1. Matt Scofield Profile 2010 Fall Mr. Hageman B65 B Advanced Cabinetry M/W 5:30-8:30pm.

2. A picnic table that I built for a friend with 2”x6”x8”

3. Practice swords that I cut out on the band saw and used the variable spindle sander to smooth edges

4. Work tables that me, jess, and zack designed. The back folds down creating a glue up or lower working area.

5. Dresser that we are building 100 for the halfway houses in Bakersfield, Ca.

6. Reception desk for Valley Granite.

7. Back of reception desk with lowers/bottom section.

8. Segmented bowl turned out of Mahogany and oak.

9. The bottom of the segmented bowl.

12. Base unit for customer with a wilsonart lamanite top that was applied with contact cement and then trimmed with trim router.

13. This was a turkey mount that I made for the turkey we got this season.

14. Base units that I installed. European.

15. Uppers with arch that was still needing filler pieces scribed to wall and crown molding attached.

16. Uppers and Lowers installed with granite countertops.

17. Segmented bowl with 220 pieces with African Paduak, Brazillian Walnut, Maple, and Cherry.

18. Finished segmented bowl with bottom cut out with a template and router.