1. Year 7 RM Wood Belt Sander
Name of Equipment
Image
Usage/Definition
Belt Sander
An electrically powered, portable sanding tool with a continuous abrasive belt driven in one direction only
Bench Hook
its purpose is to provide a stop against which the piece of wood being worked can be firmly held, without having to use the vice
Claw Hammer
a hammer with one side of the head split and curved, used for extracting nails
Coping Saw
a saw with a very narrow blade stretched across a D-shaped frame, used for cutting curves in wood
Cork Sanding Block
a block used to hold sandpaper
Disc Sander
a machine with a flat circular disk faced with abrasive for smoothing wood surfaces
Name of Equipment
Image
Usage/Definition
G-Clamp
a type of clamp device typically used to hold a wood or metal workpiece
Safety Glasses
toughened for protecting the eyes when using power tools equipment.
Sand Paper
paper with sand or another abrasive stuck to it, used for smoothing or polishing woodwork or other surfaces.
Scissors
an instrument used for cutting cloth, paper, and other materials.
Screwdriver (Terminal)
a tool used for turning screws; usually a wooden or plastic handle with a thin flattened square-cut tip.
Screwdriver
(Philips Head)
a tool used for turning screws; usually a wooden or plastic handle with a thin cross-cut tip.

2. Name of tool/ equipment
Name of Equipment
Image
Usage/Definition
Smoothing Plane
Plaining the wood off in strips, rather than by successive buffing and scratching
Steel Ruler
A tool for accurately measuring materials
Tenon Saw
a small saw with a strong brass or steel back for precise work
Tri- Square
a woodworking or a metalworking tool used for marking and measuring a piece of wood
Woodworking Vice
a vise with jaws that are padded in order to hold lumber without denting it
Name of tool/ equipment
Image
Usage/Definition
Hole Saw
a tool for making circular holes
Countersink bit
a bit for enlarging the upper part of a hole. Screws become flush with the surface
Chuck
It is a specialised type of clamp used to hold an object with radial symmetry, especially a cylinder
Chuck key
a small metal device for tightening the chuck of a drill
Flat drill bit
splinter out the back side of the hole when they cut through