1. EESIFLO International Pte Ltd

2. Product Range Ultrasonic Flow meter Water-in-Oil Monitor
Water-in-Fuel Monitor
BS&W Water Cut Meter
Static Mixer
Oil & Gas Sampling System

3. REAL TIME
WATER IN OIL
MONITOR EASZ-1

4. EASZ-1 Water-in-Oil Monitor
The online water in oil monitors manufactured by EESIFLO International were designed to measure water in any form within an oil or hydrocarbon. The meters can be installed for any type of oil including lubricating fluids, hydraulics, fuel, crude oil and various hydrocarbons and mineral based liquids. We have paid special attention to the manufacturing of high quality monitors suitable for harsh environments or hazardous areas.

5. How does it works?
Oil & Water have dissimilar dielectric properties; the typical value Dielectric Constant (εr) for oil is between 1.7 and 2.3 depending on the API gravity, and water has a typical value of 80.
i.e. Water is capable of storing much more energy per volume unit then average oil, which can be measured in pF.
Therefore, any change in the dielectric properties to oil due to water, will show up as a change in water content.
EASZ-1 is designed to measure such capacitance change, which is correlated to the change of water content, and output to a remote display, flow computer or data system.

6. FORMS OF WATER CONTAMINATION
DISSOLVED WATER.
EMULSIFIED WATER.
FREE WATER

7. WATER IN OIL MONITOR EASZ-1
RANGE 0-25%
RESOLUTION 35 PPM
RESPONSE TIME: 1 SECOND
LOOP POWERED 2 WIRE
EX PROOF OPTIONAL
WORKS ON ALL TYPE OF OIL

8. Applicable to All Oil Vegetable Oil Crude Oil Hydraulic Oil
Lubrication Oil
Fuel Oil

9. Applications Refinery Storage Tanker Oil Rig Oil Receiving QC
Engine Lubrication System
Food Manufacturing
Paper Mill

10. EASZ-1 Water-in-Oil Monitor (for Palm Oil)
Palm Oil Refineries – Unloading
Palm Oil Refineries – Process Control
Analyzer vs Monitor
Sample Conditioning
Water Separation & Emulsion
Purpose of Monitoring
EASZ-1 – applications
[space bar]

11. Unloading Process IMPERFECT CONDITION Inconsistent temperature
Inconsistent properties
Inconsistent flow rate

12. THE PRACTICE…
BEFORE UNLOADING: Sample is taken from the top of the tanker.
One at the top and another at the bottom.
DURING UNLOADING
Some, from the outlet.
[space bar]

13. EASZ-1 APPLICATION…
0.197
0.152
0.125
[space bar]

14. EASZ-1 APPLICATION…
0 V R N
0.125
A L A R M
[space bar]

15. WATER %
DATA LOGGER/RECORDER
The EASZ-1 is also suitable in some areas of process control e.g where the CPO moisture content needs constant monitoring before transferring to process line/storage; or for negotiation purposes.
We can expect greater accuracy under these conditions mainly due to stable temperature and the fact that we are only looking at dissolved water in oil.

16. Quick Start, Calibration & Maintenance
EASY CALIBRATION and “ZERO” point setting
No complicating external software required
0.127

17. Quick Start, Calibration & Maintenance
0.127
All Program
Accessories
Communication
Hyper Terminal

18. Quick Start, Calibration & Maintenance

19. TYPICAL INSTALLATION

20. Using Du series we can monitor Graph and record the Same

21. Specification & Function
Size
Water in Oil range
Resolution
Temperature compensation
Sensor Maximum Temperature range
Minimum recommended flow velocity
Shipping Weight
Construction Material
Standard Pressure Rating
Power Requirements
Electronic Housing Protection
Electronic Housing Temperature Range
Hazardous Area Compliance
Outputs
Display Options
1 inch Threaded -NPT or BSP / Flanged
ANSI , DIN or JIS
0- 0.1% ( ppm) , 0-1%, 0-3% , 0-10% ,
0-25% (Jumper selectable)
+/- 30ppm
Integral
0-260 degF /125 degC
Recommend 0.15 m/s
Approximately 2kg/6lbs
All 316 stainless steel.
16 Bar /230 psi (higher pressure consult factory)
Loop Power 12/24 vdc
IP 66
Range -40 °F -185 °F (-40 °C to 85 °C)
(optional ATEX /IECEx Zone 0)
4-20 mA DC , RS232 Full Duplex
Remote readout/display /low-high alarm

22. FEATURES Response time of 1 second Loop power – 2 wire
Temperature Compensation
Flexible range
Easy Installation
Maintenance Free
Measurement of total water in any form whether dissolved, free or emulsified

23. ENGINES DIESEL OR FUEL INLET ENGINE LUBRICATION.
INSTALLATION AFTER CENTRIFUGE

24. Unloading Water-in-Oil Monitor

25. Unloading Water-in-Oil Monitor

26. USING WATER IN OIL Monitor FOR EMULSION
Where We can Use Water In oil Monitor For EMULSION
Emulsion solvent
RETURN LINE
Suggested Ratio
Making Emulsion
FO(49) : Water(49) : Solvent (2)
Mixing Emulsion
F.O (88-90) : EMULSION (10-12)
WATER
LINE
EMULSION
MAKING
TANK
MAIN
STORAGE
TANK
FOR
MIXING & V3 V2 V1 V5 P V6 V4
PUMP TO BURNER / BOILER /
FURNACE DIRECTLY
THROUGH DAY TANK
Duplex Filter
mesh
FOR TANKER UNLOAD
PUMP– Gear Pump, 5-6 kg pressure, Capacity time of Emulsion volume per hour

27. APPLICATION LUBE OIL FUEL INLET MAIN ENGINE LUBRICATION OIL.
HYDRAULIC UITS
STERN TUBE BEARING LUBRICATION
EASZ1 RETROFITTED TO ALFALAVAL PURIFICATION SYSTEM

28. POWER PLANT-TURBINES
INSTALLATION IN A TURBINE LUB OIL SYSTEM

29. WATER IN OIL SYSTEM-Lube Oil at VRM and Raw Mill

30. THANK YOU FOR YOUR TIME
EESIFLO International Pte Ltd