Presentation is loading. Please wait.

Presentation is loading. Please wait.

Airport Surveying-GIS Program

Similar presentations


Presentation on theme: "Airport Surveying-GIS Program"— Presentation transcript:

1 Airport Surveying-GIS Program
David Perry Contractor for FAA, Airport Engineering Division (AAS-100)

2 Overview History of the Program
Benefits of the program to the FAA and our airport sponsors Why implement such a process? Questions

3 History of the Program Conceived to address the airport data problems the FAA was experiencing agency wide It was recognized that there had to be a better way of collecting, storing managing, and sharing the data about our airports Adopted as a FAA Flight Plan goal in 2006 Talk to almost any Tech Ops field technician and they will tell you (if they can remember them all) the number of times they were on an airport surveying to install a new navaid and ran into other surveyors from NGS or working from the airport. All of them collecting the same or very similar information, all trying to occupy the same control monument But why? Why were there numerous survey crews all doing different tasks on the same airport but collecting the same data? It just didn’t make sense then, it doesn’t now. This is the genesis of the Airport Surveying/GIS Program

4 What Is The Length Of This Runway?
This image and measurement in the lower left hand corner of the slide was captured off Google Earth. The answer depends on who you ask !!!!

5 Which Data Is Correct? NFDC NASR Data NFPG Data iOEAAA
These screenshots are from three (3) FAA web sites were collected at the exact same date and time and supposedly describe the same runway end at the same airport But why do all three have different values? Is it because of the proposed runway end location shown in iOEAAA? No, because the current data doesn’t even match.

6 How The Program Is Designed To Help
The Airport Surveying-GIS program provides a single portal for the collection and dissemination of standards based verified source data to support future design, mapping, surveying, and construction activities from a known good (independent verification and validation) and maintained data set. Airports-GIS provides the foundation for connecting the airports, FAA, and other agencies A central database for storing survey, charting, analysis, and planning data

7 Airport Surveying/GIS Program Vision
“All I need to know about airport data … I learned in kindergarten.” Provide an interoperable web-based system for the collection, management, maintenance and sharing of airport data addressing the needs of the FAA lines of business and the individual airports collectively rather than individually. This initiative is part and parcel of the Geo-Spatial One-Stop and the effort to centralize all geographic information developed or used by the government In other words … data sharing

8 Submission and processing of electronic Airport Layout Plans
Program Benefits Dependable Data is collected once and then managed through the system ensuring the most current data is readily available Greater Productivity Submission and processing of electronic Airport Layout Plans Connected Electronic management and processing of all airport data … one stop shop for managing and updating an airports data Best Economics GIS is a scalable and interoperable technology allowing others to use and share data without recollecting, because the metadata provides the source, accuracy, collection methodology, etc. of the dataset. Each entity builds on the base data set to meet its own requirements

9 Airport Sponsor Benefits
Provides a single point of entry for the submission and maintenance of AIRPORT DATA and to communicate the changes electronically to the FAA Provides non-GIS Equipped Airports with a GIS Foundation for: Airport Layout Plans, Obstruction Charts, Construction plans, and other airport mapping products Planning Zoning Improves Response to Airport Changes Provides On-line Access to Electronic Obstruction Charts and Airport Layout Plan Data to FAA, Airports, and Consultants Provides the sponsor access to FAA data Speeds Production and Currency of FAA Charts and publications

10 Why Implement Such A Process?
To meet the challenges of the changing role of aeronautical data in the system, the FAA needed to rethink the way it collects, stores, and maintains the data about airports. We need to focus on managing our airport and aeronautical data. The problem with the previous method was that nothing was integrated. Changes to an airport environment did not flow through the agency in an efficient manner. Having a single entry and management point for the data will provide greater data availability and efficiency.

11 Why Implement Such A Process?
The role and importance of airport and aeronautical data in meeting the safety, regularity and efficiency of air navigation changed significantly with the implementation of area navigation (RNAV), required navigation performance (RNP) and airborne computer based navigation systems.

