Sewing Equipment. 1. Beeswax Coats and strengthens thread for hand sewing or embroidering. It also helps prevent knots.

Slides:



Advertisements
Similar presentations
Sewing Tools Assignment
Advertisements

Small Sewing Equipment
Name: ___________________
12.01 Sewing Tools.
Pattern Symbols.
Sewing Tools Assignment
Pattern Symbols Layout Charts Sewing Instructions
Usually the least expensive natural fiber is: 1.Linen 2.Wool 3.Cotton 4.Silk.
Ready… Set… SEW! Basic Sewing Terms and Definitions.
Machine Stitching Techniques Obj Understand Engineering & Construction.
Sewing Equipment FACS Chapter 43.
Sewing Terms. Cutting and Measuring Equipment Seam Ripper: A small tool used to remove stitches that are sewn. Tape Measure: a measuring device used to.
Sewing Equipment.
Sewing. Tracing patterns on fabric Put enough pressure on the tracing wheel to transfer the pattern markings onto the fabric Put enough pressure on the.
Sewing Equipment Turn to the sewing equipment page in your sewing packet.
Sewing Notes th Grade.
Teen Living Notes Competency: Basic fashion construction procedures to produce personal clothing & home accessories.
Unit 4 Clothing/Project Construction
Apparel Construction Review. Sewing Machine  Needle thread + bobbin thread= stitch  To bring up bobbin thread, hold needle thread while turning hand.
Clothing I Test Review.
Small Sewing Equipment
Basic Sewing Terms and Definitions
Teen Living Objective Fashion Construction Teen Living Objective
Name: ___________________
7th Grade Sewing Notes Today’s Teen Chapter 33 Page
Sewing Terms & Equipment
Small Sewing Equipment. Tape Measure Use: Taking body measurements Care & Precautions: Keep tape wrapped up Don’t stretch.
Seam Finishes Gwishiri Apparel I. Sewing Plain Seams A seam is a line of stitching that holds two layers of fabric together. A plain seam is the standard.
The rules of pattern layout and cutting
SEWING NOTIONS. What Is a Sewing Notion ? A notion is any sewing supply or tool that you can hold easily in one hand.
 Used to protect your finger when sewing by hand. Use to push needle through heavy fabrics. Worn on middle finger of sewing hand.
Everything you need to know about Patterns…..
A.
Sewing tools.
Sewing Equipment.
Intro to the Sewing Machine. 1. Stitch Plate Where the seam allowance guidelines are found. Each line is 1/8” apart, beginning with the inside edge of.
1 Part 3 Getting Ready to Sew. 2 Stay Organized Gather all your notions and supplies Double-check the steps to take Press after each construction step.
 Safety and Sewing equipment. Safety in the sewing room 1. No running at anytime 2. Pass scissors handle first with blade closed 3. When using iron keep.
1 Stitching by Machine Part 4. 2 Stitching Lengths  Basting Temporarily holds Very long, 6 stitches per inch  Standard Permanent seams 10 – 12 stitches.
1 Basic Construction Fundamentals Chapter Unit Construction Prepare separate garment pieces first, and then assemble in specific order Prepare separate.
1 Sewing Skills Chapter Sewing is a complex task Learn fabrics, patterns, equipment, and basic sewing techniques.
Sewing Tools. Besides a sewing machine, you will need a few tools of the trade. You will need: -Measuring tools -Cutting tools -Marking equipment -Other.
Sewing Equipment.
LEVEL 1 Name: _______________________ Q: What is this symbol? A: Q: What is this symbol? A: Q: What is this symbol? A: Q: What is this symbol? A: Q: What.
BASIC SEWING TIPS/TERMS Teen Living. SEWING MACHINE TIPS Remember that the presser foot keeps fabric in place while sewing. Sewing machine needles should.
SEWING EQUIPMENT Laura VanWaardhuizen Waukee High School.
SEWING TERMS. Sewing Terms Backstitch: Used at the beginning and the end of a seam, a couple extra stitches are sewn back and forth to anchor (secure)
12.01 Sewing Tools. Shears  Purpose : Heavy Duty Cutting of Fabric.  One handle larger than the other.
PATTERN SYMBOLS CLOTHING/SPORTS SEWING. GRAIN LINE A heavy solid line with an arrow at each end It appears on all pattern pieces that aren't cut on the.
Sewing Equipment. Tape measure – used to take body measurements; 60” long.
What Is a Sewing Notion ? A notion is any sewing supply or tool that you can hold easily in one hand.
Clothing/Textiles Review Everything You Need To Know!
YARD STICK This measuring tool is usually used to measure lengths up to 1 yard (3 feet).
Sewing Equipment. 1. Beeswax Coats and strengthens thread for hand sewing or embroidering. It also helps prevent knots.
Sewing Definitions & Notes: Strand 4 Construction Samples
Intro to Sewing & Fashion
Sewing Equipment.
Answers to the Final Study Guide
Intro to FCS Lenape High School
Terms to Know Before You Sew!
Name: ___________________
Stitching by Machine Part 4.
Machine Stitching Techniques
Machine Stitching Techniques
Review of Sewing Terms and Techniques
Sewing Tools Assignment
Sewing Tools.
Basic Sewing Techniques
Small Sewing Equipment: Marking, Stitching/Hand Sewing, & Pressing
Machine Stitching Techniques
Presentation transcript:

Sewing Equipment

1. Beeswax Coats and strengthens thread for hand sewing or embroidering. It also helps prevent knots.

2. Bobbin A small spool, made of plastic or metal, around which the lower thread of the sewing machine is wound. 3. Bobbin Case The part of the sewing machine that holds the bobbin.

4. Bodkin A small tool used to draw elastic or other material through a casing. 5. Lint Roller Used to remove thread and fabric fibers from clothing.

6. Marking Pens or Pencils Fabric safe pens or pencils used for transferring pattern markings. Most are water-soluble or have disappearing ink. 7. Measuring Tape Flexible piece of equipment used to measure body measurements, grainlines and long distances.

9. Needle Threader A small piece of equipment used to pull thread through the eye of a hand needle. 8. Needle A small, slender piece of metal with a sharp point at one end ad a hole, or “eye” at the other. Used for hand sewing.

10. Pin Cushion Small cushion used to hold and sharpen straight pins. 11. Pins Holds layers of fabric together for cutting and sewing.

12. Pinking Shears Shears used to cut a zig-zag, ravel-resistant edge on the fabric.

13. Rotary Cutting Equipment Equipment used to cut very straight, clean lines in fabric. Never use the rotary blade without the ruler or the cutting mat. Rotary Cutter Rotary Mat Rotary Ruler

14. Safety Pins Pins used to fasten fabric together that have a protective clasp on the end. 15. Scissors Scissors used for cutting patterns and other non-fabric items, like paper patterns.

16. Seam Gauge Metal six-inch ruler with a sliding marker. 17. Seam Ripper Useful tool that helps unpick small stitches.

19. Thimble A small metal cone used to protect fingers during sewing. 18. Shears Sharp cutting tool to be used ONLY on fabric.

20. Thread A very long, thin strand of cotton, nylon or other fibers used for sewing. Standard thread is “all-purpose” and high quality thread prevents stitching problems.

21. Specialty Thread Includes thread such as quilting, heavy duty, embroidery and metallic. These are used for specific purposes or for decoration.

22. Tracing Paper & Wheel Powdered paper and metal wheel used to transfer pattern markings to fabric.

Sewing Terms

1. “Right” Side The patterned side of fabric that will be showing when you are done sewing your project. Sometimes called the “Pretty” side. “Right” Side“Wrong” Side

2. “Wrong” Side The back side of fabric that will be on the inside of the project you are sewing. Sometimes called the “Ugly” side. “Right” Side“Wrong” Side

Regular Stitch LengthBasting Stitch Length 4. Basting Stitch Long, temporary stitches used to hold pieces of fabric together. 3. Backstitch To machine stitch two or three stitches BACKWARDS on the same line at the beginning and end of a seam to secure the stitches.

5. Buttonhole A sewn slash in a garment used with a button as a fastener. Represented by these symbols: 6. Buttonhole Formula Formula for measuring the correct length of a buttonhole: Button Diameter + Button Depth

7. Casing A tunnel through which elastic or cording is threaded. 8. Casing Formula formula for measuring the correct width of a casing: Elastic/Cording Width + 1/4“ + Seam Allowance

9. Clipping A short cut made in the seam allowance-but not through the stitching-to allow for “bendability”. 10. Notching Cutting V-shaped wedges out of the seam allowance to reduce bulk.

