1. ‘Market Leaders in Rendered Building Products’ The Poly-Tek Cabin

2. The Base

3. Flooring on Steel Stratco Tuff-Floor Base with 19mm GP Flooring

4. Bottom Plate All timber is 90x45 MGP 12

5. First Panel Insert corner junction stud then fit first panel Panels easily lifted into place, only weighing 20kg per sqm.

6. Corner Panel up

7. Insert stud and cyclone rod

8. Back Wall up

9. Install Top plates & Tie-Down

10. Ensure all panels are square

11. Nail off Panels

12. Door installation

13. Window Installation

14. Installing window heads

15. Cutting walls on the rake

16. Roof Installation Using the Bondor Solarspan Roof system the roof was installed in 2 hours The entire process including roof screwed on and finished was completed in 1 day!

17. Two coats paint later

18. Perfect Render Effect Finish This finish was achieved using 2 coats of Dulux Weathershield.

19. The Finished Product

21. The Poly-Tek SIPS Cabin