1. Q3X ■ Solves challenging contrast part-detection applications ■ Fast as 250 µs response speed able to capture up to 2,000 events per seconds ■ Angled three-digit display offers real time feedback Versatile, Rugged, Laser Contrast Sensor

2. Q3X Applications ■ Registration mark detection ■ Leading edge detection ■ High speed part detection ■ Small/thin features ■ Small contrast changes

3. Q3X Key Features ■ Solves challenging contrast part-detection applications ■ Fast as 250 µs response speed –Captures up to 2,000 events per second ■ Angled three-digit display – Easily viewed from multiple vantage points – Provides clear user feedback for easy setup ■ Bright output indicator ■ Intuitive setup utilizing two tactile buttons ■ Rugged nickel-plated zinc, laser-marked housing ■ Robust ambient light resistance

4. Features: User-Friendly Design with 3-Digit Display ■ Bright output indicator provides high visibility of sensor operation ■ Angled LED Display –3 digit, 7-segment display –Provides clear user feedback for easy setup –Easily viewed from multiple vantage points

5. Features: User-Friendly Design with 3-Digit Display ■ Real time display for easy setup and troubleshooting ■ LED Indicators –STB = Stability Indicator –Active TEACH Indicators  0 to 990 Range −Equivalent to 0-9.9 excess gain  Switches at 100  999 indicates saturation  Relative value Normalized Signal Strength (NSS) % Light Received Current Threshold NSS =

6. − Press and release (-), then press and hold (-) to decrease gain Press (-) to navigate the sensor menu + Press and release (+), then press and hold (+) to increase gain Navigate the sensor menu: press (+) MODE Enter Setup mode: press and hold (MODE) for 2+ seconds to enter setup mode Press and hold (MODE) to decrease numeric values TEACH Press and hold (TEACH) for 2+ seconds to start currently selected teach mode press and hold (TEACH) to increase numeric values ( - )(MODE) and (+)(TEACH) Press (-)(MODE) and (+)(TEACH) simultaneously to select items in setup mode Press (-)(MODE) and (+)(TEACH) simultaneously for 2+ seconds to select and save a parameter and return to run mode Features: Intuitive Set Up Via Push Buttons

7. Features: Construction Durable and Robust Construction ■ Withstands: –Mechanical impact –Over tightening –Extreme vibration Die Cast Zinc Housing ■ With: –IP67, IP68, IP69K rating –Chemically-resistant materials –Laser marked information

8. Features: Class 2 Laser Emitter ■ Visible beam for easy setup and alignment ■ Class 2 laser, 655 nm ■ Small Spot size –2.24 x 0.79 mm at 30 mm –1.52 x.055 mm at 150 mm –0.55 x 0.27 mm at 300 mm

9. Features: Inputs and Outputs ■ 10-30 V dc ■ Bipolar (PNP & NPN) output ■ Remote input (disabled by default) –Remote teach –Laser inhibit –Master/slave synchronization

10. Five Never Fail Teach Modes Teach Modes ■ Five teach modes available –Two-point teach (default) –Dynamic teach –Window set –Light set –Dark set Never Fail a Teach ■ Sensor will never fail a teach mode –Always sets a switch point –Example: In two-point teach mode, if both conditions are at the same signal level, the threshold will be set slightly below the two taught conditions –See manual for specific behaviors

11. Never Fail Teach Modes ■ Two Point Teach –The sensor centers the switch point between two taught conditions. ■ Dynamic Teach –Dynamic TEACH sets a single switching threshold during machine run conditions. at the optimum level. ■ Window Set –Window set sets a sensing window using the window offset percentage ■ Light Set –Light set sets a switching threshold a user-selectable percent offset below the presented condition. ■ Dark Set –Dark set sets a switching threshold a user-selectable percent offset above the presented condition.

12. Q3XTBLD-Q8 Specifications Sensing BeamVisible red Class 2 laser, 655 nmResponse Speeds250 µs, 1 ms, 5 ms Supply Voltage10 to 30 V dcIP RatingIP67, IP68, IP69K Sensing Range300 mm (11.81 in)Operating Conditions -10° C to 55° C 35-95% Relative Humidity OutputBipolar (1 PNP & 1 NPN) outputRepeatability60 µs Beam Spot Size2.24 x 0.79 mm @ 30 mm 1.52 x 0.55 mm @ 150 mm 0.55 x 0.27 mm @ 300 mm ConstructionHousing – Nickel-plated zinc die-cast, side cover –nickel-plated aluminum, Lens Cover – PMMA, Window – Polysulfone, Buttons – 316 stainless steel Certifications

13. Menu Map Sensor Menu – Top Menu  Output Operation  Teach Selection  Offset Percent  Response Speed  Delay Timer  Input Wire Function  Sensitivity  Display Read  Exit Setup  Reset to Factory Default

14. Q3X Models Available Now: Q3XTBLD-Q8

15. Accessories: Brackets SMBQ4X… NEW SMB18FA… SMB18A, $4 Universal bracket for Banner’s Q4X, QS18, & QS30 sensors

16. Accessories: Cordsets Standard Cordsets Washdown IP69K Cordsets – NEW Stainless Steel Coupling Nut

17. Q3X Resources: Sell Sheet & Technical Literature Quick Start Guide (pn 181486) ■ 8 pages ■ Basic set up and menu map diagrams ■ Included in box with product Sell Sheet (pn 183523) ■ 4 pages ■ Selling advantages, applications, and models ■ Electronic and print versions Manual (pn 181485) ■ 28 pages ■ Complete information on programming, performance, troubleshooting, dimensions and accessories ■ Online only

18. Sales Resources: Videos & Application Notes Videos ■ Product video ■ Lid detection ■ Demo video https://www.youtube.com/p laylist?list=PL7ma8- bsdD0duUQjP9SHqz- yDRoTLun2X Application Notes ■ High speed detection ■ Registration mark detection

19. Q3X Summary Key Points to Remember ■ Versatile, Rugged, Sensor –25-300 mm range –Contrast sensor –Robust, metal housing –Superior ambient light resistance –Angled 3-digit LCD Display –Easy to view output indicator –Intuitive setup via push buttons

20. Questions