also as a part of a team -Related to PEOs 1 and 2 PO9 Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills -In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management, leadership and entrepreneurial skills -Related to PEOs 1 and 2 PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer -The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental responsibilities and the need for sustainable development -Related to PEO 2 PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning -The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and life-long learning -Related to PEOs 1 and 2 B.Eng. (Hons) Electronics majoring in Computer PEO1. To train and nurture competent technical and engineering leaders in support of the activities in the computer / computing industry (Related to M1 & M3) PEO2. To produce versatile engineers with the ability to consistently synthesise new technologies in the computer/computing sector (Related to M1 & M2) M1. To produce multi-skilled graduates who are able to spearhead nation-building in the Information Age To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia M2. To provide opportunities and resources for academic and researchers to carry out the state-of- the-art research and development work M3. To support the growth of nationwide ICT industry through provision of continuous professional development of knowledge PO2 PO1 PO3 PO4 PO5PO6 PO7 PO8 PO9PO10 PO11 Vision Mission PEOPEO PO

F aculty o f NGINEERIN G E Outcome Based Education (OBE) system Getting to know the mapping of Programme Outcomes (POs), Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree Description of how POs (Programme Outcomes) are linked to the PEOs PO1 Ability to acquire and apply fundamental principles of science and engineering -The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology -This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the development of engineering practices in the industries in Malaysia -Related to PEO 1 PO2 Capability to communicate effectively - Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational - To be a good leader, effective communication is a must - Related to PEOs 1 and 2 PO3 Acquisition of technical competence in specialised areas of engineering discipline - The graduates have been prepared with comprehensive knowledge in the field of multimedia engineering as well as trained with practical laboratory experiments - The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems - Related to PEOs 1 and 2 PO4 Ability to identify, formulate and model problems and find engineering solutions based on a systems approach - To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach - Related to PEOs 1 and 2 PO5 Ability to conduct investigation and research on engineering problems in a chosen field of study -The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions -The graduates will be able to tackle on problems and improvement by conducting research in the field of multimedia engineering and this will equip them with the capability of becoming not only as an engineer but also a researcher in developing new technologies - Related to PEO 1 PO6 Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions - As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable - Related to PEO 2 PO7 Understanding and commitment to professional and ethical responsibilities -The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues -Related to PEOs 1 and 2 PO8 Ability to work effectively as an individual, and as a member/leader in a team -In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently but also as a part of a team -Related to PEOs 1 and 2 PO9 Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills -In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management, leadership and entrepreneurial skills -Related to PEOs 1 and 2 PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer -The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental responsibilities and the need for sustainable development -Related to PEO 2 PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning -The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and life-long learning -Related to PEOs 1 and 2 B.Eng. (Hons) Electronics majoring in Multimedia PEO1. To train and nurture competent technical and engineering leaders in support of the activities in the electronics and multimedia engineering industry (Related to M1 & M3) PEO2. To produce versatile engineers with the ability to consistently synthesise new technologies in the electronics and multimedia engineering sector (Related to M1 & M2) M1. To produce multi-skilled graduates who are able to spearhead nation-building in the Information Age To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia M2. To provide opportunities and resources for academic and researchers to carry out the state-of- the-art research and development work M3. To support the growth of nationwide ICT industry through provision of continuous professional development of knowledge PO2 PO1 PO3 PO4 PO5PO6 PO7 PO8 PO9PO10 PO11 Vision Mission PO PEO

