Presents…

Syntech’s range of sewer cleaning equipment…

Syntech Engineers is a Singapore based company that manufactures a wide range of Sewer Cleaning products. Among them are: Vacuum Tankers Sewer Jetters Combination Machine

Vacuum Tankers Our range of vacuum tankers ranges from 1,500 to 15,000 litres. In addition, the vacuum suction rate (free air capacity) of our vacuum pump ranges from 3,250 lpm to 133,000 lpm. Vacuum pumps, (vane, liquid ring and blower type) can be powered by truck transmission PTO, split shaft PTO or by separate engine. Transmission of power to the vacuum pump can be by means of direct coupling, by transmission belt or by hydrostatic drive.

Range of Vacuum Tankers 1.SM ,600 lit 2.SM ,000 lit 3.SM ,400 lit 4.SM ,000 lit 5.SM ,000 lit ModelTank Capacity

SM Tank Capacity:1,600 lit Pump Type:Vane pump Capacity:3250 lpm System Weight:700 Kg

SM Tank Capacity:3,500 lit Pump Type:Vane pump Capacity:7000 lpm System Weight:1400 Kg

SM Tank Capacity:5,500 lit Pump Type:Vane pump Capacity:9000 lpm System Weight:1950 Kg

SM Tank Capacity:10,000 lit Pump Type:Vane pump /Liquid Ring Capacity:9,000 to 15,000 lpm System Weight:2,400 to 2,600 Kg

SM Tank Capacity:15,000 lit Pump Type:Vane pump /Liquid Ring Capacity:15,500 to 40,000 lpm System Weight:3,200 to 3,500 Kg

Vane Type Vacuum Pumps

Hydraulic Tank Tipping Hydraulic Rear Door Suction Hose-reel Dial Gauge Indicator

Sewer Jetters Our range of sewer jetters ranges from a flow rate of 30 lpm to as high as 423 lpm. Pressure ranges from 100 bar to 300 bar. High pressure water pump can be powered by truck transmission PTO, split shaft PTO or by separate engine. Transmission of power to the vacuum pump can be by means of direct coupling, by transmission belt or by hydrostatic drive.

Range of Sewer Jetters We do not produce specific model for sewer jetters at the present moment. All jetters produced are based on customers’ specifications. The reason is that the range of possible supply is so wide we are unable to satisfy most of our customers’ needs if we narrow down specific models. The range of requirements are as follows: 1.Pump flow rate and pressure 2.Size of water tank 3.Material of water tank – i.e. steel, fiber glass or polyurethane? 4.Drive mechanism – separate engine or truck engine? 5.System configuration – truck mounted, van mounted, skid mounted, trailer mounted?

Range of Sewer Jetters Truck-mounted Jetter Van-mounted Jetter Skid-mounted Jetter

Combination Unit Our range of Combination Units is also quite diversified. They are as follows: 1.Combination Unit without recycling 2.Combination Unit with recycling 3.Combination Unit without boom 4.Combination Unit with boom (manual/hydraulic) However we do have a standard model in which we had already produced many units in the past. The model is our MSC 13

MSC -13 Debris Tank :6.5 cu m Water Tank :6 cu m Vacuum Pump:83,000 lpm Water Pump:263 lpm at 155 bar Recycling System:270 lpm Hydraulic System:Rear Door, Tipping, Hose- reel, Suction Boom