Now is this a high risk job?. HIGH RISK JOBS – RED CODE WORKING WITH ASBESTOS, OR UNDERTAKING A JOB WHERE THERE IS A LIKELIHOOD THAT ASBESTOS IS PRESENT.

Slides:



Advertisements
Similar presentations
Safety Absolutes Green Lake
Advertisements

Fall Protection Standard 29 CFR Part
CETI Programme.
Trainers Notes This package provides an overview of the major issues likely to impact on Group Training Organisations with the Introduction of the new.
Working at Height - Ladders. Legislation The Work at Height Regulations 2005 Ladders can be used for short duration work when: the risk assessment shows.
Take Ladder Safety One Rung at a Time
CLOW WATER Contractor Orientation April
OSHA’s Fall Protection Requirements
CONTRACTOR KILLED IN FALL FROM ROOF WORKING AT HEIGHT Work at height is work in any place at, above or below, ground level, where a person could be injured,
Ladder Safety Today’s topic is Ladder Safety. This training is a part of OSHA’s Portable Wood and Metal Ladder Safety Standards (29 CFR ). You.
Ladder Safety Today’s topic is Ladder Safety. This training is a part of OSHA’s Portable Wood and Metal Ladder Safety Standards (29 CFR ). You.
Ergonomics for School Custodians Many injuries can be prevented by following a safe work procedure. Safe work procedures are developed by spotting hazards,
Stairways and Ladders 1926 Subpart X - Stairways and Ladders
Learning Objectives Understand the OSHA requirements for fall protection during steel erection Understand the OSHA requirements for fall protection during.
FALL PROTECTION. What, me worry? According to the US DOL, falls are the leading cause of worker fatalities in the construction industry. On average, between.
OSHA Susan Harwood Training - AGC Fall Protection Susan Harwood Grant Training Program 2013 Scaffolds, Ladders and Lifts.
Roofing Fall Protection The following presentation can be used to satisfy the training requirements of the Fall Protection Standard in the WISHA Safety.
Working at Height Learning Lite Module. Why do we need to understand the risks? In 2008/09 there were 35 fatalities, 4654 major injuries and a further.
OSHA Office of Training & Education
Ladders Can take you… to great heights or on a quick trip to the ground.
Climbing the Ladder to Safety
1 The purpose is to prevent falls and reduce the consequences if a fall occurs when Working At Height. Use fall protection equipment when working outside.
OSHAX.org - The Unofficial Guide to the OSHA1 Stairways and Ladders.
Stairways and Ladders.
Walking-Working Surfaces: Preventing Falls.
Copyright ©2010 Progressive Business Publications 1 Preventing Slips, Trips & Falls.
1 Telecom Cabling Ladder safety. 2 OSHA Office of Training & Education ation Telecom Cabling Stairways and Ladders.
Most Frequently Cited Serious Violations Construction – FY 2008.
CONSTRUCTION SITE SAFETY An office worker’s overview of construction site hazards May 20, 2009 J. Manning.
LADDER & STAIRWAY SAFETY
Safety for Working in High Places
Harwood Grant #46J6-HT13Southwest Safety Training Alliance Inc1 Module 2 Fall Hazards Did you know? Falls from elevation account for one third of all deaths.
FALL PROTECTION. WHY? –BECAUSE: Falls accounted for 10% of fatal work injuries in 1994 & Serious hazards can be present while above ground. –Examples:
Slip, Trip and Fall Prevention
Rev: Section 1 Overview of Fall Protection.
Risk Management (Safe Work Method Statements)
Module 3: PPE 3.3 Training Susan Harwood Grant Number SH F-23.
Module 3: PPE 3.2 PPE Selection Susan Harwood Grant Number SH F-23.
Fall Hazards.
OSHA’s Fall Prevention Campaign
Annual Refresher Training Tools and Machine Guards.
Walking-Working Surfaces: Preventing Falls. Start Safe and Stay Safe In order to Start Safe and Stay Safe in the areas where you walk and work, you should.
Health & Safety Life Book AM ST p. 1 v.01 - Aug.18, 2011 Working at Height Portable Ladders Design Specifications The use of home made ladders.
Most Frequently Cited Serious Violations Construction – FY 2009 OSHA Federal Standards October 1, 2008 – September 30, 2009.
1 Falls Module 2. 2Objectives After this module you should be able to – identify the most common fall hazards – take the steps necessary to avoid those.
For the Pest Control Technician. It’s Just a Ladder! According to the US DOL, falls are the leading cause of worker fatalities in the construction industry.
Safety on Call LADDER SAFETY. Safety on Call LADDERS CAN TAKE YOU… To great heights or on a quick trip to the ground.
Falls From Height. Identifying fall hazards Falls are a major cause of workplace fatalities and serious injuries. There are many jobs that require people.
Fall Protection Training. - Falls remain the number one cause of fatalities in the construction industry. FALL PROTECTION FACT!!!
WEEKLY SAFETY MEETING September 22 nd, OGEC RIG RR 600 JOBI-4.
OSHA Office of Training & Education
Procedure for erection and use of mobile tower scaffolds (Revision 1 – 5 th April 2011) Toolbox talk.
BPS3413 CONSTRUCTION SAFETY Lecture 6 : Working at Height.
Procedure for Pedestrian Operated Mowers (Rotary and Cylinder) (Revision 1 – 23rd November 2010) Toolbox Talk.
OSHA Office of Training & Education
Gasunie is one of the biggest gas infrastructure companies in Europe. Within the company, we give safety the highest priority; it forms the basis of our.
12/07/2006 Rev B1 T-1160 Work Permits This work has been produced by DGL (Aust) Pty Ltd This Learner’s Tool is about the skills and knowledge required.
1OHS Training 2003Induction OHS Training Job Safety Analysis and Hazard management UEENEEE037B.
We always have time to work safely
Excavation Hazards & Controls.
Gasunie is one of the biggest gas infrastructure companies in Europe
DID YOU KNOW KEY CONTROLS CAN BE IMPLEMENTED TO REDUCE DROPS AND DROP-RELATED INJURIES Key controls include: DROP Zones – Restrict areas where there.
Safety is part of our culture at Halliburton
Regulation Updates in OSHA
Understanding your Workplace Specific Critical Controls
Understanding your Workplace Specific Critical Controls
Most Frequently Cited Serious Violations
This work has been produced by DGL (Aust) Pty Ltd
Work at Height – Ladders and Step Ladders
Presentation transcript:

Now is this a high risk job?

HIGH RISK JOBS – RED CODE WORKING WITH ASBESTOS, OR UNDERTAKING A JOB WHERE THERE IS A LIKELIHOOD THAT ASBESTOS IS PRESENT IS A HIGH RISK TASK FOR WHICH A JSA FORM MUST BE FILLED OUT PRIOR TO COMMENCEMENT OF WORK. ASBESTOS OR LEAD -Jobs that require us to work with asbestos or lead THE FOLLOWING IS A HIGH RISK TASK FOR WHICH A JSA FORM MUST BE FILLED OUT PRIOR TO COMMENCEMENT OF WORKS.

WORKING NEAR POWER LINES -Jobs that require us to work closer than 6 metres to a main power line on the street. And Closer than 2 metres to a private power line to a private house. GAS LINES -Jobs that require us to work near gas lines, or with gas lines. Natural or LPG DEMOLITION -Jobs that require us to carry out demolition works, stripping walls Pull off roofs, excavate concrete. HIGH RISK JOBS – RED CODE WORKING AT HEIGHTS -Jobs that require being more than 2 metres high (from the ground to your feet) THE FOLLOWING IS A LIST OF OTHER HIGH RISK TASKS FOR WHICH A JSA FORM MUST BE FILLED OUT PRIOR TO COMMENCEMENT OF WORKS.

Company name: Site name: Contractor: Activity: Date: Permit to work requirement: Approved by: Jsa no. YesNo Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. Who is responsible Write the name of the person responsible (supervisor or above) to implement the control measure identified. Remember: Each JSA must be site specific. Include all workers in the development of the JSA

The following is a guide only and for compiling your JSA, each job’s JSA must be completed on its own merits.

