1. SAFETY SCANNING ELIMINATE HAZARDS THRU: RECOGNITION, EVALUATION, CONTROL

2. OBJECTIVES Become effective “Safety Scanners” –Constantly be looking for hazards –Spot and recognize hazards –Take action to reduce or eliminate Understand basic hazards Safety is not a Spectator Sport

3. RECOGNIZING HAZARDS Training Job Experience Familiarity with operation Lack of familiarity with area Use of safety scanning survey technique

4. WHAT IS A HAZARD Caught in/on/between Contact by/with Struck by/against Fall to surface/below Slip/Trip Over-exertion Bodily Reaction Over-exposure What if?

5. HOW TO SCAN S weep eyes around work area H azards present? A nalyze possible/probable results R eact to hazards P roceed

6. TAKE SMALLER BITES Cannot eat a whole pie at once 1.Look at one shop 2.One wall area of shop 3.One piece of equipment 4.One aspect of that equipment

7. HAZARDS IDENTIFIED Correct Yourself Contact Building Manager Refer to Supervisor or Safety Bring up in Safety Meeting Refer to Safety Committee Reduce the Hazard until Fixed

8. PRACTICE Must practice to be effective Start with small area and short time Increase area and time practiced Make it AUTOMATIC