1. ELLIPTICAL HEAD PROTECTING COVER 01_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD

2. DISCONNECT THE VENT VALVE CABLE 02_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD

3. 03_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD TAKE OFF THE FRONT PART FROM THE PROTECTING COVER

4. CLOSE AIR PRESSURE VALVE ON VESSEL STAND 04_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD

5. DISCONNECT AIR PRESSURE WITH WRENCH 14 05_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD

6. 06_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD DISCONNECT VALVE CABLES

7. 07_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD DISCONNECT TUBE

8. 08_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD DISCONNECT ALL VALVE CABLES

9. M16 - WRENCH 24 09_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD ELLIPTICAL HEAD M16 - WRENCH 24 LIFTING BRACKET FLANGE FIXED SUPPORT

10. 10_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD REMOVE WITH WRENCH 24 THE M16 BOLDS

11. 11_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD USE LIFTING BRACKET WITH HOISTING BELT 10000 N

12. 12_INSTRUCTION DISCONNECTING THE ELLIPTICAL HEAD SLIDE THE ELLIPTCAL HEAD INTO THE SLOTS AND COVER THE VACUUM SIDE SAVE THE O-RING WITH A WIRE