Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Climatic design This workshop will look the importance of understanding.

Slides:



Advertisements
Similar presentations
What creates different climates in Canada and what impact does climate have on human activity? The Climates of Canada.
Advertisements

Topic: How Climate Affects Us
What should you think about when deciding where to put your building? The direction a building faces will impact on a lot more than the view – how do you.
Oslo, Norway Latitude: 59° 54' 36" N Longitude: / 10° 45' 00" E.
What Causes Climate? Chapter 18 Section 1.
Walls Ron Gatepain constructionsite.
Earth Systems and Patterns: SC.5.E.7.3
Lesson 3 How does radon enter a home?. Slide 3-1 Predicted average indoor radon levels (U.S.) This map cannot be used to determine the radon level of.
Unit 2 World Climate Patterns… An Introduction. Distinguish between the terms weather & climate. P. 54 Weather = the state of the atmosphere at any one.
Chapter 5: Designing for Heating and Cooling 5.1 Organizing the problem a) Fenestration How much is optimum for the building? What should the form of the.
Ch Factors That Affect Climate
1 Emergency and Transitional Shelter Concepts. 2 Definition of terms 1.What is “emergency shelter”? 2.What is “transitional shelter”? 3.What are “household.
Lesson 3 How does radon enter a home?. Slide 4-1 Predicted average indoor radon levels (U.S.) This map cannot be used to determine the radon level of.
Weather, Climate, Air Masses, and Global Winds
Earth’s Weather and Climate
What creates different climates in Canada and what impact does climate have on human activity? The Climates of Canada.
Climate and Climate Changes
Climate and Climate Change
Climate and Climate Change
Global Patterns & Relative Humidity
CHAPTER 5. * Weather is daily changes in temp and precipitation. * CLIMATE is the average year to year conditions.
HVAC523 Heat Gain. Heat First law of thermal dynamics states that HEAT TRAVELS FROM HOT TO COLD. 95 degree outside air will flow through the building.
Earth Science 17.3 Temperature Controls
ARC 435 Design Determinants for Arid Regions
1 By the end of this topic you should be able to:  explain with the aid of an annotated diagram, why Tropical latitudes receive more of the sun’s energy.
ARC 810: Building Climatology Department of Architecture, Federal University of Technology, Akure, Nigeria ARC 810: Building Climatology Department of.
Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by This session will look at the impacts on response of climatic.
Climate and Architecture Arch 331 Dr. Abdelrahman Elbakheit References العناصر المناخية و التصميم المعمارى, د. سعيد عبد الرحيم سعيد بن عوف.1 2. العمارة.
World Geography Chapter 3 Notes
Climatic Zones p P. 75 fig. 5.1.
Weather Temporary behavior of atmosphere (what’s going on at any certain time) Small geographic area Can change rapidly.
What causes climate ?.
EARTH’S CLIMATE. Latitude – distance north or south of equator Elevation – height above sea level Topography – features on land Water Bodies – lakes and.
Solar, Weather and Ocean Systems 8 th grade. Climate – refers to the average year-after-year conditions of temp., precipitation, winds, and clouds Climate.
Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by This workshop discusses implementing a strategy for supporting.
What causes Climate? Precipitation and Temperature Weather changes every day but climate refers to the average, year after year conditions of temperature,
Mr. Burton 3.1 Notes Please Grab: 1. Your folder. 2. Writing Utensil. 3. Answer the following question: What is the difference between weather and climate?
Unit 6.  Climate – the average weather conditions of an area over a long period of time  Weather is the day to day conditions *Climate you expect and.
Climate Chapter 25. Climate – the average weather conditions of an area over a long period of time –But weather is the day to day conditions Climate you.
9. THERMAL MASS  Thermal mass is a measure of a material's capacity to absorb heating or cooling energy. Materials such as concrete or bricks are highly.
Choice of Design Conditions 2 December 2015choise of design condition1.
Building Envelope. Physical separator between interior and exterior spaces – Walls – Floors – Roofs – Fenestrations (any opening in the structure) – Doors.
Chapter 5 Lesson 3 Global Patterns Pgs. 164 – 169 Benchmark: SC.6.E.7.3.
Climate: The average, year-after-year conditions of temperature, precipitation, winds and clouds in an area.
What is it?.  Climate is the name for the general conditions of temperature and precipitation for an area over a long period of time.
Radon in the home For most Americans, greatest exposure to radon is in home, especially in rooms that are Below grade (such as basements) In contact with.
Earth’s climate and how it changes
4-1 Role of Climate. 1.What is climate and what is weather? A. Climate refers to the average year after year conditions of temperature and precipitation.
THIS IS With Host... Your Modified T/F Modified T/F Multiple Choice Multiple Choice Completion.
Environmental house project Jack Bradley. What will be covered in this lecture? (1) Why people need a house (2) How technology provides a house (3) Design.
What Causes Climate? Notes. Introduction A climate is the average, year-after- year weather conditions in an area. Two factors are important in describing.
Ass.Professor GÜLTEN MANİOĞLU PASSIVE CLIMATISATION Environmental Control Studio Fall Term.
Developing a session plan S3.1 session day Text Dimension 40 Arial BOLD Position: Horizontal 5.44 Vertical 2.40 Text Dimension 24 Arial BOLD ITALICS Position:
Climate. Weather vs. Climate Weather – the condition of Earth’s atmosphere at a particular time and place. – Short-term: Hours and days – Localized: Town,
Unit 4: Climate Change Earth’s Climate System. Introduction Atmosphere: layer of gases that surrounds a planet or moon Without the atmosphere, days would.
Factors that Affect Climate What is Climate? Weather conditions of an area including any variations from the norm. Exchange of energy and moisture.
Climates of the Earth.
GREEN BUILDING MODEL Prashant Motwani (13MST0021)
Environmental house project
BUILDING SCIENCE-1 TOPIC- ROLE OF WARM AND HUMID CLIMATE
THE EARTH’S CLIMATE SYSTEM
Climatic design This workshop will look the importance of understanding how climate variations will impact on planning and design Aceh, Indonesia, 2007.
Climate.
Seasons, capacity and funding
Seasons, capacity and funding
BUILDING SCIENCE- 1 TOPIC- TR0PICAL UPLAND CLIMATE
Climate.
Climate.
Climate Climate Latitude
What creates different climates in Canada and what impact does climate have on human activity? The Climates of Canada.
Presentation transcript:

