The purpose of the systematic HSE work is to ensure that problems are detected and taken care of in time before any unwanted events occur. HSE applies.

Slides:

Advertisements

Similar presentations

Work at Height Regulations 2005

Advertisements

Safety In The Workplace CREATED BY: CHELSEA JEAN.

ADMINISTRATION REVISION – BLOCK 2 HEALTH AND SAFETY.

April 23/14. Ursa Major SAFETY HEALTH & ENVIRONMENT April 6:00 Previous 24 Hours Total to Date First Aid Record. Injury TURNAROUNDS & MAJORS TURNAROUNDS.

Task 2 Describe the importance of good housekeeping arrangements (such as cleaning down work surfaces; putting storage devices, manuals and unwanted items.

Working at Height Learning Lite Module. Why do we need to understand the risks? In 2008/09 there were 35 fatalities, 4654 major injuries and a further.

Climbing the Ladder to Safety

Working at Height Regulations Statistics 2003 / 2004 (HSE) 67 Fatalities 3,884 major injuries (2/3 of which were falls from below 2 metres.

Working at Height Presented by Nic Carstens Health and Safety Officer Tel:

Accidents and Accident Reporting

Understanding the management of risks to health and safety on the premises of a retail business Unit 352.

Topic 4 - Risk Assessment Textbook pages 72–77. Learning outcomes By the end of the topic learners will have: Greater familiarity with risk assessment.

Hazard Identification, Risk Assessment and Risk Control

Behavioural Safety Working At Height.

Safety and Loss Control

HEALTH AND SAFETY AT WORK ACT (HASWA). What does it do ? HASWA is there to secure the health and safety of people at work. HASWA is there to secure the.

Welcome Port of Milford Haven Port’s Contractor Engagement Event 17 th March 2015.

Risk Assessments By Shenika Dillon. What is a risk assessment and why are they carried out ? A risk assessment is a systematic method in which a employer.

Health, Safety and Environmental Update July 2015 Purpose: The intention of this briefing is to pull together and share both Optimise and other contractor.

Greenhouse Safety Unit 1. Greenhouse Safety The nature of the work in a greenhouse can lead to personal injury. Workers should be made aware of the hazards.

Occupational health and safety

Legislation and responsibilities.  Employers must safeguard, so far as is reasonably practicable, the health, safety and welfare of their employees and.

ACCIDENT INVESTIGATION. Accident Investigation An Employer should immediately investigate the cause of any accident or other incident that : çresulted.

Personal Safety. Working alone Many people in remote places have to work alone. A person is alone at work when they can't be seen or heard by another.

Safety and PV Module 16 Fall Working Safely with PV Common Sense aspects: –Cluttered workspace leads to tripping –Working on sloped roofs, secure.

Health & Safety at Work Cameron Dearden & Sinéad Watt.

HEALTH & SAFETY – LONE WORKING

………………………………………………………  Safety For Workplace To : dana adas From : Fadi Mousa.

Worker Focused Safety Program Violence in the Workplace Worker Training Module 5.

What you will learn in this session 1.Sources of information about health & safety, including national legislation or guidance and local policies 2.Work.

Health & Safety At Work.

Safety Course Think, Talk, and Walk Safety Be Safety Conscious at Home, Work, Everywhere! Mr. Sherpinsky’s Safety First Presentation Council Rock High.

© Copyright 2011 by the National Restaurant Association Educational Foundation (NRAEF) and published by Pearson Education, Inc. All rights reserved. Chapter.

UNIT 27: UNDERSTANDING HEALTH AND SAFETY IN THE BUSINESS WORKPLACE

Periodic Review of JHA Reviewing job hazard analysis ensures that it remains current and continues to prevent accidents and injuries. It is possible that.

Your Safety Attitude A good attitude toward safety is a key to preventing unnecessary incidents and injuries. Your attitude affects your safety and the.

Safe Learning in the Workplace – Unit 413. Learning Objectives By the end of the end of the session you will: 1.State why health and safety legislation.

Job Safety Analysis.

Falls From Height. Identifying fall hazards Falls are a major cause of workplace fatalities and serious injuries. There are many jobs that require people.

Health, Safety and Environmental Update November 2015 Purpose: The intention of this briefing is to pull together and share both Optimise and other contractor.

Safety Induction to the Lift & Escalator Industry Part 10 - Accident Reporting and Part 10 - Accident Reporting andRecording.

QCF Diploma Health and Social Care Health and Safety Part 5.

2.7 Risk Management Otama Adventure 3 Credits. 3 Aims for the unit 1. Life Long Learners: Informed decision makers To be aware of risks in outdoor settings.

Health and Safety Act 2004 sets out broad responsibilities for employers’, employees and others whilst at their place of work. Every person at the place.

Making Decisions. The act of making a choice or coming to a solution that can affect: – Your health and well-being – Someone else’s health or well-being.

1Fall FALL PROTECTION. 2Fall CONTENTS  Introduction  Purpose  Same Level Falls  Lower Level Falls  Fall Prevention  Summary.