11. Cutting Line The solid line on pattern pieces that you cut around. 12. Stitching Line The dashed line on a pattern that shows where the stitching should be.

13. Gathering Two to three parallel rows of basting stitches to create fullness in a garment.

14. Grading / Trimming Trimming layers of the seam allowance to decrease bulk.

15. Grainline Arrowed line indicating how to place the pattern piece on the material. This usually runs PARALLEL to the selvage. 16. Hem The raw edge of any fabric, usually an article of clothing, turned back to the wrong side and stitched down.

17. Interfacing A non-woven fabric used to strengthen and stabilize other fabrics. (It usually has a fusible, heat-activated side.)

18. Mitered Corner Pressing a corner of a square or rectangular edge, then refolding the point diagonally to create a sharp right angle

19. Notion All items, other than fabric and patterns, needed to complete a sewing project. (Ex: buttons, zippers, trims, etc.)

20. Pattern Indicates what you will be making-includes size chart, garment views, notions needed, suggested fabrics and material quantities.

21. Ease Added to commercial patterns for style, fit and wearing comfort.

22. Pivot At the end of a stitching line, leaving the needle down in the fabric, lifting the presser foot, turning or pivoting the fabric. After lowering the presser foot, the stitching will continue in a different direction. This technique is helpful when turning corners on a project.

23. Reinforced Stitch An extra row of stitching about 1/8” inside the original seam to reinforce an area of high stress, such as a crotch seam or underarm seam. Shortening the stitch length can also reinforce a seam.

25. Seam Allowance The distance between the edge of the fabric and the stitched line. 24. Seam The stitched line that is created by sewing.

26. Seam Finish Methods of finishing seam allowances so that they won’t fray or unravel. (The FASTEST method is serging.)

27. Selvage The tightly woven edges on the fabric that run parallel to each other down the length of the fabric. Selvage

28. Slipstitch/Blind Stitch A hand stitch that is almost invisible on both the right and the wrong side of the project. 29. Top-Stitch A row of stitches about 1/4” away from the seam on the top or RIGHT side.

30. Soft Goods Products made with textiles and fabrics. Examples include: apparel, bags, linens and home furnishings.

Pattern Symbols

Pattern symbols are an important part of sewing. Learning how to read and use pattern symbols will help you to create a professional looking project, save you time and also make sewing it together much easier. Pattern symbols should be transferred from the paper pattern piece to the fabric AFTER the fabric has been cut out, but BEFORE the paper pattern is removed.

1. Grainline Arrowed line indicating how to place the pattern piece on the material. This usually runs PARALLEL to the selvage. 2. Place-On-Fold Line An arrow with bent corners to indicate pattern must be placed and cut on a folded edge of fabric.

3. Notches Diamond shaped symbols that extend beyond the cutting line on the pattern. They are used to match up pattern pieces. 4. Double/Triple Notches Used to match up pattern pieces. Double and triple notches usually symbolize the front and back of a pattern piece.

Single Dart Double-Ended Dart 5. Dart Folds sewn into fabric to help provide a three- dimensional shape to a garment.

6. Button A small fastener usually made of plastic. It is most commonly used in clothing. 7. Buttonhole A sewn slash in a garment used with a button as a fastener.

8. Triangles / Circles / Squares Symbols most commonly used for placing sleeves, pockets or decorations.

9. Sizing Lines Indicates where you cut both the pattern and fabric. The line style is different for each size included in multi-size patterns.

10. Adjustment Lines A double solid line running across a pattern piece. This is the recommended area in which to lengthen or shorten the pattern piece.

Grainlines

Grainlines in woven fabric are important to understand because they can affect the final outcome of your project. Grainlines can affect the stretch and fit of clothing and the lining up of printed designs. The direction of the grainline arrow will show you how to place your pattern pieces.

A. Crosswise Grain (Weft) Perpendicular to the selvage edge of fabric-has a little bit of stretch. Perpendicular to Selvage

B. Bias Diagonal angle on fabric-provides the GREATEST amount of stretch in the fabric. Bias

C. Lengthwise Grain (Warp) Parallel to the selvage edge of fabric-has the LEAST amount of stretch. Parallel to the Selvage

D. Place-On-Fold An arrow with bent corners to indicate pattern must be placed and cut on a folded edge of fabric. D.

E. Selvage The tightly woven edges on fabric that runs lengthwise down the fabric. E.