REMOVING A FLUE Working with asbestos, or undertaking a job where there is a likelihood that asbestos is present is a high risk task for which a JSA form must be filled out prior to commencement of work

Company name: Site name: Contractor: Activity: Date: Permit to work requirement: Approved by: Jsa no. YesNo KELLY PLUMBING DATE WORK BEGINS OFFICE TO ADVISE PHIL KELLY TO SIGN INSERT JOB NAME INSERT YOUR NAME REMOVING ASBESTOS FLUE

Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. 1 Identify material in flue  Site records  Visual inspection  Deem to be ACM (from knowledge & experience) Asbestos containing material Complete asbestos risk assessment GUIDE ONLY 2 Remove appliance 3 Access flue

Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. 4 Remove flue *NB time cannot exceed one hour  prepare for removal  remove flue  bag/wrap flue  dispose of flue Exposure to airborne asbestos fibres Creation of visible asbestos debris completed asbestos risk assessment restrict access to work area put all necessary equipment in place that is required for work don PPE wet down ACM take care to minimise breakage wet pipe surfaces in contact with ACM GUIDE ONLY DON’T FORGET YOUR PPE

Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. 5 Asbestos risk assessment must be completed prior to work commencing Visual inspection: no ACM debris double wrapped in 200  m plastic label as per EPA requirements seal as soon as practicable transport to licensed waste disposal site GUIDE ONLY DON’T FORGET YOUR PPE 6 Install new appliance 7 Install new flue

WORKING AT HEIGHTS -many jobs where asbestos may be present can also require being more than 2 metres high (measured from the ground to your feet)

AUTHORISED ROOF WORKS ACCORDING TO THE PITCH NO GO FLAT ROOF UP TO 5 DEGREES UP TO 25 DEGREES 25 TO 30 DEGREES 30 DEGREES AND OVER Complete your JSA and you are authorised to sign it off Complete your JSA and PHIL KELLY/Manager must sign the job off

PRE ROOF CHECKLIST Do you have your PPE Gear (Personal Protective Equipment) ? Are you authorised to work at that height ? Do you have your safety harness on board ? Does a guard rail need to be assembled ? DON’T GET LEFT HIGH & DRY, THINK ABOUT YOUR JOB BEFORE YOU START! Do you need any scaffolds, mobile lifts, boom equipment

Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. Getting on the roof  Using an extension ladder Falling Ladder Slipping Tie the ladder off top and bottom Wear your protective boots with grip (see your PPE) Use an approved ladder Have 3 points of contact on the ladder at all times Feet of the ladder in good order Make sure the ladder goes 900mm over the top of the roof, unless through a manhole Don’t go above 3 metres in height above the ground GUIDE ONLY DON’T FORGET YOUR PPE

Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. Getting on the roof  Using internal access Converts to a low risk task Do not go any closer than 2 metres to the edge GUIDE ONLY DON’T FORGET YOUR PPE

Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. Getting Materials on the roof 16kg and under use a bucket and a rope 16kg and over use a crane or the mobile forklight Back Injury Dropping Materials Or any other approved devices to carry equipment GUIDE ONLY DON’T FORGET YOUR PPE

Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. Working on the roof Wear your appropriate work boots with steel caps at all times ( (see your PPE) Slipping Falling Wear your roof harness if going closer then 2 metres to edge of roof and/or Use a guard rail if working closer then 2 metres to the edge Tripping Take your time, don’t run choose your foot holes carefully GUIDE ONLY DON’T FORGET YOUR PPE

Activity List the tasks required to perform the activity in the sequence they are carried out. Hazards Against each task list the hazard that could cause injury when the task is performed Risk control measures List the control measures required to eliminate or minimize the risk of injury arising from the identified hazard. Getting off the roof Make sure your ladder is secured Slipping Falling Disconnect your harness and make a slow decent after all equipment is disconnect and all materials are off the roof DISCONNECT YOUR HARNESS LAST Untie your ladder GUIDE ONLY DON’T FORGET YOUR PPE

END OF PRESENTATION Thankyou