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Climatic design This workshop will look the importance of understanding how climate variations will impact on planning and design Aceh, Indonesia, 2007

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by The key learning objectives of this workshop are: 1. Presentation: defining the five climatic zones and making appropriate choices in climatic design and NFI selection 2. Workshop: settlement, shelter and NFIs in each of the five climatic zones: hot dry hot wet temperate cold locations at high altitude Objectives !

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Group 1:hot dry - temperature will vary from high daytime temperatures to low night-time temperatures Group 2:hot wet - temperature will remain constantly high throughout the year but precipitation levels will increase dramatically during the rainy seasons Group 3:temperate - seasonal variations in temperature and precipitation, extreme temperatures are unusual Group 4:cold - temperatures remain low throughout the year, or over winter only, often falling below zero Group 5:locations at high altitude – temperatures are very low during winter but may rise considerably in summer The five climatic zones Each group has been allocated one of the five climatic zones, characterised as follows: Discussion in groups

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Workshop activities A.draw a climate graph that describes the diurnal (daily and nightly) temperature range of your climatic zone B.produce a drawing that describes the main design considerations for a family shelter, specific to your designated climate zone C.develop a list of suitable NFIs to be supplied to the affected population, specific to your designated climate zone Each group will have 10 minutes to prepare the following three deliverables In your groups discuss and delegate the tasks below: Key point Each group agrees a key point

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Key point Group 1 key point: hot dry

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Hot dry: diurnal temperature and shelter Daytime Temperature (°C) Time (24 hours) small windows to prevent high solar gain during the day and heat loss at night insulating earth roofs provide thermal mass while thatched roofs insulate through the creation of an air chamber thick walls will reduce heat gain during the day and increase heat storage at night position doors and windows away from prevailing winds Below is a summary of diurnal variation in temperature and several key design considerations for a family shelter. Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Outdoor spaces are likely to be used for activities such as cooking and washing. Planning of outside space should be given as much consideration as the design and planning of shelter design and orientate external spaces to suit traditional use patterns, such as cooking an enclosed settlement plan will help to provide shade and protect from prevailing winds narrow street provide shade high thermal mass will minimise heat gain avoid removing trees and position buildings to provide shade from sun position buildings to protect from prevailing wind and sand storms Hot dry: settlement Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by consider the environmental impacts of harvesting construction materials such as timber and thatch variations in day and night temperatures may increase the need for household NFIs such as blankets and mattresses to improve the occupants thermal comfort at night NFIs may need protection from rodents and termites while in storage material selection may be affected by the amount of water required for their use in construction when using sheeting roofs, such as plastic or CGI, use a double skin with ventilation between to minimise heat radiation high afternoon temperatures may influence working times In hot and dry climates: Hot dry: NFIs and construction Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Key point Group 2 key point: hot wet