F aculty o f NGINEERIN G E Outcome Based Education (OBE) system Getting to know the mapping of Programme Outcomes (POs), Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree Description of how POs (Programme Outcomes) are linked to the PEOs PO1 Ability to acquire and apply fundamental principles of science and engineering -The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology -This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the development of engineering practices in the industries in Malaysia -Related to PEO 1 PO2 Capability to communicate effectively - Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational - To be a good leader, effective communication is a must - Related to PEOs 1 and 2 PO3 Acquisition of technical competence in specialised areas of engineering discipline - The graduates have been prepared with comprehensive knowledge in the field of telecommunications engineering as well as trained with practical laboratory experiments - The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems - Related to PEOs 1 and 2 PO4 Ability to identify, formulate and model problems and find engineering solutions based on a systems approach - To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach - Related to PEOs 1 and 2 PO5 Ability to conduct investigation and research on engineering problems in a chosen field of study -The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions -The graduates will be able to tackle on problems and improvement by conducting research in the field of telecommunications engineering and this will equip them with the capability of becoming not only as an engineer but also a researcher in developing new technologies - Related to PEO 1 PO6 Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions - As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable - Related to PEO 2 PO7 Understanding and commitment to professional and ethical responsibilities -The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues -Related to PEOs 1 and 2 PO8 Ability to work effectively as an individual, and as a member/leader in a team -In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently but also as a part of a team -Related to PEOs 1 and 2 PO9 Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills -In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management, leadership and entrepreneurial skills -Related to PEOs 1 and 2 PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer -The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental responsibilities and the need for sustainable development -Related to PEO 2 PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning -The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and life-long learning -Related to PEOs 1 and 2 B.Eng. (Hons) Electronics majoring in Telecommunications PEO PO PEO1. To produce all-rounded engineers in the telecommunications technologies in support of the emerging ICT industry (Related to M1 & M2 & M3) PEO2. To develop capable technical leaders who are able to spearhead the advancement of telecommunications in the country (Related to M1 & M3) M1. To produce multi-skilled graduates who are able to spearhead nation-building in the Information Age To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia M2. To provide opportunities and resources for academic and researchers to carry out the state-of- the-art research and development work M3. To support the growth of nationwide ICT industry through provision of continuous professional development of knowledge PO2 PO1 PO3 PO4 PO5PO6 PO7 PO8 PO9PO10 PO11 Vision Mission

F aculty o f NGINEERIN G E Outcome Based Education (OBE) system Getting to know the mapping of Programme Outcomes (POs), Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree LASER DIODE Description of how POs (Programme Outcomes) are linked to the PEOs PO1 Ability to acquire and apply fundamental principles of science and engineering -The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology -This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the development of engineering practices in the industries in Malaysia -Related to PEO 1 PO2 Capability to communicate effectively - Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational - To be a good leader, effective communication is a must - Related to PEOs 1 and 2 PO3 Acquisition of technical competence in specialised areas of engineering discipline - The graduates have been prepared with comprehensive knowledge in the fields of electronics and optical engineering as well as trained with practical laboratory experiments - The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems - Related to PEOs 1 and 2 PO4 Ability to identify, formulate and model problems and find engineering solutions based on a systems approach - To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach - Related to PEOs 1 and 2 PO5 Ability to conduct investigation and research on engineering problems in a chosen field of study -The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions -The graduates will be able to tackle on problems and improvement by conducting research in the fields of electronics and optical engineering and this will equip them with the capability of becoming not only as an engineer but also a researcher in developing new technologies - Related to PEO 1 PO6 Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions - As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable - Related to PEO 2 PO7 Understanding and commitment to professional and ethical responsibilities -The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues -Related to PEOs 1 and 2 PO8 Ability to work effectively as an individual, and as a member/leader in a team -In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently but also as a part of a team -Related to PEOs 1 and 2 PO9 Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills -In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management, leadership and entrepreneurial skills -Related to PEOs 1 and 2 PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer -The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental responsibilities and the need for sustainable development -Related to PEO 2 PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning -The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and life-long learning - Related to PEOs 1 and 2 B.Eng. (Hons) Electronics majoring in Optical Engineering PEO2. To produce technical leaders who are innovative in implementing acquired knowledge in the photonics industry (Related to M1 & M3) M1. To produce multi-skilled graduates who are able to spearhead nation-building in the Information Age To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia M2. To provide opportunities and resources for academic and researchers to carry out the state-of- the-art research and development work M3. To support the growth of nationwide ICT industry through provision of continuous professional development of knowledge PO2 PO1 PO3 PO4 PO5PO6 PO7 PO8 PO9PO10 PO11 Vision MissionMission PEO PO Integration of optical devices on a chip PEO1. To develop highly competent engineers who are acquainted with the latest developments in the emerging photonics technology (Related to M1 & M2)

