1. ANSWERS

2. Steel
Engineers’ Square
Odd leg calipers

3. Paint

4. Ideas
Mortise & Tenon
Cross Halving Joint
Dowel Joint

5. Sash Cramps
Clamping a model up without glue to make sure everything fits.
Belt sander
Stained varnish / Stain

7. P P P P P It is not free standing It has sharp corners
It is not one piece of acrylic P
It can only carry three pencils 6 2
Idea 2 holds the pencils most securely because it has two holes which line up.
Mark out the fold lines and drill holes
Drill the holes
Clean up the edges
Bend to shape

8. 37mm
35mm
Brass
Removes sharp edges and corners
Creates a rough surface which improves grip

9. Tailstock
Remove the chuck key before starting the machine.
Centre drill
Micrometer

11. Mortise gauge
Forstner bit
Keep two hands behind the blade
Glass paper / Sand paper

12. Casting
Drag

13. Hacksaw
Twist drill
Pedestal drill
Hold the base securely in a vice when drilling / keep hands clear of the moving chuck
Tongs

14. The number of toothbrushes to be stored
The size of toothbrushes to be stored
It does not rust
Clamp both pieces together and drill both at once

15. Rub with wet and dry paper
Polish with Brasso and a cloth
Strip Heater
It would bubble and melt

16. The width of the hand
The length of the thumb
Woodturning Lathe
Plane
Tenon Saw

17. Gouge
For leverage and safety