Customer Presentation Sensor Series SC4 The New 4 mm C-Slot Sensor for Gripper and short stroke Cylinder Customer Presentation
Sensor ST6 2.0 - Produktdaten Product Data Function Magnetic cylinder sensor for detection of the piston position Cylinder slot 4 mm C-slot/sensor mounting Installation Any direction, mounting from above (drop-in) Switch output PNP, NPN Switching logic NO (normally open) Indicator Yellow LED Operating voltage 10 V to 30 V DC Temperature range –30°C to +80°C Protection class IP65, IP67 Material Housing: PA, glass-fiber reinforced Fitting: Stainless steel, nickel silver, brass
Sensor ST6 2.0 - Produktdaten Product Data Measuring principle GMR effect Reproducibility ≤ 0,1 mm (T const.) Cable material PUR Vibration resistance 10 to 55 Hz, 1 mm Shock resistance 30 g, 11 ms Wire break protection ü Protected against polarity reversal ü Short-circuit protected ü EMC According to EN 60947-5-2 Certificates cULus, CE
Sensor SC4 - Overview Sensor-element Funktion indicator LED Mounting screws Switching point Any mounting position
Sensor SC4 - Drop-In assembly Advantages of the new design (drop-in assembly) Just insert it and fasten it quickly Eccentric screw Stainless steel screw Captive screw Fixing via quarter turn
Sensor SC4 - Dimensions 1 2 PNP/NPN Dimensions in mm LED indicator Encapsulation translucent PNP/NPN 2 Switching point Dimensions in mm LED indicator Mounting screw
Sensor SC4 - Product versions Connenction types PUR cable, 3-pin PUR / PVC cable with M8x1, 3-pin, knurled screw
Sensor SC4 - Application options Mini slide MSN, MSC series Short-stroke, compact, double piston and guide cylinders series SSI, GPC, TWC Parallel grippers, UPG series Cylinders PRA series
Sensor SC4 - Variants PNP/NPN Type Part no. Wire Material Port Cable Wire end M8 plug M8 plug/knurled screws M12 plug/knurled screws PUR 0.3 0.5 3 5 PNP R412026162 PA 30 R412026163 R412026164 R412026165 NPN R412026166 R412026167
Sensor SC4 - Strengths and your advantages at a glance Extremely short, robust housing – glass-fiber reinforced High-strength, flexurally rigid sensor housing Resistant to chemicals including cleaning agents and production chemicals Very short sensor housing enables use in short-stroke cylinders and grippers Excellent durability of the magnetic cylinder sensor GMR and ASIC technology for utmost precision Suppresses side lobes in the magnetic field Precise adjustment of switching width, five times more accurate than conventional cylinder sensors Dispersion less than 5% (market average: 25%) Maximum reliability on all drives Increases machine performance by guaranteeing precise switching and suppression of incorrect signals Switching point Drop-in mounting Quickly insert the sensor from above into the C-slot No removal of cylinder end caps required Captive screw Insert, fasten, ready! Easy, fast installation and exchange thanks to a innovative mounting concept Housing design and cable outlet Very short sensor housing designed for grippers Sensor with 90° cable outlet No installation restrictions Gripping section without annoying cables and thus give the operator all the necessary freedoms of movement. Hereby raising reliability, safety and operational cost effectiveness