Reader Swap out Guide.

Slides:

Advertisements

Similar presentations

Instructional Presentation

Advertisements

Levolors New Size-In-Store Blind Cutting Machine.

Build Your Own Future RC2 Serviceability. Build Your Own Future Safety and Ground Rules Before servicing, always remove A/C power from the unit and disconnect.

Titel des Vortrages 01/2007 The following slides explain the commissioning of a FRONIUS IG inverter. Please note that each slide is provided with sound.

DS1000B-RM/ DS1500B-RM Battery Replacement Procedure.

Optical Manufacturing Solutions 1 Probe Assembly.

Installation. Indoor Unit Installation Typical Installation.

Installation Quick Guide AD400 Cylindrical 6/01/13 Doc #

1 STEPMILL 7000 PT ASSEMBLY INSTRUCTIONS PART NUMBER

（ 1 ） PROCEDURE FOR FLAT HEAT PRESS OPERATION PROCEDURE FOR MULTI FUNCTION HEAT PRESS MACHINE.

ES1000C/1500C Battery Replacement Procedure. 1.Pull off the front panel.

Memory Craft Feed Dog Drop Step Motor Adjustments.

Dishwasher Rework. Identify Unit Disconnect Power Turn off Breaker… … or unplug power cord.

Slide title In CAPITALS 50 pt Slide subtitle 32 pt G3X Series Fixed Wireless Terminals for GSM/EDGE Networks.

L2000 Technical Training 6. Assemble/Disassemble.

Universal Holding Cabinet Two screws hold each side; four screws secure the top.

We Design Innovative Bus Interiors LED Retrofit Systems Designed ForPretoria Hadley/Transmatic L-20 and Hadley/Transmatic L-20 Fluorescent Aisle Lighting.

2008 Cadillac CTS With Original Antenna

1 © 2011 Profile Recorder for ProtoFlow S Installation Instruction.

American Electrical, Inc. Junction Box / Hookup Box Fast and easy way to make electrical connections An assembled kit – no need to procure and assemble.

Installation. Indoor Unit Installation Typical Installation.

TP4-ENERSOL-TD/PV double function

1 66 blocks are prevalent in the telecommunications industry Today they are used primarily for phone applications only 66 blocks are prevalent in the telecommunications.

MC11000 Kit Replacement 1 1. Open the face plate and remove the 2 screws. Remove and discard the original face plate. 3. Remove the 2 white caps on the.

Installation. Indoor Unit Installation Typical Installation.

Procedure of Connecting Coil Unit In series with Capacitor 10 April 14 Product: Fully Automatic Washing Machine.

AR4702 (cover plate replacement) Remove existing cover plate by removing the 2 x screws fixed through the top of the plate into the chassis (Phillips screw.

BIX In-Building Cross Connect system BIX Installation Guide ELCM 254 Updated December 2013 gmail.com 1 Most of the images and some text for.

PS500B/800B Battery Replacement Procedure. 1.Remove the two screws at the bottom of the front panel. 2.Push down then remove the front panel.

PS1500B Battery Replacement Procedure. 1.Pull off the front panel.

CLM Maintenance. Covers : 1 - Side cover, 2 - Back cover, 3 Top cover, 4 - Lamp door, 5 - Side cover input and communication side, 6 - HEPA dust filter,

Compressor Replacement – ODU

Tools you will need #8 Torx driver #10 Torx driver Standard Phillips screwdriver Small (jewelers)Phillips screwdriver Small standard screwdriver.

HARDWARE – HALO RDDK 5 th Feb 2015.

Adding to your Diagnostic Station Adding thermometry The temperature module attaches to the top of the BP module. It is made up of the following two.

PS2200B/3000B Battery Replacement Procedure. 1.Disconnect the wire connecting the UPS and the battery pack. 2.Pull off the battery pack front panel.

Remove 4 Phillips screws that hold tape drive cover (2 on each side) Phillips screws.

Replacing the Main Monitor 1.Open Lower Main Door, and turn off machine power 2.Open the upper main door 3.Disconnect the video and power plugs from the.

ELLIPTICAL HEAD PROTECTING COVER 01_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD.

T. Hajer Brahim & T. Rania Alakazalah U.Y: 1435/1436 H.

Automation and Drives A&D SD Customer Service & Support A&D SD CST 20/11/04 1 of 13 10A Control Board Exchange.ppt Introduction Procedure Setting up Exchanging.

Installing Branch Circuits Unit #32. What are Wiring Boxes? hold cable or conduit and protect connections attached to building contain all electrical.

To install the four wires from the back of the coil machine, loosen the four knobs. Keep each wire in center under each knob, off to the side will allow.

Maintenance of, or to Change a faulty MCB (motor control board) 2010 models onwards.

PostBase Automatic Feeder Component Removal Service Training

Activity 4.2.8a Satellite Flight Satellite Robot Construction Guide

Scorpion is a remote tester specifically designed for testing ASD systems. Scorpion is compatible with the FAAST aspirating smoke detector. It is particularly.

INSTALLING BYRNE POWER BOX INTO FLEX SYSTEM

X-Spot Lamp Socket Replacement Procedure

Installing an Xbox 360.

LCD Splicing Screens Wall-mounted Guide

SWITCHES W. C. “Buster” Hounshell Spring 2002.

BIX In-Building Cross Connect system

Most Effective Methods to Replace a Brake Light Switch.

T400 Motor Replacement.

6. Disassembly & Reassembly

Front panel wiring PICO 155

5 pcs ,fasten the tray, please pay attention ,

המחשב הנייד ערך והכין: אלי סומר.

To install the four wires from the back of the coil machine, loosen the four knobs. Insert each of the four wires from the side under the knobs. Keep each.

Activity 4.2.8a Satellite Flight Satellite Robot Construction Guide

Removes these two screws that attach the Controller to the Hopper Box.

How to Perform Preventive Maintenance of the Personal Computer

Step 1：Disassemble battery case

5 pcs ,fasten the tray Screw 1 and 2 are the same. 1 for the body and tray, 2 for body and cover, 3 for body and columns.

Step 1：Disassemble battery case

Step 1：Disassemble battery case

Step 1：Disassemble battery case

847(B) PDB Uninstallation guide

Fix your Fireplace SYM-B Series.

Presentation transcript:

Reader Swap out Guide

INSTALLATION 2 3 1 4 Hang Reader Terminate Connections Wall Plate The reader hooks onto the wall plate at the top and is secured at the bottom using one screw on each side 3 Terminate Connections Green connector block with 5 coloured wires. 1 Wall Plate 4 Fit Cover Cover is screwed in at the bottom using 2 x machine screws

How the Reader is fixed to the Wall Plate Firstly remove the cover by taking out the screws at the bottom of the reader. Remove the green connector block and disconnect the wires from the block. Remove any ethernet cables. The reader is fixed to the wall bracket with 2 machine screws either side of the readers, remove these then push the reader upwards to take off the wall.