12 Answer … To provide a common platform for the collection, maintenance, and dissemination of airport and aeronautical information and sharing of the data for improved efficiency of airport operations for both the sponsor and the FAA.

13 The rest of the story … Current initiatives within aviation industry and the FAA require a data centric airport environment, as opposed to the traditional product based environment. Airports GIS D-NOTAMS D-TAXI

14 Why Change? UDDF (Universal Data Delivery Format) delivered data … it was an outline, it did not tell the whole story! This runway entry only shows the geographic position (latitude/longitude, true bearing, touchdown zone elevation, and four (4) elevation points on an 11,500 foot runway.

15 The answer … a richer data set
Geospatial data identifies the geographic location and characteristics of natural or man-made features Moving to a geospatial environment allows us to not only know the geographic location but also, and sometimes more importantly the characteristics of a feature. In the example (left) of a runway … We not only have the coordinates (1) We also have the characteristics (2) Width Length Surface Type Surface Material Surface Condition A much richer data set …all together in a single place! 1 2

16 Questions

17 Airport Surveying-GIS Program
Timothy Roe, Program Manager, Airport and Airspace Programs FAA, Air Traffic Organization, System Operations, AIM and Airspace Aeronautical Information Management (AJR-32) Architecture and Planning Team

18 FAA Advisory Circulars
AC 150/ Establishes the requirements for and how to install geodetic control AC 150/ Identifies the requirements for and how to collect the required imagery AC 150/ Identifies what to collect, required accuracy and how to provide the data

19 What is Geodetic Control?
A network of carefully measured points used as a reference for other surveys or to establish or measure accuracy in map making whose precise positions and/or heights are known and take into account the shape and size of the Earth.

20 At airports we call them PACS/SACS
PACS = Primary Airport Control Station SACS = Secondary Airport Control Station A stainless steel rod three-dimensional (3-D) drivable survey monument is the recommended survey marker producing the stability required for most conditions.

21 ARP Policy on Permanent Geodetic Control (PACS/SACS)
AC 150/ , paragraph 2.2 Airports Requiring Geodetic Control Monumentation Permanent Control. FAA Regional Airports Divisions will determine which airports require permanent geodetic control monumentation in the form of PACS or SACS based on the activity (operational or proposed future construction) at the airport. However, for all airports in the National Plan of Integrated Airport Systems (NPIAS), we strongly recommend that at least the PACS be established.

22 PACS and SACS considerations for Airports
Permanency with appropriate geographic location and spacing. Ease of recovery, location should allow efficient use by surveying community. Accessible by public. Public property should be utilized where feasible. Minimal multi-path. No known potential conflict with future development. Aerial-photo identifiable. Protect the monuments … they are important and expensive!

23 Geodetic Control Required Deliverables
Use the FAA Deliverable Checklist to guide the production and delivery or project deliverables. Survey Work Plan (Prior to starting … more later) Quality Control Plan (Prior to starting … more later) Project Status Reports (more later) Final Project Report

24 Final Project Report Used by NGS to verify the information provided by the surveyor Contains such things as … Description of the Project Copies of Field Logs Original Data Descriptions of PACS and SACS location Photographs of PACS and SACS All required elements are listed in the FAA deliverables checklist! Submitted through Airports GIS web site

25 FAA Advisory Circulars
AC 150/ Establishes the requirements for and how to install geodetic control AC 150/ Identifies the requirements for collecting the required imagery AC 150/ Identifies what to collect, required accuracy and how to provide the data

26 Why Do We Require Imagery?
The role and importance of airport and aeronautical data in meeting the safety, regularity and efficiency of air navigation changed significantly with the implementation of area navigation (RNAV), required navigation performance (RNP) and airborne computer based navigation systems. There are 2 reasons we require imagery. The primary reason we require imagery for projects involving safety critical data is to ensure the quality of the aeronautical information collected. Secondly, we feel that the use of imagery is an accurate and potentially cost saving method of collecting this type of data. Current initiatives within aviation industry (moving maps, electronic flight information, advanced avionics) require a data centric airport environment, as opposed to the traditional product based environment. As you are aware, the FAA is charged with

