1. Clean Line Valve System CL03 / CL03-XL
The valve system for wash-down applications

2. At a Glance Hygienic design (EHEDG-certified) Protection class: IP69k
Resistant to cleaning agents
Single valve, multipole-, field bus connection
Up to 32 pressure zones possible
Modularity in steps of 1
Flow 850 – 1100 NL/min (combinable)
Dual pressure application
Vacuum application
Sturdy HF03/03-valve
Pneumatic connections in metric & inch
Online-Configurator

3. Modular Concept 1 to 16 valves in one valve system
Up to 18 valves at CL03-XL by parallel actuation
Extendendable in steps of 1
Exchange of valves without disassembling of valve system
Tie rod principle
Pilot air supply can be selected
Field bus und multipole connection exchangeable
Pilot air setting
Internal out of channel 1
Internal out of channel 5
External
Tie rod
Extendable in steps of 1
Base plate is modular
2 ports (2,4)
4 ports (2,3,4,5)
5 ports (1,2,3,4,5)
Universal interface
For multipole connection
For field bus
Channel seperation
Up to 32 pressure zones

4. Hygienic Design
Valve cover
Polyamide 12
Fiberglass reinforced
Screws and threat
Stainless steel
All exterior metal parts
The Design of CL03 corresponds to the specifications of EHDG
EHEDG-certified
Materials
resistant to cleaning agent
e.g.: caustic soda, phosphoric acid, sodium
Well mechanical properties
Low hydroscopicity
Manuel override
Protected by cover
Seals
HNBR
Visual seal
between base plate
Base plate and end plate
Polyamide 12
Fiberglass reinforced
Visual seal
between valve cover and base plate

5. CL03 with Field bus and HF02/03 Valves
Field bus coupler
Profinet
Ethernet IP
Profibus
CanOpen
Device Net
CL03-XL-Valve
HF02-Valve
1100 NL/min
Additional supply (1,3,5)
CL03-Valve
HF03-Ventil
850 NL/min
Additional supply (3,5)

6. CL03-Singel-Valve with HF02/03 Valves
Screws and threats
Stainless steel
All exterior metal parts
LED-Indication
Yellow LED for actuation status
Electrical connection
M12x1
Stainless steel
Seals
between base plate and cover
Base plate and valve cover
Polyamide 12
Fiberglass reinforced
CL03-Valve
HF03-Ventil
850 NL/min
Valve function: 5/2, 5/3, 2x 3/2
Manual override turn/detend (covered)
Thread connection
G1/8 / M5

7. Protection Class IP69K
The object, in this case the valve terminal system CL03, is sprayed with water of high pressure. The test requires:
a water pressure of 100 bar
a flow of l/min
a water temperature of 80°C
sprayed from a distance of cm
The object rotates with a speed of 5 rpm. during the test and water is sprayed from 4 different angles (0°, 30°, 60° and 90°) in 30 sec. per angle
The acceptance conditions for IPX9K are fulfilled if water, sprayed with high pressure on the object from any angle, makes no harm to the object.

8. Technical Data Valve functions 5/2, 5/3cc, 2x3/2nc,no
Extension up to 16 (18) valves with up to 32 coils
Flow rate Qn max
CL03 with HF03 valves 850 l/min
CL03-XL with HF02 valves 1100 l/min
Working pressure – 10 bar
Control pressure 3 – 10 bar
Ambient temperature 0 – 50 °C
IP Protection IP69K
Power consumption 0,35 W
Voltage 24 VDC (-15 %/ +20 %)
Field bus protocols Profinet, Ethernet IP, Profibus DP, CANopen, DeviceNet

9. Pneumatic Connections
Internal / external pilot control via 1, 5 or X
Left end plate:
Air exhaust (3/5): G3/8 Air supply (1): G1/2 (Air supply also possible with 3 and 5)
Right end plate:
Air supply (1): G1/2 Pilot control air exhaust (R): G1/8 Pilot control supply (X): G1/8
Base plate:
Connections (2/4): G1/4 (optionally available with a cartridge for a 5/16 inch hose) Optional: additional air supply over 3,5

10. Pneumatic Connections Single Valve3 1 4
R (pilot exhaust air)
Vent
(Ventilation)
Mounting thread
Mounting thread 2 5
X (always external pilot supply)

11. Pressure Zones
Creation of several pressure zones is possible by closing channels 1, 3, and 5 (every valve can be controlled with separate air supply)
Up to 32 different levels of pressure in one system (two different pressure levels in every valve)
Each valve can be provided with individual air supply
Channels sealed between the sub plates
Different pressure levels in connections 3 and 5

12. Dimensions M6 (2x in every
end plate and in every base plate with 4 connections
149
G3/8 90
G1/2
mm + no. of base plates x 30 mm
G1/4
(US, connection 5/16)
237.25mm + number of base plates x 30mm)
267.5 mm + number of base plates x 30 mm
G1/4
(US, connection 5/16)
169 42
G1/8
G1/2
78.5

13. Advantages and Customer Benefits
Modular building system
Modularity in steps of 1
Easy extension
Flexible
Electrical connection
D-SUB, field bus, single valve
Variable connectivity
Wide range of electrical connections
Hygienic design
Protection class IP69k
Sturdy HF02/03-valves
Optimal for food-applications
Washable, cleaning agent resistant
Reliable valve technology
AVENTICS Configurator
Product documentation
Complete documentation
Immediate availability