We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byRonald Washington
Modified over 4 years ago
Tool Identification Tool Identification and Use as Photographed and Prepared by Doug Best
1. Adjustable Wrench
Turning various size nuts and bolts.
4. Ball Pein Hammer
2. Ball Pein Hammer Hammering metal.
Flaring top of hole for recessing head for flathead screw or bolt.
17. C Clamps
4. C Clamps Clamping two or more pieces of metal together.
5. Chalk Line Reel Marking straight lines. Contains chalk and string
6. Long Nose Pliers Reaching into recessed areas.
7. Circular Carbide Saw Blade Blade for use on portable circular saw.
8. Regular Socket General-purpose socket for turning nuts & bolts.
43. Drill Press Vise
10. Drill Press Vise Holding stock while drilling.
67. Hack Saw
11. Hack Saw Sawing metal.
12. Slip Joint Pliers Adjust for holding various size material.
92. Nail Hammer
13. Nail Hammer Driving nails.
93. Nail Set
14. Nail Set Countersinking nail heads Tapered shank and cupped point
15. Masonry Bit Nailing in concrete, brick, or block.
99. Pin Punch
16. Pin Punch Driving out metal pins Straight shank and blunt tip
111. Pipe Wrench
17. Pipe Wrench Turning and holding metal pipe
18.Combination Square Determining 45 & 90 degree angles.
115. Portable Circular Saw
19. Portable Circular Saw Sawing wood in construction projects
20. Combination Wrench Turning hex & square nuts & bolts.
137. Sledge Hammer
21. Sledge Hammer Heavy hammering
22. Groove Joint Pliers Gripping when greater pressure is needed.
23. Coping Saw Cutting curves & irregular cuts.
155. Tape Rule
24. Tape Rule Straight or curved measuring
25. Try Square 90 degree squaring.
26. Open End Wrench Turning square head nuts & bolts.
27. Level Leveling & plumbing.
28. Portable Jig Saw Making irregular cuts.
29. Portable Electric Drill Drilling holes with an external source of electricity.
30. Straight Shank Drill Bit Drilling metal.
31. Speed Bore Bit Wood-boring bit for electric drill.
By: Johnny M. Jessup Agriculture Instructor/FFA Advisor
Objective Define tools and materials used in agricultural engineering careers.
ADJ. Combination Square Round split die ADJ. hack saw.
2 Chapter Hand Tools. 2 Chapter Hand Tools Objectives Identify the various types of hand tools. Describe the advantages and disadvantages of each type.
Tool Identification A guide to the identification of Hand Woodworking Tools.
Tools English for Careers Class. tool belt A tool belt is used to hold tools on your body.
Hand tools. Standard Head Screw Driver Used to tighten or loosen flat head screws.
Hand Tools GE 105.
TECHNICAL THEATRE I STAGECRAFT
Safe Use of Agricultural Mechanics Hand Tools
Hey! Will You Hand Me That?
By:Gord Darling Construction Technology
Agriscience, Unit 7a: Investigate careers related to the field of agricultural engineering
Using Basic Hand Tools. Next Generation Science/Common Core Standards Addressed! CCSS.ELALiteracy. RST.11 ‐ 12.9Synthesize information from a range of.
Florida FFA Tool Identification CDE Samples Initial Work Courtesy of: Kyle Hearn Taylor Middle-High School Pierson, FL 32180
Tool Identification Ag Structures.
© 2020 SlidePlayer.com Inc. All rights reserved.