27 NGS Verification Ask the students to refer to the ANAFINALNGS handout.
In the first 2,600ft. of the approach there appears to be 2 obstructions (it required collection of 3) that should be added to fulfill the requirements for highest obstructions of this section. In the section of the approach between 2,600ft. and 4,000ft. there appears to be 2 obstructions that should be added to fulfill the requirements for highest obstructions of this section. In the first 4,000ft of the left transition there appears to be 1 obstruction that is higher than one of the two obstructions provided by the consultant to fulfill the requirements for highest obstructions of this section. In the first 4,000ft. of the right transition there appears to be 2 obstructions that are higher than the 2 obstructions provided by the consultant to fulfill the requirements for highest obstructions of this section. In the section of the approach between 4,000ft. and 10,200ft. there appears to be 2 obstructions that should be added to fulfill the requirements for highest obstructions of this section. These obstructions also appear to be the most penetrating obstructions of this section. In the section of the right transition between 4,000ft. and 10,200ft. there appears to be 1 obstruction that should be added to fulfill the requirements for highest obstructions of this section.

28 “leaving footsteps …” Others should (read as must) be able to retrace the original surveying or mapping product (without having to contact the person who created it!) This is paraphrased from a presentation by Mr. Michael Dennis, P.E., M.S.C.E. “Ghost in the Machine at ACSM 2007 presentation.

29 Required Deliverables (for NGS)
The airport sponsor must provide NGS with digital stereo imagery of the area of analysis. The dimensions of this area depend on the type of survey the contractor is requested to perform. Acquire the imagery within at most 6 months prior to the ground survey (AC 150/ survey). Submit the imagery well in advance of the survey deliverables for NGS review and approval. Upon imagery approval, the final survey deliverables may be submitted. Submit the imagery and associated deliverables directly to NGS for review.

30 Required Deliverables (for FAA)
Provide the FAA with digital orthoimagery of the area(s) flown. Develop the orthoimagery using the specifications defined by the Federal Geographic Data Committee in FGDC-STD , except the imagery should not be resampled, they should be developed at the resolution of the original imagery used for analysis. Provide metadata for the orthoimagery as described in the FGDC standard. Submit the digital orthoimagery to the FAA on similar media as hat uses to provide the imagery to NGS. Include on the delivery media FGDC compliant metadata for the orthoimagery.

31 FAA Advisory Circulars
AC 150/ Establishes the requirements for and how to install geodetic control AC 150/ Identifies the requirements for collecting the required imagery AC 150/ Identifies what to collect, required accuracy and how to provide the data

32 Organization of AC 150/ B Though it looks daunting from the outside … it’s not really that bad! The AC has five (5) chapters and appendices Chapter 1 discusses general survey guidance and specifications Chapter 2 discusses specific survey specifications and standards Chapter 3 discusses geospatial standard and specifications (GIS rules) Chapter 4 discusses data translation and existing data Chapter 5 discusses specific about the airport features Chapter 1 – 4 cover about 100 pages the rest is chapter 5! About Chapter 5, it breaks down each feature in detail In some cases a single feature could take up many, many pages such as runway end point and navaid equipment It was broken down this way because we found out that many surveyors were unfamiliar with airport and aviation terms such as the localizer being at the end of the serviced runway.

33 Types of Surveys Surveys are on completed on airports for many different reasons Boundary Construction Utilities Obstruction Each served a single purpose, each was not coordinated sometimes collecting similar or the exact same data Some even happening at the same time!

34 New Philosophy on Airport Surveys
AC 150/ is designed to collect data about the airport as a whole rather than as a group of individual projects. Since most everything on an airport is interconnected or has a relationship to other things and these relationships should be preserved. Data collection projects should build on one another. Data provided as part of a design should be incorporated into the airport data set and later verified rather than collected new.

