Introducing GAC’s New Line of Intelligent Generator Set Controllers

The InteliSys Stand-By, Prime Mover (single and multiple set), and Parralel to Utility (single and multiple set) Applications Features: 320 x 240 LCD 16 / 14 Discrete Inputs and Outputs (Configurable) Expandable to 128 / 70 4 Analog Inputs (Fuel Level, Coolant Temp., Oil Press.) Expandable to 68 and 1 Analog Output Speed Measurement (Mag Pick-Up) 3 Phase Generator / Utility Voltage 3 Phase Generator / 1 Phase Utility Current Measurement RS232 for Direct Communication Remote Communication (Analog, Internet, and GSM)

InteliSys Connections 1 Phase Utility Current 3 Phase Generator Current 3 Phase Generator / Utility Voltage 16 Configurable Discrete Inputs RS232 for direct and modem connection CAN Connection For Extension Modules CAN Connection for Multiple Set Applications

InteliSys Connections Cont. Load Sharing Line Governor Output Output for AVRi Interface Analog Output 4 Analog Inputs Mag. Pick-up 2 Relay Outputs (Starter, Fuel Solenoid) 14 Configurable Discrete Outputs 12 or 24 V DC

InteliSys’s Versions InteliSys has three versions depending on the application it is intended for: iS-PCM, Power Control For single sets that will parallel with the Utility. iS-PCLSM, Power Control with Load Sharing For multiple sets that may or may not parallel with the Utility. iS-PCLSM-PMS, Load Sharing and Power Management The same as PCLSM with the added features of Volt and PF control.

AVR control (needs 18 V AC power supply) Expandable I / O Communications Modem Support (multiple set applications, iG-MU) Internet Support (iG-IB) InteliSys’s Modules

iS-BIN16/8 CAN Communication with InteliSys 16 Discrete Inputs and 8 Discrete Outputs Must Assign Controllers Address in InteliSys and on Module Up to 7 of these modules can be Connected to InteliSys

AVRi Module Input from PCLSM 18 V AC Power Supply Output for AVR Control DIN Rail Mounting Output Level Adjustment (turn pot)

iS-AIN8 CAN Communication with InteliSys 8 Analog Inputs Must Assign Controllers Address in InteliSys and on Module Up to 8 of these modules can be Connected to InteliSys

InteliMains: InteliGen With Special Software Mains (= Utility) Circuit Breaker Control –Reverse Synchronization –Vector surge protection (locally required) Power Management - Engine Usage Optimization –Number of running engines: Dependent on required load –Engine starting order: Dependent on running hours Import/Export Control

Parallel To Utility & Other Gen Set’s GG iS-PCLSM InteliMains iS-PCLSM

InteliSys’s User Friendly Operating Software Free User Friendly PC Format Controller Setpoints Values History

Value Screen All Metered Values in Real Time. Screen Selection Metering

History Every Action Logged All Values Associated w/ that Action Up to 177 events (FIFO)

Controller Same as Keypad Essential Metering Alarm List

Setpoints Change any Setpoint Current Value Range Screen Selection Value Acceptable Range for Parameter

Customizable Software Parameters Nominal RPM 80  300 Multilingual Texts Overspeed  Überdrehzahl  Sobrevelocidad Units °C  °F; kPa  bar  psi Controller Operating Mode SPM  SSB  SPtM  MINT  MEXT Text Water temp  Coolant temp

Local connection to the Control System Modem connection to remote monitoring* SMS (Mobile phones) connection* Internet connection* Communications

Controller Screens Water Temp 91°C Oil Pressure 5.1bar Fuel level 75% Battery voltage 25.2V Analog Meters Bar Graphs Numeric Values Controller Screens Allow for Similar Interface as WinEdit Software MAINS: V 50.0Hz GENERATOR: 1517RPM V 50.6Hz A 0.98L kW 118kVAr Running in Island

Setpoint Adjustment PARAMETERS MF-Start Delay 3s Start Attempts 5 Mains OK-Delay 10s Cooling time 30s Adjustable via iS Keypad Three Level Password Protection

History Screens A 62kVAr kW A 48kVAr kW 0 0 0A 0 0 0kW 0 0 0A 0 0 0kW -15 FINISHED HOUR 07:00: GCB CLOSED-ISLAND 06:23: ENGINE START 06:23: MF-MCB OPENED 06:23: kW 1503RPM 0.81L 88C 6.1bar 24.9V 84% 50kW 1495RPM 0.72L 25C 5.3bar 24.7V 87% 0kW 0RPM - 22C 0.0bar 25.8V 87% 0kW ORPM - 22C 0.0bar 25.8V 87% M 0 0 0V 0.0Hz G V 50.1Hz M 0 0 0V 0.0Hz G V 49.8Hz M 0 0 0V 0.0Hz G 0 0 0V 0.0Hz M V 48.7Hz G 0 0 0V 0.0Hz History Events Can be Viewed From iS Screens as well as WinEdit Viewed on Multiple Screens

Adjustable Delay Settings Five Protective Actions –Warning –Slow stop –Shut-down –Unloading –History Record Reset Function (Horn + Flashing Light) Protection Handling

Protections Generator / Utility Over / Under Voltage and Frequency Voltage and Current Asymmetry OverCurrent OverLoad Oil Pressure (two level: warning, shutdown) Coolant Temp. (two level: warning, shutdown) Fuel Level (two level: warning, shutdown) …

Summary The InteliSys offers solutions to applications you have never dreamed of. GAC Leaves it up to You to Make the Intelligent Choice!!