europac_PRO.pptFolie 1 Martin TrautTag: 5/2/2015 Subrack history at Schroff  europac rational  europac lab  europac mobile  europac special  europac lab HF europac PRO Subrack system

europac_PRO.pptFolie 2 Martin TrautTag: 5/2/2015 europac PRO subrack system  Market requirements: availablity conform to all existing standards easy handling stability EMV- concept included high features / low price

europac_PRO.pptFolie 3 Martin TrautTag: 5/2/2015 Prinzipal construction: A.) horzontal rails D B C D.) EMV-accessories C.) guide rails B.) side panels A europac PRO

europac_PRO.pptFolie 4 Martin TrautTag: 5/2/2015 A.) Horizontal rails Light-version with 1-hole fixing (1) => cost reduction Heavy-duty-version with 2-hole fixing (2) europac PRO

europac_PRO.pptFolie 5 Martin TrautTag: 5/2/2015 A.) Horizontal rails Surface anodized with conductive areas Centering of the rail with special screw (torx head) => exact locking piston Marking of the mounting position by labelling every 2HP europac PRO

europac_PRO.pptFolie 6 Martin TrautTag: 5/2/2015 B.) side panels  F = Flexible: for a variable postioning of the 19“ brackets H L F  H = Heavy-duty: for high shock and vibration requirements L = Light: standard version with integrated bracket => 3 versions available europac PRO

europac_PRO.pptFolie 7 Martin TrautTag: 5/2/2015 B.) side panels  F = Flexibel Variable positioning of the brackets for eg. recessed mounting possible  old product „europac lab“ europac PRO

europac_PRO.pptFolie 8 Martin TrautTag: 5/2/2015 B.) side panels  L = Light Standard version with integrated brackets  old product „europac rational“  Most economical version  Side panel and brackets- out of one L-shaped bended sheet of aluminium europac PRO

europac_PRO.pptFolie 9 Martin TrautTag: 5/2/2015 B.) side panels  H = Heavy duty for high shock and vibration requirements eg. for use in trains  old product „europac mobile“  Additional stability by several tox clinchings between the side panel and the 19“ bracket europac PRO

europac_PRO.pptFolie 10 Martin TrautTag: 5/2/2015 C.) guide rails Large inlet funnel for easy assembly of boards (1) Easy, exact positioning in the subrack (Window) (2) ESD clip for contact of the PIU (4) Optional bolt-on protection against shock / vibration(3) europac PRO Market requirements Easy assembly of the PIU =>

europac_PRO.pptFolie 11 Martin TrautTag: 5/2/2015 C.) guide rails Very sturdy clip-in geometry disassembly possible by unlocking the notch lever The use of the guide rails is also possible in 1,5mm sheet metal. Possibility to use in a sheet metal subrack europac PRO Schroff requirements

europac_PRO.pptFolie 12 Martin TrautTag: 5/2/2015 C.) guide rails - Solutions - 1.) for plug-in units 2.) for printed circuit board without front panel 3.) for plug-in units with injector/extractor handles according to IEEE / 11 4.) For boards with a height of 4,4“ (111,7mm) and drive units europac PRO

europac_PRO.pptFolie 13 Martin TrautTag: 5/2/2015 C.) guide rails For plug-in units head piece with a large inlet funnel for a groove width of 2,0 or 2,5mm guide rails one-piece/multipart guide rail extra sturdy europac PRO

europac_PRO.pptFolie 14 Martin TrautTag: 5/2/2015 C.) guide rails For board retainer and injector/extractor handle automatic board retainer no need for manual opening injector/ectractor handle with integrated assembly pin europac PRO

europac_PRO.pptFolie 15 Martin TrautTag: 5/2/2015 C.) guide rails For injector/extractor handle according to IEEE / 11 coding prevents the use of PIU´s in improper pin positions ESD clip for alignment pin usable with IEL, IES and IET handles europac PRO

europac_PRO.pptFolie 16 Martin TrautTag: 5/2/2015 C.) guide rails For boards with a height of 4,4“ (111,7mm) and drive units (3,5“ /5 1/4“) multipart guide rail (1 pair of head pieces + 1 extrusion ) no ESD clip usable europac PRO

europac_PRO.pptFolie 17 Martin TrautTag: 5/2/2015 D.) EMV-concept  Retrofittable shielding  According to the requirements of the customer Without changing existent parts europac PRO

europac_PRO.pptFolie 18 Martin TrautTag: 5/2/2015 D.) EMV-concept  3.) front panel and horizontal rail  2.) cover plate and side panel  5.) between horizontal rails  7.) backplane and side panel  1.) horizontal rail and cover plate europac PRO Shielding between:  4.) front panel and 19“ bracket  6.) front panel and side panel

europac_PRO.pptFolie 19 Martin TrautTag: 5/2/2015 D.) EMV-concept  Clip-on Rf-gaskets for contact between horizontal rail and cover plate Gasket to clip in horizontal rail groove Optimized protection of the gasket against damaging europac PRO

europac_PRO.pptFolie 20 Martin TrautTag: 5/2/2015 D.) EMV-concept  Clip-on RF-gasket for contact between horizontal rail and cover plate (a) / rear panel (b) Gasket to clip-in horizontal rail groove Optimized protection of the gasket against damaging. europac PRO

europac_PRO.pptFolie 21 Martin TrautTag: 5/2/2015 D.) EMV-concept  Clip-on RF-gasket for contact between front panel and horizontal rail Mounting bracket and front panel Front panels: surface frontage anodized, backside chromated europac PRO

europac_PRO.pptFolie 22 Martin TrautTag: 5/2/2015 D.) EMV-concept  Flexible contact and fixing between cover and side panel Gasket with integrated bolt-on possibilities All rail positions possible europac PRO

europac_PRO.pptFolie 23 Martin TrautTag: 5/2/2015 D.) EMV-concept  Vertical backplane shielding Profile is assembled to the side panel Contacts backplane on the connector side europac PRO

europac_PRO.pptFolie 24 Martin TrautTag: 5/2/2015 D.) EMV-concept  Horizontal board mounting completely shielded horizontal subracks shielding to vertical subracks europac PRO

europac_PRO.pptFolie 25 Martin TrautTag: 5/2/2015 europac PRO Compatible to international standards IEC , IEC 1587V1, DB Norm BN 41102, IEEE /11 Modular subrack concept Upgrade of EMV shielding Cost oriented construction High qualtity level 10 patents applications  Future oriented Summary: