Backflow Preventor

(4) The Contractor V may install the cross-connection backflow prevention device as defined in this chapter on new installations. The retrofitting of a backflow device on an existing fire protection system will cause a reduction in available water pressure and probable system malfunction. The development of aboveground fire protection system hydraulic calculations is a task of the Contractor I and II, as defined in this chapter. Accordingly, a Contractor V is expressly prohibited from retrofitting cross-connection backflow prevention devices on an existing fire protection system, and only a Contractor I or Contractor II who is tasked to recalculate the system and take corrective actions to ensure that the system will function with the available water supply may retroactively install these backflow devices on existing fire protection systems. History.—ss. 32, 40, ch ; s. 9, ch ; s. 4, ch ; s. 29, ch ; s. 94, ch

Exemptions; farm outbuildings; standpipe systems installed by plumbing contractors.— (1) This act does not apply to owners of property who are building or improving farm outbuildings. (2) A licensed plumbing contractor is not required to be certified under this act to install standpipe systems and the following items connected thereto: overhead and underground water mains, fire hydrants and hydrant mains, hose connections, tanks and pumps; including sprinkler heads in trash chutes and in trash rooms, having no connection to an automatic sprinkler. History.—s. 19, ch ; s. 3, ch ; s. 1, ch ; s. 1, ch ; s. 8, ch ; s. 5, ch ; s. 2, ch ; s. 3, ch ; ss. 1, 2, ch ; s. 4, ch

Definitions.—As used in this chapter: (1) “Board” means the Florida Fire Safety Board. (2) “Certificate” means a certificate of competency issued by the State Fire Marshal. (3) “Certification” means the act of obtaining or holding a certificate of competency from the State Fire Marshal. (4) “Contracting” means engaging in business as a contractor. (5)(a) “Contractor I” means a contractor whose business includes the execution of contracts requiring the ability to lay out, fabricate, install, inspect, alter, repair, and service all types of fire protection systems, excluding preengineered systems. (b) “Contractor II” means a contractor whose business is limited to the execution of contracts requiring the ability to lay out, fabricate, install, inspect, alter, repair, and service water sprinkler systems, water spray systems, foam- water sprinkler systems, foam-water spray systems, standpipes, combination standpipes and sprinkler risers, all piping that is an integral part of the system beginning at the point of service as defined in this section, sprinkler tank heaters, air lines, thermal systems used in connection with sprinklers, and tanks and pumps connected thereto, excluding preengineered systems. (c) “Contractor III” means a contractor whose business is limited to the execution of contracts requiring the ability to fabricate, install, inspect, alter, repair, and service CO2 systems, foam extinguishing systems, dry chemical systems, and Halon and other chemical systems, excluding preengineered systems. (d) “Contractor IV” means a contractor whose business is limited to the execution of contracts requiring the ability to lay out, fabricate, install, inspect, alter, repair, and service automatic fire sprinkler systems for detached one- family dwellings, detached two-family dwellings, and mobile homes, excluding preengineered systems and excluding single-family homes in cluster units, such as apartments, condominiums, and assisted living facilities or any building that is connected to other dwellings. (e) “Contractor V” means a contractor whose business is limited to the execution of contracts requiring the ability to fabricate, install, inspect, alter, repair, and service the underground piping for a fire protection system using water as the extinguishing agent beginning at the point of service as defined in this act and ending no more than 1 foot above the finished floor.

Inspection Tags

Double Detector Check Assembly

Double Check Assembly

Reduce Pressure Zone Backflow

Domestic – No Meter Assembly

Backflow Tester