IP camera SD card storage

LOG INTO THE CAMERA Not all cameras have SD recording capabilities. A quick way to tell is to log into the camera. If the camera has a Playback button, it has SD card recording.

SET THE TIME Setting the time is very important for proper indexing.

ENABLE EVENTS Select Event in sub- menu. Enable events if you are going to use them. Boot, Network Loss, Motion, etc..

ENABLE EVENTS Select Event Out sub- menu. Enable record. Select options of overwrite, continuous, schedule. Format the SD card. Save Settings

ENABLE EVENTS Select Event Map. Click ADD. Give the Event a name. Select the Event from the drop down list. Select record. Save Settings. This completes the camera setup. You can now select the Playback Tab with the magnifying glass icon.

SEARCH PLAYBACK From a browser (IE) a time bar is available and a search calendar.

SEARCH PLAYBACK Events can be searched. Enter a start and end date. Click GO. Double click on the event.

SEARCH PLAYBACK Click Play.

EXPORT VIDEO Click on the Clip Copy icon. Enter the Start/End information. Select the destination. Click on Estimate. Click Export. A completed info box will appear when done.

ATVISION IP Select the Device Playback Tab. Drag the camera from the device list to the field. The time bar will populate after it communicates with the camera.

ATVISION IP Select the Save icon to save video to the PC. Enter the information, Click Estimate, then Export. An Export Status bar will let you know the status of the file.

IP camera SD card storage