35 Alphabet Soup Eye Chart or Survey Requirements ???
Obstruction Surveys Alphabet Soup Eye Chart or Survey Requirements ??? NP-D AV C D ANA-LPV ANAPC PIR CGR BV Every time the FAA had a new requirement it developed a new survey specification to meet the need. The ANALPV was designed to meet the requirements for LPV approaches specifically The CGR was a survey specification in response to Congressional requirements

36 Airport Airspace Analysis
Under the previous standard (FAA 405) there were as many different types of surveys These multiple types did not always provide the information required and most were incorrectly based on 14 CFR 77 AC 150/ B has only two types of “obstruction surveys” … it is a single multifaceted surface not individual pieces Vertically Guided Non-Vertically Guided

37 Vertically Guided Airport Airspace Analysis Surface
These specifications support the airport’s planning and design activities for the development of vertically guided instrument approaches such as ILS, PAR, MLS, LPV, TLS, RNP and Baro/VNAV

38 Non-Vertically Guided Airport Airspace Analysis Surface
Use the following specifications and associated figures to complete object identification on and surrounding airports to runways designed for visual or non-vertically guided (NVG) operations (Lateral Navigation (LNAV), Localizer Performance (LP), VOR, NDB, Localizer, Localizer Directional Aid (LDA), etc.)

39 Other Types of Surveys AC 150/ B for the first time discusses standards for other types of surveys relating to or happening on Airports, most of which you are familiar with Boundary/Land Use Sub Surface Utility Engineering Topographic Airport Mapping Database Construction Airport Pavement

40 Acceptable Datum's With regard to spatial data, a datum is a reference to an approximation of the earth’s surface or a Datum. Use the following Datum's for spatial data submitted in compliance with this standard: All horizontal data must be submitted referenced to the North American Datum of 1983 All vertical data must be referenced to the North American Vertical Datum of 1988 (NAVD88).

41 Data Translation and the Use of Existing Data
Many airports have developed and collected data over the years through different projects or planning efforts. This data exists in many forms from drawings in a CADD system, to individual records in databases or through a hardcopy management system. Since the 1980’s the form of the data has evolved from a totally paper-based product to where many airports have some if not all the data available electronically. As the tools and technology changed from linen to Mylar and finally to digital CADD and GIS formats, only a few airports made the effort to ensure the quality of the data set. In some cases, the user performed data transformations from one datum to another without regard to the actual accuracy of the data. With the availability of more digital data and its associated detail, the expectations of those charged with maintaining this information also increased.

42 Data Translation and Use of Existing Data
However, no real effort or process related the data values to the true value and associated data accuracy by tracing the data back to its source. When considering the reuse of this data in a current or future project, the quality of the data is the first and most important factor determining its usability. ICAO) defines data quality as, “A degree or level of confidence that the data provided meets the requirements of the data user in terms of accuracy, resolution and integrity”. One of the first steps in determining the quality of a data set is determining its origin What is the data source, and is it traceable to the time and point of collection? If the data is not traceable to the source, then the data provider should implement a defined and repeatable process to determine the spatial accuracy and reliability of the data before the data is used.

43 Maintenance of Data Purpose is to ensure the data quality remains at an acceptable level. Make updates to airport object and obstacle data as soon as practical with sufficient lead-time to ensure the information is available when required to meet the AIRAC cycle amendment schedule. Terrain and obstacle require updating to account for uncovered errors as well as to change appropriate data (e.g. due to construction activities or vegetation growth).

44 GIS Data Features The bulk of AC 150/ B details the airport feature descriptions defining the specifications for each feature group and class. Utilize the specifications defined to ensure the data delivered is accurate and meets standards. Each feature is described by … Feature group Geometry type, Sensitivity, requirements, Positional accuracy Data capture rule, Attributes required to provide the data to the FAA.

45 Airport Features There are eleven feature groups in the standard
Airfield Navigational Aids Airspace Sea Plane Cadastral Security Environmental Surface Transportation Geospatial Utilities Manmade Structures In each Feature Group are the individual features.