F aculty o f NGINEERIN G E Outcome Based Education (OBE) system Getting to know the mapping of Programme Outcomes (POs), Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree Description of how POs (Programme Outcomes) are linked to the PEOs PO1 Ability to acquire and apply fundamental principles of science and engineering -The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology -This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the development of engineering practices in the industries in Malaysia -Related to PEO 1 PO2 Capability to communicate effectively - Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational - To be a good leader, effective communication is a must - Related to PEOs 1 and 2 PO3 Acquisition of technical competence in specialised areas of engineering discipline - The graduates have been prepared with comprehensive knowledge in the field of nano engineering as well as trained with practical laboratory experiments - The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems - Related to PEOs 1 and 2 PO4 Ability to identify, formulate and model problems and find engineering solutions based on a systems approach - To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach - Related to PEOs 1 and 2 PO5 Ability to conduct investigation and research on engineering problems in a chosen field of study -The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions -The graduates will be able to tackle on problems and improvement by conducting research in the field of nano engineering and this will equip them with the capability of becoming not only as an engineer but also a researcher in developing new technologies - Related to PEO 1 PO6 Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions - As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable - Related to PEO 2 PO7 Understanding and commitment to professional and ethical responsibilities -The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues -Related to PEOs 1 and 2 PO8 Ability to work effectively as an individual, and as a member/leader in a team -In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently but also as a part of a team -Related to PEOs 1 and 2 PO9 Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills -In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management, leadership and entrepreneurial skills -Related to PEOs 1 and 2 PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer -The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental responsibilities and the need for sustainable development -Related to PEO 2 PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning -The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and life-long learning -Related to PEOs 1 and 2 B.Eng. (Hons) Electronics majoring in Nanotechnology PEO1. To train and nurture competent technical and engineering leaders in support of the activities in the nanoscale electronics industry (Related to M1 & M3) PEO2. To produce versatile engineers with the ability to consistently synthesise new technologies in the nanoelectronics sector (Related to M1 & M2) M1. To produce multi-skilled graduates who are able to spearhead nation-building in the Information Age To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia M2. To provide opportunities and resources for academic and researchers to carry out the state-of- the-art research and development work M3. To support the growth of nationwide ICT industry through provision of continuous professional development of knowledge PO2 PO1 PO3 PO4 PO5PO6 PO7 PO8 PO9PO10 PO11 Vision Mission PEO PO

F aculty o f NGINEERIN G E Outcome Based Education (OBE) system Getting to know the mapping of Programme Outcomes (POs), Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree Description of how POs (Programme Outcomes) are linked to the PEOs PO1 Ability to acquire and apply fundamental principles of science and engineering -The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology -This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the development of engineering practices in the industries in Malaysia -Related to PEO 1 PO2 Capability to communicate effectively - Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational - To be a good leader, effective communication is a must - Related to PEOs 1 and 2 PO3 Acquisition of technical competence in specialised areas of engineering discipline - The graduates have been prepared with comprehensive knowledge in the field of microwave and RF engineering as well as trained with practical laboratory experiments - The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems - Related to PEOs 1 and 2 PO4 Ability to identify, formulate and model problems and find engineering solutions based on a systems approach - To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach - Related to PEOs 1 and 2 PO5 Ability to conduct investigation and research on engineering problems in a chosen field of study -The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions -The graduates will be able to tackle on problems and improvement by conducting research in the fields of microwave and RF engineering and this will equip them with the capability of becoming not only as an engineer but also a researcher in developing new technologies - Related to PEO 1 PO6 Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions - As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable - Related to PEO 2 PO7 Understanding and commitment to professional and ethical responsibilities -The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues -Related to PEOs 1 and 2 PO8 Ability to work effectively as an individual, and as a member/leader in a team -In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently but also as a part of a team -Related to PEOs 1 and 2 PO9 Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills -In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management, leadership and entrepreneurial skills -Related to PEOs 1 and 2 PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer -The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental responsibilities and the need for sustainable development -Related to PEO 2 PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning -The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and life-long learning -Related to PEOs 1 and 2 B.Eng. (Hons) Electronics majoring in Microwave and Communications Vision Mission PEOPEO PO PEO1. To train and nurture competent technical and engineering leaders in support of the activities in the microwave and radiofrequency (RF) electronics industry (Related to M1 & M3) PEO2. To produce versatile engineers with the ability to consistently synthesize new technologies in the microwave and radiofrequency (RF) electronics engineering sector (Related to M1 & M2) M1. To produce multi-skilled graduates who are able to spearhead nation-building in the Information Age To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia M2. To provide opportunities and resources for academic and researchers to carry out the state-of- the-art research and development work M3. To support the growth of nationwide ICT industry through provision of continuous professional development of knowledge PO2 PO1 PO3 PO4 PO5PO6 PO7 PO8 PO9PO10 PO11