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Hot wet: diurnal temperature & shelter Hot wet Temperature (°C) Time (1 year) roof has sufficient pitch for water drainage surface water drainage roof overhang to protect walls drains connect to reservoir to harvest rainwater footing of walls protected with plaster or tiles compacted plinth, with raised floors to protect from flooding Below is a summary of diurnal variation in temperature and several key design considerations for a family shelter. Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by mud bricks will be difficult to produce if moisture levels are too high and will need protection from rain while drying a protective coating must be applied to timber to prevent rotting, which should be detailed to not contact with the ground select materials that maximise ventilation shelter and household NFIs will need protection from moisture, pests and rodents during storage and transportation heavy rain is likely to make the transportation of materials more difficult Important to consider the effects of moisture on materials: Hot wet: NFIs Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Key point Group 3 key point: temperate

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by protection from rain and flooding insulation against hot and cold temperatures shading from the sun flooring and fly sheet stove and fuel personal insulation as well as blanket and mattress Temperate: diurnal temperature & shelter Temperature (°C) Time (1 year) Below is a summary of diurnal variation in temperature and several key design considerations for a family shelter. Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Consider various climatic conditions including cold, hot and wet shelter NFIs supported by household NFIs such as clothing, blankets and fuel to protect from cold temperatures shelter and household NFIs will need protection from the cold and wet during storage and transportation seasonal climatic variation must be considered when transporting materials, for example transportation will be more difficult in snow and ice shelters should be designed, and household NFIs supplied to meet the worst likely weather conditions Temperate: NFIs Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Key point Group 4 key point: cold

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Cold: diurnal temperature & shelter 0 °C Temperature (°C) Time (1 year) Below is a summary of diurnal variation in temperature and several key design considerations for a family shelter. small window will prevent thermal gain in high temperatures and heat loss in low temperatures materials with high thermal mass and added insulation thermal buffer zone warm room with stove seal openings to prevent draughts strong roof to cope with heavy snow loads dividing large rooms into several smaller rooms using plastic sheeting Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by clothes blankets clothes blankets shelter clothes blankets shelter mattress clothes blankets shelter mattress wind proofing clothes blankets shelter mattress wind proofing stove clothes blankets shelter mattress wind proofing stove flooring clothes blankets shelter mattress wind proofing stove flooring insulation Material planning should reflect priorities as temperatures drop the demand for shelter and household NFIs increases as temperature decreases if heating or appropriate shelter NFIs are not available, increase the distribution household NFIs, such as clothing and blankets and mattresses clothes Cold: NFIs Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by shelter NFIs may need protecting against the affects of frost and damp during production shelter and household NFIs will need protection from the cold during storage and transportation heavy snow and ice is likely to make the transportation of materials more difficult Cold climates may cause problems in the production, transportation and storage of NFIs Cold: NFIs Transitional Settlement: Displaced Populations (Corsellis and Vitale, 2005)

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Key point Group 5 key point: locations at altitude

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Air temperature in any of the climatic zones will drop in accordance with increased altitude or wind strength Temperature by altitude* Temperature by wind-chill* Altitude (metres) Air temp (Celsius) Sea level Wind speed (km/hour) Zero C drops to 15 kph kph kph kph- 9 * The above data is approximate and may vary across zones Altitude: diurnal temperature & shelter

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Altitude: NFIs Altitude affects both which NFIs should be distributed and the methods of distribution: seasonal accessibility distribution of a wider range of NFIs and greater quantities of fuel, as more altitude requires more fuel need to choose sheltering responses which are adequate to both very cold and hot climates

Shelter Training 08b – Belgium, 16 th –18 th November, 2008 based on content developed by Bibliography ‘Transitional Settlement: Displaced Populations’ (Corsellis and Vitale, 2005) ‘Handbook for Emergencies’ (UNHCR, 2007) ‘Humanitarian Charter and Minimum Standards for Disaster Response’ (The Sphere Project, 2004) ‘Shelter Sector Items’ (IASC ESC, 2009 forthcoming)