46 What Attributes are required and Which are Optional?
Airport Surveying-GIS program looks at the airport as a whole rather a group of disconnected individual parts…so it should be attributed as a whole. The SOW determines who does what .

47 What Attributes Are Required and Which Are Optional?
All attributes and features located on the airport are required … Some are required from the surveyor Others are required of the sponsor or their consultant The SOW determines who does what

48 Integrating Airports GIS into Our Business Processes
Airport Sponsor Data collection, planning, design, development, or analysis activities FAA Data Region/ADO review, analysis or processing Airports GIS Database Data Sharing Data Sharing Safety Critical Critical Data Non-Safety NGS e- NASR In the title, let the audience know that “our” indicates the airports and the FAA jointly. Airports GIS is being designed to provide the data and tools airports and the FAA need to accomplish their work collaboratively in an all digital format.

49 What is the purpose of a SOW?
“A narrative description of products, services, or results to be supplied.” The SOW should indicate … A business need Document the product or service requirements that they project is undertaken to create All projects should support the organization’s strategic goal Get a new approach procedure Improve access to larger aircraft Plan for future improvements Citation: A Guide to the Project Management Body of Knowledge, Third Edition, 2004

50 What Elements Should A Good SOW Contain?
A good SOW should detail … What is needed … why are we doing the project What standards should be applied What deliverables are required What audits can or will be conducted When the deliverables are required. What scope verification will be used

51 What is Needed? Under the Airport Surveying-GIS Program, the collection of airport data consists of … The use of existing data The collection of new data or verification of existing data How do you (or the airport sponsor) determine what data is required? AC 150/ B, Table 2-1 provides information on what is required. Ask students to refer to 11x17 version of the table

52 Data Collection Requirements Matrix
This table is not meant to be an exhaustive list of requirements Each airport and each project is different This table is designed to assist in developing the requirements. The requirements for a planning initiative would be dramatically different than the requirements for engineering or design data requirements. In the design phase of a project more detailed information about a specific thing is required The design phase for a runway width or length extension project would require more detailed data collection than the planning for the project required. But the engineering data collection should build on the data collection from the planning phase or existing data … it should not gather the same data again, that’s a waste of resources. Both time and money.

53 What Deliverables Are Required?
Each AC has a specific set of deliverables identified in them. We have developed a form to assist you and the sponsor in making sure the appropriate information to complete the project is provided. If this checklist and the appropriate forms completed the correct data will be collected and provided for most projects.

54 What Should Be Addressed in the Plans?
We have already discussed the requirements for the Geodetic Control and Imagery Plans The Survey and Quality Control Plan is the overall plan addressing the total effort. It should address such items as what is the purpose of the survey? How will the data be used in the end ? What requirement of the airport is the survey meant to address?

55 Submitting the Plans Submit all plans for evaluation using the Airports GIS system. This allows for everyone (the airport sponsor, the ADO/Region, State DOT, FAA HQ, NGS) to see the plans in a single place. It provides a system for tracking when something was received ands when it was reviewed and approved. It provides traceability of the information for use in future projects.

56 Last Words … It really doesn’t matter how they collect the data, what coordinate system or unit of measure they use, as long as they tell us what it is. It follows the old adage of instruction … Tell them what you are going to tell them (Survey and Quality control Plan). Tell them (The data and associated deliverables) Tell them what you told them (Final Report)

57 What is an e-ALP? Would this be something you’d be interested in?
ALPs contain a lot of data and information that is important to FAA What if… the FAA could capture data and information from the ALP and make it available electronically for whoever needs it? What if … the FAA could electronically accept, review, coordinate, and approve ALP’s and designs and associated revisions? What if … the FAA has this capability by September 15, 2009? Would this be something you’d be interested in?

