BETHS PENCIL BOX
This is a pictures of my 250 mm piece of wood This is my piece of wood cut half way and I am about to chisel it!
This is me when I was using the routing machine and this is what it turned out like!!!
This is my box finished all it needs now is a coat of vanish Here it is varnished
THESE ARE THE TOOLS I USED
This is the marking gauge I used to mark where I wanted to chisel up to.
This is the saw that I used to cut with.
These are the goggles I used to protect my eyes.
These are the ear muffs I used to protect my ear drums.
These are the clamps I used so that my box would glue together.
This is the mallet I used to chisel with.
This is the putty I used to fill the holes with.
This is the varnish I used to make my box shiny
This is the pyro pen I used to burn patterns on my box
THE HAMMER AND NAILS I USED
This is the sand paper I used to make my box smooth.
This is the chisel I used.
This is the disc sander I used to make my box smooth and to round off the edges.
This is the plane I use to cut of edges.
This is the nail punch I used so the nails didn’t stick out.
BY BETH PRATT