Used for cutting wood and plastic Coping Saw Used for cutting wood and plastic

Used for marking straight lines on wood. Try Square Used for marking straight lines on wood.

Used for cutting straight lines on wood. Tenon Saw Used for cutting straight lines on wood.

Used to remove wood by carving it. Chisel Used to remove wood by carving it.

Used to smooth rough or sharp edges. File Used to smooth rough or sharp edges.

Used for holding and securing work. G-Clamp Used for holding and securing work.

Used to measure. More accurate than plastic rulers. Steel Rule Used to measure. More accurate than plastic rulers.

Used for drilling holes Pillar Drill Used for drilling holes

Used to cut wood and plastic. Fret Saw Used to cut wood and plastic.

Used to smooth surfaces. Belt Sander Used to smooth surfaces.

Used to cut straight lines in wood and plastic. Band Saw Used to cut straight lines in wood and plastic.

Used to cut card and paper. Craft Knife Used to cut card and paper.

Used to heat plastic for bending. Strip Heater Used to heat plastic for bending.

Used to cut straight lines. Junior Hack Saw Used to cut straight lines.

Used to smooth wood, plastic and metal. Sanding Block Used to smooth wood, plastic and metal.

Goggles Worn to protect eyes.

Hand Drill Used to drill holes.

Used for holding and securing work. Sash Clamp Used for holding and securing work.

Used to smooth wood or plane the thickness of wood. Wood Plane Used to smooth wood or plane the thickness of wood.

Used to mark an angle on wood Sliding Bevel Used to mark an angle on wood

Used to mark the centre of a hole to be drilled. Centre Punch Used to mark the centre of a hole to be drilled.

Used to cut a mortise and tenon joint. Mortising Machine Used to cut a mortise and tenon joint.

Used for holding and securing work. Vice Used for holding and securing work.

Used to join materials together. Glue Gun Used to join materials together.

Used to shape or mould thin plastic. Vacuum Former Used to shape or mould thin plastic.

Used to trim vacuum formed plastic. Profile Cutter Used to trim vacuum formed plastic.

Used to strike wood or drive chisels or dowels. Mallet Used to strike wood or drive chisels or dowels.

Used to strike and remove nails. Claw Hammer Used to strike and remove nails.

Pin Hammer Used to strike pins.

Used to smooth materials. Sand/Glass Paper Used to smooth materials.

Used to hold and cut small materials, e.g. wire. Long Nose Pliers Used to hold and cut small materials, e.g. wire.

Wire Cutters Used to cut wire.

Used to grip, twist, bend and cut cable and wire. Linesman Pliers Used to grip, twist, bend and cut cable and wire.

Used to melt solder to join pieces together. Soldering Iron Used to melt solder to join pieces together.

Used to drive heavy metal staples into wood, plastic or masonry. Staple Gun Used to drive heavy metal staples into wood, plastic or masonry.

Used to provide grip to turn objects. Spanner Used to provide grip to turn objects.

Screwdriver Used to turn screws.

Used to join metals with pop rivets. Pop Rivet Gun Used to join metals with pop rivets.

Drill Bit Come in a range of different thicknesses, allowing you to drill holes to a specific size.

Bradawl Used to make an indentation into wood in order to ease the insertion of a nail or screw.

A computer controlled machine that cuts letters and shapes. CNC Vinyl Cutter A computer controlled machine that cuts letters and shapes.

Spirit Level Used to indicate whether a surface is horizontal (level) or vertical (plumb).

Bench Hook Provides a stop against which the piece of wood being worked can be firmly held

Used to mark out lines for cutting. Marking Gauge Used to mark out lines for cutting.

A computer controlled machine used to cut wood, metal and plastic. CNC Router A computer controlled machine used to cut wood, metal and plastic.

Used to strip electrical insulation from electric wires. Wire Strippers Used to strip electrical insulation from electric wires.