58 electronic AIRPORT LAYOUT PLAN
FLIGHT PLAN TARGET STATUS: IN PROGRESS Develop capability within the Airports-GIS application for electronic Airport Layout Diagrams (eALPs) and digital obstruction charts by SEPTEMBER 15, 2009 WHY ARE WE DEVELOPING eALP? Airport Layout Plans are required by the AIP All NPIAS airports are required to keep their ALPs current (many are outdated) Paper copies of ALPs are typically housed in multiple locations and the “latest” version(s) often vary Paper ALPs frequently contain out-of-date or contradictory information that differ from other data sources in use across FAA and ARP LOBs To optimize updated, precise data stored in A-GIS for better airport planning

59 e-ALP VISION | From There To Now
Element: Runway Attribute: Runway Threshold Runway End: 19R NAVD 88 Elevation: 8.8’ Length: 7,500’ Width: 200’ Degrees-Minutes-Seconds (NAD83 DMS) Lat. 37 deg 37' 37.94" N Long. 122 deg 22' 12.44" W Element: NAVAID Attribute: VOR/DME Frequency; Operator: FAA NAVD 88 Elevation: 13’ Lat. 37 deg 37’ ”N Long. 122 deg ”W AIP Grant: AIP No Name: Rehabilitate Apron Material: Asphalt Area: 11,243 SY Status: Completion date 10/2009 Name: Rehabilitate Runway What if… the FAA could capture and validate data against a defined standard, import it from and/or export it to an ALP, and make it available electronically for whoever needs it? From Then to Now: Spurred by the NextGen Vision, the FAA has decided to at least join the 1990’s We currently use an outdated system: Disconnected Information Systems: Survey data is put into various databases ALPs are generated in AutoCAD and printed onto rolls and rolls of paper Version control is almost non-existent Yet, even today, we have Google Maps and Google Earth and GIS capability

60 Airports GIS and e-ALP make data …information
Element: Runway Attribute: Runway Threshold Runway End: 19R NAVD 88 Elevation: 8.8’ Length: 7,500’ Width: 200’ Degrees-Minutes-Seconds (NAD83 DMS) Lat. 37 deg 37' 37.94" N Long. 122 deg 22' 12.44" W Element: NAVAID Attribute: VOR/DME Frequency; Operator: FAA NAVD 88 Elevation: 13’ Lat. 37 deg 37’ ”N Long. 122 deg ”W AIP Grant: AIP No Name: Rehabilitate Apron Material: Asphalt Area: 11,243 SY Status: Completion date 10/2009 Name: Rehabilitate Runway WE CAN DO BETTER NOW! BY PROVIDING A RICHER DATA SET THE RESULT: A COMPLETE PICTURE FOR NEXTGEN PLANNING Most of the information FAA and airport planners, developers, and operators use is location-based it can be drawn on a map it is located in 3-dimensional space Spatial data adds geographic intelligence to traditional text-based systems to facilitate: user requests geographic queries and analysis Production of intuitive graphics that provide a complete picture of the airport environment

61 IMAGINE THE INITIAL eALP END-STATE... AND BEYOND
The Benefits of e-ALP IMAGINE THE INITIAL eALP END-STATE... AND BEYOND A-GIS eALP END USERS Multi-User Accessible ALP Set Thorough Decision-Making Improved Extensive Planning Improved ALP Co-ordination Efficient Review & Approval AIRPORTS FAA A readily-available web-based program that pulls updated, precise airport data directly from A-GIS to recurrently generate e-ALPs for planning A catalyst to help field personnel coordinate airport plans in a more timely manner and to share accurate airport planning data in an integrated environment RESULT: Better Extensive Front-end Planning RESULT: Improved Long-Term Decision-making AIRPORTS-GIS will benefit all FAA lines of business, as well as stakeholders (Airport Sponsor, State Agencies, consultants) with imagery and geospatial data and increased web-based accessibility to a wide-range of data sets. ARP will see immediate benefits via the inclusion of the upcoming e-ALP drawing set. ONE PORTAL: a single, information depository, via GIS website, with data managed by ARP A tool to help airport planners dynamically visualize existing and planned airport layouts and features to augment efficient extensive planning, review, comment/approval, and decision-making

62 Questions


Download ppt "Airport Surveying-GIS Program"

Similar presentations


Ads by Google