1. Dennis Fire Appliances Operations & use

2. PTO Step 1 Move slide cover towards the drivers seat to lock out the gearbox Step 2 Select drive on the gear selector to engage the pump drive Step 3 Move the leaver back to engage the pump bay throttle control Step 4 The warning light should now show To disengage the PTO reverse the order

3. Water pump Pump drain taps For winter draining to prevent pump frost damage Supply valve for High Pressure hose reels Shut off valve for Nearside High Pressure hose reel. Select ‘Foam’ or ‘Water’ (to be closed when not in use) Main water tank to pump Shut off valve Engine speed control. Shut off valve for Offside High Pressure hose reel. Select ‘Foam’ or ‘Water’ (to be closed when not in use) Suction fill coupling Please note filters must be used on open water. Hydrant fill to water tank Low pressure deliveries

4. Low pressure water Open main water tank to pump Shut off valve Open Low pressure delivery valve as required

5. High pressure water Open supply valve for High Pressure hose reels Shut off valve for Nearside High Pressure hose reel. Select ‘Foam’ or ‘Water’ Shut off valve for Offside High Pressure hose reel. Select ‘Foam’ or ‘Water’ Open main water tank to pump Shut off valve

6. Generator Step 1 Move slide cover towards the drivers seat Step 2 Move the leaver back to engage the pump bay throttle control Step 3 The warning light should now show Step 4 Turn on the generator switch

7. Light mast These controls are found in the passengers side front locker DO NOT move the vehicle with the mast raised Rotate the valve to ‘Raise’ Press & hold the raise button until the light mast is fully raised. Rotate the valve to ‘Lower’ to stow the mast Raise the engine speed in the pump bay to maintain voltage output