Objectives By the end of this presentation you will know: What risk assessment is; Where the need for risk assessment comes from; and The principles behind.

Health & Safety in the Construction Industry

Valley City State University Policies and procedures for reporting incidents that occur on campus or while working for VCSU and the State of North Dakota.

HCS  Employer  A person who employs one or more workers, or a person who is self-employed  Worker  Any person working at ajob  Imminent Danger.

Gasunie is one of the biggest gas infrastructure companies in Europe. Within the company, we give safety the highest priority; it forms the basis of our.

CONSTRUCTION BASICS STAYING SAFE ON SITE By COLDROP.

Employee Safety Awareness Training. Welcome and Objectives Welcome to this web-based training about workplace safety. This course will:  Provide information.

Safe Learning in the Workplace – Unit 413

Warehousing and Storage Principles Session 11 – Health, Safety and Legislation Day 6 / AM.

RISK ASSESSMENT AND CONTROL CHCWHS312A 1. RISK ASSESSMENT When a hazard is identified then a risk assessment must be made to see if the hazard can be.

What you will learn in this session 1.Sources of information about health & safety, including national legislation or guidance and local policies 2.Work.

SLIPS, TRIPS AND FALLS: On The Job Safety Basics

Section 11.2 Safety on the Job

Investigation Procedures

Behavioural Safety Working At Height.

SLIPS AND TRIPS AT WORK Introduction

Unsafe personal conduct affecting the work of administrators

Understanding of Health and Safety

Health and Safety Staff meeting 9/7/18.

Click to start.

Working at Height.

Safety on the Job Chapter 11 5/28/2019.

Presentation transcript:

The purpose of the systematic HSE work is to ensure that problems are detected and taken care of in time before any unwanted events occur. HSE applies to the safety of our employees and that is where our focus should be. Solutions you come forward with shall contribute to preventing problems related to working environment, health and lifestyle. Focus on Health, Safety and Environment helps to increase company value. Why is focus on Health, Safety and Security important for us in Subshore?

HSE activities or the internal control shall ensure: good working environment and safety, prevention of health or environmental disturbances. This means focusing on the following items : - Risk Analysis - Deviation handling and registering Subshore HSE vision is as follows: Zero injuries and loss to the people, materials and environment. Health, Safety and Environment

Risk analysis shall prepare an employee for what can happen in work operations. Motto: THINK first, then CARRY OUT It is important that YOU think through: - what should you do - how to do it - what do you need to do the job - who will work with you - how to secure the workplace, above, under and next to where the work shall take place. There are many who may be affected by work operations therefore it is important to THINK through work instructions first. Risk Analysis

FOCUS: Falling objects WHAT can happen: Dropped tools, scaffolding components. Damage to the material equipment and people who stay under/by the scaffold. HOW to avoid: Secure, barrier-off areas of work/building of scaffolding. Secure all tools with safety line to your work belt. Tidiness around the workspace. Avoid unsecured components at workspace. If you lose a tool weighing 2.12 kg, it will weigh much more when it falls straight down = 16m can be fatal to those who could be striked by it. Think first, then carry out

Deviations shall identify situations that may lead to the unwanted event. Submitting the deviation shall lead to changes in the procedures to prevent this from happening again. The challenge is to get employees to report deviations. Deviation / Report Unwanted Event Deviation Handling is the foundation to our HSE vision: Zero injuries and loss to the people, materials and environment What shall Subshore do to encourage employees to understand the importance of providing deviations reports and focus on safety of their own and others?

Have you ever said: "I will only..." When working with a task it is often that you come to a conclusion that "I will only.." Such situations are common reasons why incidents happen and people get injured. When you think "I will only"; take 2 minutes extra, think through what to do and look around. It regards YOUR own, and your colleagues' safety.

A tidy workplace ensures that you will find what you need, do not trip over wires / equipment and that you will spend less searching for things. Cluttered surfaces can create dangerous situations to those who are moving in the area. It is also important to have a tidy workspace in case you must evacuate. Make sure you always clean up after yourself and put things in place where they belong. Tidiness

All persons working at heights shall have safety and fall protection equipment. When working with loose items such as tools, you shall always secure them. Those who have tool belts shall at all times have tools on safety lines and attached to the belt. Loose objects can trigger dangerous situations if you work at heights. Falling objects can cause serious injury to personnel and equipment. Securing yourself and your tools

It is important to have good HSE attitudes, for you as an employee and for us as an employer. Together we will ensure the safety of ourselves and those we work with. Good HSE attitudes lead to good HSE figures which again lead to more exciting and challenging projects. Good attitude

A deviation shall always be thought through. The goal is that it should never happen again. What if you do not report a deviation and next time in the same situation someone else than your, a colleague of yours gets seriously injured? Would not it be nice if you had taken 2 minutes to deliver the deviation report so that it was registered and improvements were implemented? We have many good colleagues, but none to lose. Why report the deviations?