Getting Started with Stature Doc #: FME002 Getting Started with Stature Document & Process Owner: Fluke Quality Group Rev: 005
Disclaimer This document contains confidential and proprietary information owned by Fortive and/or Fluke. Any disclosure, use, copying or distribution of this information without the express written consent of Fortive and/or Fluke is strictly prohibited. The following training material is provided as a generic guide and does not include all actions required by various regulatory, environmental or other agencies under which the site operates. It is the responsibility of the site leadership team to ensure compliance to those agencies. Facilitator Notes: Please inform the participants that this material is proprietary and should not be shared with others outside of Fortive without pre-written authorization. For improvement suggestions, please email FLK-Global-QualityGroup@fluke.com. FME002 Getting Started with Stature
Learning Objectives By the end of this segment, you will… Understand where to go for FMEA resources Log into Stature, Fluke’s FMEA software FME002 Getting Started with Stature
Where do I start? Sharepoint for Stature and FMEAs: http://fluke.intranet.danahertm.com/Manufacturing/Quality/Stature Documents/ 1 Training videos Stature training FMEA training Access STATURE here 2 FME002 Getting Started with Stature
Computer requirements Compatible with Windows 7 and Windows 10 (sorry not win8) Must use Internet Explorer 8 or 11 (Check here) Chrome / Firefox not supported FME002 Getting Started with Stature
Step 1: Open stature Click “link to stature production environment” to open Stature (Video walkthrough at Sharepoint -> Stature - training videos -> “01-Installing and opening Stature”) 1 FME002 Getting Started with Stature
Step 2: Login to Stature Login User name: Same one you use to login to Windows Password: welcome welcome FME002 Getting Started with Stature
You must click “Logout” DO NOT CLOSE THE WINDOW TO CLOSE STATURE!!! To Exit You must click “Logout” DO NOT CLOSE THE WINDOW TO CLOSE STATURE!!! We only have 6 concurrent licenses in production, if you don’t logout, it doesn’t free up the license Always Click Here NEVER Click Here FME002 Getting Started with Stature
Step3: Open a Study Open Groups and Folders -> Training Click on the first study labeled “_Check if Stature works by opening this study” 2 1 FME002 Getting Started with Stature
Step 4: Install Rich Client 3. Click: Install Stature Rich Client 4. Click: Run FME002 Getting Started with Stature
Step 4: Install Rich Client (cont) FME002 Getting Started with Stature
Step 5: Close Study After Rich Client install has finished Close the open study Don’t Click Here Click X to close FME002 Getting Started with Stature
Step 6: Open a Study Again Click on any study to open it After about 60 sec should see: 2 1 FME002 Getting Started with Stature
Next Actions Learn more about how to use Stature with FME003 Learn about FMEAs with FME004 Go do FMEAs as part of NPIs or sustainment! FME002 Getting Started with Stature
Troubleshooting Ensure that you are using a 32-bit version of Internet Explorer (IE). To verify, check the process name of IE in the Windows Task Manager. The process name should be iexplore*32.exe. The ‘*32’ in the name indicates that IE is run as a 32-bit process. Disable the Compatibility View in the browser. Disable the ActiveX filtering in IE. Click Tools and if a check mark is present on the ActiveX Filtering menu item, click to clear the check mark. b Set your browser security as follows: Click Tools > Internet Options. Click the Security tab. Click the Trusted sites security zone. Set the Security level for the trusted sites zone to “Medium-Low” Click the “Sites Button”, Uncheck the box: Require server verification (https:) for all sites in this zone, then add http://*.tektronix.net to the trusted zone. c e d FME002 Getting Started with Stature
Troubleshooting If you are using windows 8 or 8.1, please consider changing to Windows 7 or 10 If you have IE11, have you installed rich client? If you are using Chrome or Firefox, switch to IE If it doesn’t come up, contact FLK-Global-QualityGroup@fluke.com FME002 Getting Started with Stature
Contact: FLK-Global-QualityGroup@fluke.com Feedback This is a new process to Fluke and we need feedback for it to be successful What works? What doesn’t? How can we make the system work for you? Contact: FLK-Global-QualityGroup@fluke.com FME002 Getting Started with Stature
Yes, notification e-mail to be sent to all Stature users Rev history Revision Rev Date Rev Author Description of Change Training (Y/N)* 001 4/2/2015 I. Brown Initial release Yes, in class only 002 8/3/2015 Updated footers for Intelex release No 003 10/28/2015 Updated because IE 8 is no longer allowed on Fluke computers 004 1/7/2016 Updated to instructions for IE11 rich client install because stature now works with IE 11 Yes, notification e-mail to be sent to all Stature users 005 10/28/2016 Updated for new rich client installing, updated to Fluke template. FME002 Getting Started with Stature