1. EV CONTAINER CORPORATION - REVOLUTIONIZING THE BEVERAGE INDUSTRY Copyright @ EV Container Corporation EV EVkeg Purge & Fill for Brewers

2. EVKeg Purge – seal check & liner deployment - Set up a line with a resitance valve on the coupler outlet as shown - Open the keg valve and purge the keg Copyright @ EV Container Corporation

3. EVKeg Purge – seal check & liner deployment - Shut the outlet valve. The back pressure build up will open the liner in the keg - Once the liner is deployed, pressure will rise in the keg to the regulator set pressure - Shut off the cylinder valve. If the keg holds pressure the fitment seal is functional Copyright @ EV Container Corporation

4. EVKeg Purge – seal check & liner deployment - If pressure is lost, carefully remove the handle and reset the fitment seal Copyright @ EV Container Corporation

5. EVKeg Fill - Shut off the keg valve to hold the CO2 in the keg - Connect the fill coupler with a resistance valve and open the valve - Maintain a small back pressure on the outlet to ensure the liner remains deployed during filling Copyright @ EV Container Corporation

6. EVKeg Fill - When the liner is deployed and fully supported by the keg walls, the keg can be pressurized to the full operating pressure of 45PSI. Copyright @ EV Container Corporation

7. EVkeg – contact us www.evcontainer.com EV Container Corporation 2148 Beechcraft Road Unit 300 Vacaville CA 95688 415-460-5341 Copyright @ EV Container Corporation

8. EVkeg – made in the USA Thank you Copyright @ EV Container Corporation